Top Dac Amp Combo Reviews

Topping DX7 Pro LDAC Headphone Amplifier ES9038PRO DAC DSD1024 32bit/768kHz BT/USB/Opt/Coax/AES/IIS Input Amplifiers(Black)

♫ DAC&Headphone Amplifier: DX7pro is an all-in-one machine.
it uses uses ESS DAC ES9038PRO+XMOS XU208 chips,the distortion is .
♫ Multiple Input Interfaces: USB supports PCM32bit/768KHZ DSD512(native).
IIS supports 32bit/768kHz DSD64-DSD256(Dop) DSD64-DSD1024(Native)..
♫ DAC+Pre Amp application: DX7 Pro has a "Pre amp" output mode. When you connect to an amplifier, a power amp/active speaker, you can adjust the volume on the DX7 Pro to solve the system settings..
♫ The DX7 Pro uses digital volume adjustment, the left and right channels were controlled by digital so there will no unbalanced occurs..
♫ Pure DAC Application: DX7Pro has a built-in "DAC" output mode. At this mode,in order to achieve the best performance and cooperate with other devices in the system, the headphone amp wilt turn off and the volume will be uncontrollable..

Check Stock

Gustard R26 Discrete R2R MQA DAC K2 Clock Dual Native DSD Decoder XMOS Balanced LDAC DAC with Remote Control (Silver)

【Discrete R2R DAC】R-2R ladder DAC converts the digital signal to analog signal by switching resistor's array. 【XMOS XU216】DAC-R26 using 2nd XMOS XU216, supports up to PCM768 & DSD512..
【1Bit DAC Native】1 Bit DAC, supports DSD 512 ( via USB ) and DSD 1024( via IIS ) .The DSD stream is decoded by the independent 1 Bit DAC without DSD to PCM converting..
【Clock Synthesis】DAC-R26 adopts ultra-low noise clock synthesizer K2 clock . Provide an accurate clock from the local oscillator or external clock input. The interference from the input source clock is avoided..
【LPF Of DAC-R26】The discrete circuits of the DAC-R26 control every detail of sound and performance. LPF is specifically designed for the D/A converter using discrete devices..
【Full MQA decoding】The DAC-R26's USB/OPT/COAX/AES/IIS inputs all support full MQA decoding, PCM44.1kHz-384kHz. Presenting you with a complete and rich music scene..

Check Stock

Topping DX5 MQA DAC Headphone Amp USB/Optical/Coaxial Full MQA Decoding DA Converter Bluetooth LDAC XLR/RCA Output 6.35mm/4-Pin XLR Headphone Output 1800mW×1800mW NFCA Headphone Amplifier (Grey)

【2×ES9068AS DAC】With careful engineering and attention to details from out engineering team, TOPPING are able to achieve 0.00009% THD+N by 2 × ES9068AS. This provides pristine sound quality..
【MQA Full DAC】Products with a full MQA Decoder, like DX5 DAC, unfold the file to deliver the highest possible sound quality. At this level of playback you are hearing what the artists created in the studio..
【Bluetooth Transmission】To get even better sound quality from Bluetooth, TOPPING does not use the built-in DAC of QCC5125 and connect it's digital signal to 2×ES9068AS to decode..
【NFCA Headphone Amp】The new DX5 has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMS and power hungry high impedance headphones nicely..
【Multiple Output Mode】Adapt to different usage scenarios, DX5 has 4 output mode: Headphone Amp / Headphone Amp&Line out / DAC / Pre-amplifier..

Check Stock

RME ADI-2 DAC FS Ultra-Fidelity PCM/DSD DA Converter with AKG K240 Studio Pro Headphones & 10-Pack Straps Bundle

Dual AK4499EX & AK4191 DAC Chips ▶️ The GUSTARD A26 DAC combines two AK4499EX DAC chips with one AK4191 modulator from Asahi Kasei Microdevices. With independent power supply and grounding for each channel, separate digital-analog architecture eliminates interferences from the beginning..
FPGA Exclusive Technology & Streamer / Renderer ▶️ Adopting FPGA exclusive technology, the A26 features signal routing, clock management, 2rd order PLL, DOP decoding, and Depop for PCM & DSD. Besides, utilizing Streamer/Renderer, an easy access to high-quality online streams, the GUSTARD A26 can supports Roon /UPnP /HQ Player NAA at present, and there will be more protocols in the future..
Clock Synthetization & XMOS XU216 Solution ▶️ Equipped with K2, ultra-low noise clock synthesizer, the A26 DAC features a precision clock from local oscillators or external clock in. It is worth mentioning that the GUSTARD A26 can replace the input signal' s clock with precision oscillators (local or external) and avoid the interference from the input source' s clock. In addition, the A26 DAC applies XU216 from XMOS, supporting up to PCM768 (with MQA-support) and ....

Check Stock

Lavaudio USB Headphone Amp Portable Desktop DAC 32Bit 384Khz CS43198 and Native DSD256 Hi-Res HiFi Headphone Amplifier 3.5mm/Type C/Lightning Out for PC/Smartphone Home Audio/ DS100

【HIGHEST FIDELITY SOUND】Lavaudio DS100 DAC AMP uses CS43198 chips, with a special clock recovery capability, and the sound quality can be....
【Mini HiFi Audio DAC Amp】Lavaudio DS100 Portable USB DAC Amp (Android version) can be compatible with most Android phones which have a TYPE C....
【Headphone Amplifier Product parameter】Lavaudio 2022 Android/iOS/PC, DSD256 32Bit 384Khz. Type C/Lightning USB to 3,5mm AUX. Experience an....
【Hi-Res】Please download the Hiby player, import music in DSD256 format, and immediately enjoy the crystal music texture. Please make sure your....
【Hassle-Free Service】If you have any problems with Lavaudio DS100 DAC Headphone Amplifier, please feel free to contact us (email) and we will....

Check Stock

Portable Headphone Amplifier USB Type C to 3.5mm Adapter DAC ALC5686 32bits/384KHz Headset Amp for Samsung Android iOS Windows Mac OS X System Smartphone PC Laptop S22 S20+ S20 Ultra – Blue Sliver

[Hi-Fi Lossless Sound]: USB C DAC Built-in high-resolution ALC5686 DAC chipset, our portable DAC Amp fully enhances the sound quality of mobile phones while providing excellent headset drive capability. Ultra-low power dissipation extends the playback time..
[Lowest Noise & Hi-RES DAC Performance]: Headphone dac improves the signal-to-noise ratio to 124dB, and the sound quality is improved 3 times more than your ordinary mobile phones. Delivers a THD+N down to -94dB for you to enjoy matchless HiFi sound and maintain the original sound quality of the headphone. Impedance is 600Ω..
[HI-RES Audio Output Capability]: The dongle dac cable passed the Hi-Res certification. Its DAC chip helps your mobile phones achieve 32bit/384kHz Hi-Res output capability..
[Ultra Portable & Durable DAC]: Headphone dac amp with a lightweight handmade design, you can put our Hi-Fi headphone cable anytime anywhere. Pure quad-core copper wire, precision construction, and quality materials. The cable uses a special weaving technology. It looks elegant. It feels soft, easy to store, and won’t get tangled..
[Plug and Play]: This 3.5mm to USB c is not needed to install software, drive, or complex connection mode, plug and play. Let you use the simplest way to enjoy wonderful m....

Check Stock

TOPPING D10 Balanced Mini USB DAC CSS XMOS XU208 ES9018K2M OPA2134 Audio Amplifier Decoder Sliver (Renewed)

♫ Upgraded version TOPPING D10s USB DAC: Customized Thesycon driver + XMOS XU208 + ES9038Q2M + OP..
♫ Automatic power on/off: Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC..
♫ Audio format andsampling rate indicator: D10s can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night..
♫ Multiple connections: D10s could connect with your active speakers. It could connect to power/headphone amp. If you have a better DAC , you can connect the coaxial /optical output of D10s to your DAC , then D10s serves as a USB interface ..
♫ OP-AMP Rolling, D10s has OP amp socket, Diyer could change the OP amp to get different sound. Any question, please contact the after service team..

Check Stock

Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)

Bluetooth 5.0 LDAC transmission ：DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode..
NFCA circuit ：The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely..
Pre-amplifier function ：Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier..
PA3s is the best power amplifier for DX3 Pro+： PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x [email protected]Ω, 10%THD+N, 65W X [email protected]Ω, 1%THD+N can be adapted to most situations where speakers are used..
Bluetooth headphone amp / Bluetooth DAC application： Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth....

Check Stock

Topping D10s HiFi DAC USB DAC XU208 ES9038Q2M DSD256 32bit/384kHz Coax/Opt/RCA Output Mini Desktop Audio Decoder(Black)

♫ Upgraded version TOPPING D10s USB DAC: Customized Thesycon driver + XMOS XU208 + ES9038Q2M + OP..
♫ Automatic power on/off: Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC..
♫ Audio format andsampling rate indicator: D10s can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night..
♫ Multiple connections: D10s could connect with your active speakers. It could connect to power/headphone amp. If you have a better DAC , you can connect the coaxial /optical output of D10s to your DAC , then D10s serves as a USB interface ..
♫ OP-AMP Rolling, D10s has OP amp socket, Diyer could change the OP amp to get different sound. Any question, please contact the after service team..

