Top Daewoo 15 Ton Reviews

OTC UA22 22-Ton Under Axle Jack with Air Assist

  • OTC's UA22 22-Ton Under Axle Jack features air-assist operation and a self-retracting, spring return with a long, 47-1/4 in. T-handle that lets you easily position the jack under vehicles with long overhangs.
  • One pull of the handle activates the self-retracting, 4-1/2 in. stroke, 22-ton capacity ram, without having to crawl underneath the vehicle, while large rubber-tired steel wheels ensure maneuverability and movement on most types of terrain.
  • 3 inch diameter, round saddle, with center notch and 3 saddle attachments - 3/4 in. for 17-3/4 in. lift, 1-15/16 in. for 18-15/16 in. lift, and 3-7/8 in. for 20-2/3 in. lift, allowing height adjustments based on vehicle being lifted.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram offers additional rust resistance.
  • Wiper seals protect hydraulic system from contaminants.
  • Specifications: 22-ton capacity, 4-1/2 in. cylinder stroke, 4-1/4 in. extended screw length, 90-145 PSI, 8.27 in. to 20-2/3 in lifting range using longest saddle, 69.87 in. reach, 8.27 in. frame height, 11.73 in. x 22.63 in. footprint, 100 lb. weight.
Check Stock

MOSTPLUS Torsion Bar Unloading Tool Key Removal Compatible with GMC Chevy Ford Dodge Car Truck Auto

  • Forged steel construction: made for use on trucks with heavy duty chassis and a larger torsion bar.
  • Variety of Fitment: Compatible with GMC and Compatible with Chevrolet 1/2-ton, 3/4-ton, and 1-ton pickups (1988-2003), Compatible with GMC’s K-3500 series trucks, Compatible with S-10 Blazer, Compatible with S-15 Jimmy, 4WD pickups with 4.3L V8 engines, and Compatible with Oldsmobile Bravada (1991-2001).
  • Larger Threads: 7/8-inch diameter threads.
  • Large C-frame Opening: Accommodates beefier torsion bars.
  • Work in safety: designed to hold the torsion bar while you make adjustments to your vehicle.
Check Stock

Jackco 3 Ton Low Profile Aluminum Racing Floor Jack with 3 Ton Aluminum Jack Stands

  • 3 Ton Aluminum Low Profile Racing Jack: Aircraft billet aluminum construction Dual Plunger for quick lift.
  • 3 Ton Aluminum Jack Stands: Aircraft-grade aluminum Lightweight - less than 5 lbs. each 6 adjusting positions from 9.5” to 15.25”.
Check Stock

2-Pack Replacement 203500 Microwave Turntable Glass Plate for Sharp, Magic Chef, Emerson, Daewoo, Hinari - Compatible with Sharp R331ZS, Sharp R309YK, Sharp R309YW - 11 1/4' (285mm)

  • Replacement 203500 Microwave Turntable Glass Plate - Compatible with Sharp R309YV, Magic Chef MCO160UW, Magic Chef MCO165UB, Magic Chef MCO160UB, Magic Chef MCO165UW, Magic Chef MCO160S, Magic Chef MCD991ARB, Magic Chef MCD990SC, Magic Chef MCD990B, Daewoo KOG867T9, Magic Chef MCO160UQ, Daewoo KOR1N0A.
  • Replaces 203500 Microwave Glass Turntable Plate.
  • Replace your broken microwave glass plate with the same great quality as the original at a more economical price..
  • An essential part of your microwave. This tray is rotated when the microwave is turned on to heat or cook your food evenly..
Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 6 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/4"..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 6 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [PARAMETER] - Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-....
Check Stock

Replacement 203500 Microwave Turntable Glass Plate for Sharp, Magic Chef, Emerson, Daewoo, Hinari - Compatible with Sharp R331ZS, Sharp R309YK, Sharp R309YW Magic Chef MCD990ARB - 11 1/4' (285mm)

  • Replacement 203500 Microwave Turntable Glass Plate - Compatible with Sharp R309YV, Magic Chef MCO160UW, Magic Chef MCO165UB, Magic Chef MCO160UB, Magic Chef MCO165UW, Magic Chef MCO160S, Magic Chef MCD991ARB, Magic Chef MCD990SC, Magic Chef MCD990B, Daewoo KOG867T9, Magic Chef MCO160UQ, Daewoo KOR1N0A.
  • Replaces 203500 Microwave Glass Turntable Plate.
  • Replace your broken microwave glass plate with the same great quality as the original at a more economical price..
  • An essential part of your microwave. This tray is rotated when the microwave is turned on to heat or cook your food evenly..
Check Stock

