Top Dayton Electric Gear Motors Reviews

Kitchen Basics 101 Universal Bathroom Vent Fan Motor Replacement Kit | 50 CFM

  • 50 CFM, 0.65 amps, 3000 rpm, 120 volts, 60Hz.
  • Motor is mechanically reversible - shipped CCW shaft end..
  • Shaft = 3/16 X 1 3/4 inch, wire length = 6 inch with 2-prong plug, mounting studs 1 7/8 inch on center..
  • Kit contains: 1x motor, 1x fan = 4.5 (flat/paddle style). Replacement for motors Nutone Broan, Uppco, Ventorola E498-1, Bay Motors, Sears 569, Dayton and many other units. Note: the brand and any related models mentioned above is only for compatibility demonstration..
  • This part by InnovativeSupply come with a 1 year, no questions asked, no hassle warr anty..
Check Stock

【Element Airsoft Official Store】Motor Gear Pinion Removal Install Tool RC Motor Pinion Gear Tool Motor Pinion Gear Remover Ffor AEG Motors Metal ARMY FORCE-TL002 BK EX121

  • Element airsoft 's name and element airsoft's quality. The best. Motor gear (pinion gear) tool ● Part number: EX 121. airsoft pinion gear puller.
  • With this tool, it is possible to attach and detach without burden.Mounting and dismounting are possible.The pinion remover is an essential tool for changing the pinion gear of the electric gun motor..
  • The motor pinion gear is usually press-fitted and installed, so it is almost impossible to detach it with a tool other than a dedicated tool..
  • The included small parts are grounded before and after the motor when the pinion gear is press-fitted..
  • * Please note that compatibility with D-type motors will be reduced！！！！It fits for O-type motors！！！！.
Check Stock

Vent Motor Assembly Part # 85598000

  • SM550 Universal Range Hood Vent Bathroom Fan Motor: 120 volts, 60Hz, 50CFM, 0.29A , 3000 Rpm. Replace Nutone Broan 65100 Bathroom Vent Fan Motor and Blower Wheel.
  • Kit contains: 1 x motor, 1 x fan = 4.5 (flat/paddle style).
  • Shaft approx. 3/16" x 1 3/4", wire length = 6" with 2-prong plug , Mounting studs 1 7/8" on center,5/8 Coil stack.
  • This motor is a replacement for motors Nutone Broan, Uppco, Ventorola E498-1, Bay Motors, Sears 569, Dayton and many other units. This motor is reversible CCW & CW Rotation . Replaces 65100, VFM100, C65878,33-100,82423K,EM550,K111,EM750,784A,f784a,676d/2676f,763rln and more.
  • Premium quality.For any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked.
Check Stock

Bathroom Vent Exhaust Fan Motor Replacement Electric Motors Kit Compatible with Nutone Broan 50CFM 120V 1 Piece

  • Bathroom exhaust fan replacement: 50CFM, 0.65 amps, 3000 Rpm, 120 volts, 60Hz.
  • Shaft = 3/16" x 1 3/4", wire length = 6" with 2-prong plug.
  • UL certified bathroom vent fan motor replacement kit: stable and durable.
  • Kit contains: 1 x motor, 1 x fan = 4.5 (flat/paddle style).
  • Replacement for motors Nutone Broan, Uppco, Ventorola E498-1, Bay Motors, Sears 569, Dayton and many other units. Note: the brand and any related models mentioned above is only for compatibility demonstration..
Check Stock

SAMDO LCD Universal Motorcycle Speedometer Gauge Odometer 5 Gear 7 Backlight 13000 RPM 199 KMH MPH Motorcycle Tachometer

  • Universal Speedometer fits tires size :10".
  • SAMDO Speedometer Gauge Fits for:single-cylinder, two-cylinder, four-cylinder carburetor motorcycle.
  • For Single cylinder and 2 cylinder motors, RPM....
  • SAMDO Motorcycle Speedometer Set Kmh to mph , Mph to Kmh freely,Support 1-5 Gear and N Gear.
  • Multi-function: Motorcycle Tachometer, odometer, fuel level, clock.
  • Particular Attention--SAMDO Digital Tachometer RPM does not compatible with Electric fule Injection (EFI) engine, if your motorbike is Electric fule....
Check Stock

Dayton 1TDP7 Blower Fan With Square Flange HVAC

  • New - Blower Motor Compatible with Dayton Model 1TDP7 -146CFM 3160 RPM, 1150V 60/50hz (4C446).
  • Replaces Part Numbers: A166, 1TDP7, 4C005, 4C446, 6FHX8, 7121-3469, 7021-3469 7021-7788, 7121-7788, 71213469, 70213469 70217788, 71217788.
Check Stock

SAMDO Universal Motorcycle Speedometer Odometer Tachometer RPM Speedometer Gauge 199 Kph Mph for Carburetor Motor

  • 1--SAMDO Universal Speedometer Gauge fits for all carburetor motorcycles with DC 12V, SAMDO Motorcycle Tachometer adjustable for 8-22 inch wheel.
  • 2--ALL-IN-ONE Function: Universal Speedometer, Odometer, Tachometer, Fuel Level Display, Left and Right Indicator, N Gear, Battery, Water Temperature Indicator..
  • 3--SAMDO Digital speedometer Fits for all style motorcycle ,1 cylinder, 2 cylinder and 4 cylinder( 4 stroke motorcycle disc-brake front tire ).
  • 4--SAMDO SPEEDOMETER Shift Speed display in Kilometers or Miles, For Single cylinder and 2 cylinder motors, RPM cable connects trigger signal line positive pole . For 4 cylinder motors, RPM cable connects ignition coil input Line ..
  • 5-- Particular Attention-- SAMDO Motorcycle Gauges RPM does not compatible with Electric fule Injection (EFI) engine, if your motorbike is Electric fule Injection (EFI) engine, RPM function would not work properly, other functions run well.
Check Stock

Micro Machines Playtronic MAX

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

RAB Lighting HAZXLED26FF-G Outdoor, Gray

  • A gear motor is a specific type of electrical motor that is designed to produce high torque..
  • Gear motors are primarily used to reduce speed in a series of gears, which in turn creates more torque..
  • Full metal gears would ensure a longer service life, high torque and less noise..
  • There are eight reduction gear motors of different speed and you can choose the one you need..
  • Gear motors can be found in many different applications, and are probably used in many devices in your home..
Check Stock

Fasco D133 3.3-Inch General Purpose Motor, 1/20 HP, 115 Volts, 1500 RPM, 1 Speed, 1.8 Amps, OAO Enclosure, CCWSE Rotation, Sleeve Bearing

  • Part Number: SM550, C01575 Replace most motors in Nutone, Fasco, Broan, Dayton and many other units..
  • 0.43 amps, 3000 rpm, 120 volts 60Hz, Mounting studs 1 7/8" on center..
Check Stock

Universal Bathroom Vent Fan Motor Replacement Electric Motors Kit SM550 Compatible with Nutone Broan 50 CFM120V Replace C01575 65100 EM550 EM750

  • SM550 Universal Bathroom Exhaust Fan Motor: 120 volts, 60Hz, 50CFM, 0.29A , 3000 Rpm. Replace Nutone Broan 65100 Bathroom Vent Fan Motor and Blower Wheel.
  • Kit contains: 1 x motor, 1 x fan = 4.5 (flat/paddle style).
  • Shaft approx. 3/16" x 1 3/4", wire length = 6" with 2-prong plug , Mounting studs 1 7/8" on center,5/8 Coil stack.
  • This motor is a replacement for motors Nutone Broan, Uppco, Ventorola E498-1, Bay Motors, Sears 569, Dayton and many other units. This motor is reversible CCW & CW Rotation . Replaces 65100, VFM100, C65878,33-100,82423K,EM550,K111,EM750,784A,f784a,676d/2676f,763rln and more.
  • Premium quality.For any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked.
Check Stock

Carolina Tarps Tarp Motor for Dump Truck 1.5hp 50:1 Universal 12V Electric Tarp System Motor

  • 50:1 Gear Ratio, 1.5 HP, 12V Direct Current, 40 Amps, Reversible Action, 44 NM Operating Torque. One of the FASTEST, Strongest Electric Tarp Motors Available..
  • UNIVERSAL FIT for Dump Bodies up to 28 feet. Dump Truck Tarp Motor has a 3/4 inch output shaft and a 5-bolt mounting pattern works with most Electric Tarp Systems..
  • Output shaft is 3/4 inches thick and 3-3/4 inches long with a 5/16" hole drilled at 1 inch and at 2 inches for best fit..
  • INCLUDES reflective chrome housing, all necessary mounting hardware, and 3-Year warranty.
  • 3-YEAR WARRANTY: This electric tarp motor will deliver years of speed, strength, and reliability under normal use. Due to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool. Recommended wire is 6 or 8 gauge..
Check Stock

TarpingUSA Apache Series Tarp Motor for Dump Truck 1.5hp 50:1 Universal 12V Electric Tarp System Motor

  • 3-YEAR WARRANTY: This electric tarp motor will deliver years of speed, strength, and reliability under normal use. Due to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool. Recommended wire is 6 or 8 gauge..
  • 50:1 GEAR RATIO, 1.5 HP, 12V Direct Current, 40 Amps, Reversible Action, 44 NM Operating Torque. One of the FASTEST, Strongest Electric Tarp Motors Available..
  • UNIVERSAL FIT FOR DUMP BODIES UP TO 28 FEET. Dump Truck Tarp Motor has a 3/4 inch output shaft and a 5-bolt mounting pattern works with most Electric Tarp Systems..
  • INCLUDES REFLECTIVE CHROME MOTOR COVER, all necessary mounting hardware, and 3-Year warranty.
  • OUTPUT SHAFT is 3/4 inches thick and 3-3/4 inches long with a 5/16" hole drilled at 1 inch and at 2 inches for best fit..
Check Stock