Check Stock

Lavaudio Headphone Amp Portable Desktop DAC 768kHz/32Bit and Native DSD512 USB Type-C Hi-Res Stereo Headphone Amplifier 3.5/4.4mm/Coaxial/Optical Out for PC/Laptop/Smartphones/Speaker Home Audio DS400

High-performance DAC and USB Decoding Chip: The XMOS chip is matched with the ES9038Q2M independent DAC chip, which makes the DS400 have advanced decoding capabilities, which can support up to 768kHz/32bit PCM decoding and DSD512.
The DS400's dual crystal oscillators assure that any digital audio signals being passed into the DAC are exactly accurate further enhancing sound quality..
Lavaudio Headphone Amp: Compatible with high-quality, high-impedence (from 16-600 ohms) headphones, help your headphones drive better. It is delicate, compact, lightweight, and portable. Aluminum alloy casing, durable overall Shielding reduces signal interference and enhances heat resistance..
Gain Switch & Bass Boost: Gain controls the signal input Into the amp circuit for optimal performance of the headphones. while the bass boost satisfies different listener's preferences when listening to various types of music, providing more delicate and mellow bass performance, so your music is genuinely played back faithfully..
Simply Reliable USB Power: DS400 headphone amplifier is the modern USB Type-C input interface for a more reliable....

Check Stock

USB Desktop DAC Decoder - Audio Amplifier DAC for Headphone Amps and Active Speakers, Amplifiers, Thesycon Driver XMOS XU208 ES9018K2M Replaceable OPA2134 for DIY, DSD256 PCM44.1-384kHz/32bit

[Desktop DAC Designed for Hi-Fi Sound] All Aluminium Alloy shell to keep the purity of the sound, exclusively designed for the HiFi Audiophile, gold plated PCB, THD+N is as low as 0.0008%. Auto Power On/Off, it will synchronously power on/off with the PC..
[Connect to Active Speakers] AD10 decoder provide not only DSD decoding and higher resolution PCM compatibility but also a better sound quality than computer's built-in sound card or a regular DAC. To be a DAC when connect to power amplifier or headphone amp..
[Replaceable OP for DIY] AD10 has OP amp socket, DIY player could change the OP amp to meet different needs. LED Screen show orange indicator of format (PCM or DSD) and sampling rate of the playing music. Customized Thesycon driver + XMOS XU208 + ES9018K2M + OPA2134..
[Efficient Decoding Capability] RCA/ Optical/ Coaxial Output, USB decoding Input which supports DSD64-DSD256(Native) and PCM44.1kHz-384kHz/ 16bit-32bit. Aimpire DAC decoder is designed for Hi-Fi audio file especially DSD native..
[XMOS XU208 and Customized Driver] XMOS XU208 provide very good resolution for US....

Check Stock

đặc Khu A

The GameDAC dedicated DAC and headphone amp transforms any PS4 or PC into a high-performance audio source by bypassing the low fidelity, poor quality....
Gaming's first certified Hi-Res Audio system ensures that you hear high-fidelity 96 kHz / 24 bit audio at its purest full resolution with no....
Arctis Pro + GameDAC is the first gaming headset system to include the legendary ESS Sabre DAC and amp for unsurpassed audio quality with 121 dB of....
Premium Hi-Res speakers with high-density neodymium magnets reproduce a full, expansive frequency range from 10 - 40,000 Hz with stunning realism and....

Check Stock

HIFIMAN EF400 Desktop Balanced Headphone DAC& Amplifier with Himalaya R2R DAC, 3.5/4.4/6.35mm Output for Home Audio

Massive power and superior sound from a sleek and stylish chassis: The EF400 is the modern desktop DAC/Amp solution, with a compact footprint and price to match, but with sonics that outperform products many times its size. Ultra-high efficiency and low power consumption at maximum stability:4.4W per channel balance output. Embedded with HIFIMAN HIMALAYA R2R DAC- Recipient of 2022 VGP Gold Technology Award (Japan)..
Experience the prized performance of the R2R DAC: HIMALAYA is a discrete R2R DAC (digital-to-analog) module that is based on the FPGA algorithm. The combinations of its low audio frequency range, out-of-band noise, and low energy consumption make it a perfect match for high-performance audio equipment. The HIMALAYA DAC module supports the standard PCM music signal transmitted by the most common IIS (Integrated Interface of Sound) audio interface, with a maximum resolution of 24Bit..
Full Balance: The four-channel differential structure features a DAC, buffer and active filter that add up to unbeatable fully balanced output for stunning performance from a Class AB DAC/amplifier. The four-channel fully differential amplifier circuit features a maximum output of 10.7 Vrms (THD.
4-level Function Switch: High Gain NOS, High Gain OS, Low Gain OS, ....

Check Stock