5 Gallon Bubble Magic Washing Machine + Ice Hash Extraction 5 Bags Kit

  • The machine is made of 6061 aluminum, 4-piece of chrome steel and 12 ton hydraulic cylinder..
  • Dual heating rods for each 4x7" heated platen - 300 watts per rod, 1,200 watts in total..
  • Recommend pairing it with 12 ton hydraulic hand pump (dp-cp590g) or other pump with NPT 1/4" male coupler..
  • Both PID temp controller and hydraulic cylinder allow replacing for a long service life..
  • Dual 15mm thick insulation wood to protect the equipment from overheating..
Check Stock

Electric 50 Ton Hydraulic Shop Press Brake Bender Bending 3 Phase 220 Volt

  • Cylinder Max Pressure 25MPA,TONNAGE: 502 KN.
  • Worktable Size: 13-1/2" x 30-1/2" x 1-1/8".
  • Overall dimension: 50" x 20" x 66-1/2" (crate: 59" x26" x 78") *estimate only*.
  • Weight G.W. / N.W. : 1,529 lbs / 1,372 lbs *estimate only*.
Check Stock

BEAMNOVA Knockout Punch Set 15 Ton 1/2 to 4 Inch Hydraulic Metal Hole Punch Tools Set Hole Puncher with Case

  • QUALITY STEEL - Made of high hardness metal, durable, and not easy to deform..
  • MAX 15-TON PRESSURE - With a hydraulic pump, the Integrally Cast Cylinder Head has max 15-ton punching pressure, which allows you to punch holes with little burrs and effort..
  • SAFE - BEAMNOVA Hydraulic Hole Punch Kit features a rotatable ON / OFF switch for more safety..
  • COMPLETE KIT - The Metal Hole Punch Tools Set comes with 10 interchangeable dies and 2 draw studs of different sizes to meet multiple hole punching needs. A metal storage case with a handle for easy carrying..
  • WIDELY APPLICABLE - The Metal Hole Punching Set accommodates most materials such as stainless steel, aluminum, steel, plastic, etc. This toolset is great for installing and repairing wire pipelines, signal lamps, and instruments in metallurgy, petrol, electronics, electrical appliance, chemical industry, ship & machinery, and so on..
Check Stock

OTC 6290A Front Hub Puller

  • necessary for wheel bearing or brake rotor service.
  • Provides the mechanical advantage and straight pull not possible with a slide hammer.
  • Services 1988-2013 GM 1/2-ton, 3/4-ton, and 1-ton trucks, Tahoe, Suburban, and Yukon.
  • Services 1994-2013 Dodge 3/4-ton and 1-ton RAM trucks.
  • Services 1998-2013 Ford 3/4-ton and 1-ton trucks and Excursion.
Check Stock

ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service

  • STAY SAFE IN ANY ROADSIDE EMERGENCY: We all hope the day never comes, but if you get stuck with a roadside emergency, the ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service is a quick and easy car repair toolkit solution for all of your troubles.
  • ELECTRIC IMPACT WRENCH: Includes fuse, 2 chrome vanadium steel (CR-V) wheel nut socket adapters 17-19mm 21-23mm, and 11.5-foot (3.5m) long power cable with a 12V auto cigarette lighter adapter.
  • 12V DC with 12A maximum current, 100W rated power, 340N.M maximum torque.
  • 2-IN-1 ELECTRIC HYDRAULIC JACK/INFLATOR: Jack – Self-locking, 12V DC input, 150W rated power, 13A max current, 15A fuse, 11.5ft (3.5m) power cable, 3-Ton (2.7MT) loading weight, 6.1-17.7in (15.5mm-45mm) lifting height, 5°F to 122°F (-15°C-50°C) working temp.
  • Inflator – Needle heads, 12V cigarette lighter fuse, six-angle spanner.
  • 12V DC input, 35L/min inflating speed, 10A max current, 150 PSI (10 BAR) max pressure, 23.6in (60cm) air hose length.
Check Stock

DAYUAN 12pcs Bearing Separator Puller Set, Heavy Duty 5 Ton Capacity 2\ and 3\ Bearings Splitters Puller Kit

  • Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock

ABN Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit

  • Practical: Use the ABN Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock