Top Cylinder Sleeve Reviews

J-35791 Cylinder Liner Puller Remover Tool Sleeve Puller Removal Tool Fit For Non-EGR Detroit Diesel 50 & 60 Series Engines & Volvo D12 D13 D16 Engines Replace For J-35791 M30143

APPLICATION: The J-35791 cylinder liner puller remover tool is compatible with the Non-EGR Detroit Diesel 50 & 60 Series engines and Volvo D12 D13 D16 engines..
FUNCTION: The cylinder liner puller removal tool used to safely and quickly remove the cylinder liner and reduce the damage to the cylinder in the disassembly process. Save your time and your money..
REPLACE FOR : This tool replace for cylinder liner puller remover tool part # J-35791 M30143..
MATERIAL: The cylinder sleeve puller removal tool is made of steel, coated with silver finish, anti-rust and anti-corrosion, provide a long lifespan..
Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product..

Check Stock

Kryptonite 994589 New York Lock M-18WL

Maximum security U-lock for high theft areas.
Cross bar is shielded by a hardened Kryptonium steel sleeve in a double crossbar design for double security.
High security anti-pick disc-style cylinder with patented double deadbolt lock.
Flat key with integrated sliding dustcover protects the cylinder.

Check Stock

OTC 1205 Universal Cylinder Sleeve Puller for Wet-Type Sleeves in Heavy-Duty Engines

This tool removes cylinder sleeves faster than ordinary pullers because it requires little setup time - cone adjustment positions puller jaws quickly....
To break 'frozen' sleeves loose, adjustable bridge is positioned on the cylinder block then bearing-mounted forcing nut is tightened.
Next, bridge is removed and slide hammer assembly is attached - with a few sharp hammer blows from the 5 lb. hammer, sleeve is pulled - an average of....
Does not require any special adapters to pull sleeves due to adjustable jaw design.
adjustable jaws allow use on cylinder sleeves ranging from 3....
High-grade materials ensure quality performance over the lifetime of the tool.

Check Stock

NorthStar Horizontal/Vertical Log Splitter - 30-Ton 200cc Honda GX200 Engine

Honda commercial GX200 series engine with cast iron cylinder sleeve, low oil shutdown and steel fuel tank.
American-made Concentric pump and Brand valve.
NorthStar hydraulic cylinder with premium Halite seals.
Auto throttle control to save fuel, reduce noise and prolong engine life.

Check Stock

Fleck 60102-20 5600 Piston Assembly Low Water

Cast iron cylinder sleeve, must bore and hone to finished size..
See "Product Description" for complete Application List.

Check Stock

6434 Sleeve Height & Counter Bore Gauge for All Diesel Engines Range 0-1.00 Graduation 0.001 Reading 0-100

【Wide Applications】 6434 1 in. Dial Indicator Sleeve Height and Counter Bore Gauge is compatible with all diesel engines with sleeved cylinders. Helps quick and easy to measure the cylinder sleeve height, counter bore depth, top dead center, piston-to-deck height, valve protrusion..
【Precise Measurement】 Range: 0-1.00". Graduation: 0.001". Reading: 0-100. Easy readings around entire bore. 4374- Dial Indicator.
【Perfect Design】 Pointed contact for measuring cylinder sleeve height. Flat end contact measures counter-bore depth. Compact and versatile gauge also measures top dead center, piston-to-deck height and valve protrusion. Easy to use, impossible to mess up..
【Built to Last】 Made of real steel hardened, professional and quality. Heavier, stronger and more durable. Not so easy to be deformed, more shock-proof, professional quality and industrial use..
【100% Satisfaction Guarantee】 Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty..

Check Stock

NorthStar Horizontal/Vertical Log Wood Splitter - 37-Ton, 270cc Honda GX270 Engine

Honda commercial GX270 series engine with cast iron cylinder sleeve, low oil shutdown and steel fuel tank.
American-made Concentric pump and Brand valve.
NorthStar hydraulic cylinder with premium Halite seals.
Auto throttle control to save fuel, reduce noise and prolong engine life.

Check Stock

Powermate PX P024-0293SP Heavy Duty Air Hammer

Steel sleeve inside cylinder absorbs direct shock increasing wear resistance of tool.
Double threaded hammer cylinder allows a more solid impact.
Soft-touch grip for firm hold and reduced vibration.
Professional touch trigger adds comfort and gives user better start/stop control.
Handle exhaust keeps heat away from work surface.
Quick-change chisel retainer makes changing chisels quick and easy.
Includes 4 carbon steel long chisels - Cold chisel, ripping chisel, punch, and panel cutter.
Perfect for cutting, chipping, piercing, scraping.

Check Stock

Niome 17 Teeth Auto Clutch Set For 50cc 110cc 125cc 135cc Go Kart ATV Quad Dirt Bike

1. Product Introduction: This 100cc bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle with easy installation..
2. Product Compatibility: Replacement for most 26 bikes..
3. Safer Upgrades: 4 bolts attach the engine to your bike frame and this kit comes are 8mm vs the standard 6mm. That means the mounts are twice as strong and twice as secure..
4. High Quality Cylinder: Using high-quality iron sleeve cylinder, the use of enlarged cylinder head makes the machine have the effect of high speed, good heat dissipation and low vibration..
5. Note: Please check the pictures and product information carefully before purchasing to make sure it is what you need..

Check Stock

KK-4835 Compressor Piston Kit - Connecting Rod Replacement Kit Perfectly Fits for Craftsman Devildiss Dewalt Porter Cable Oil Free Air Compressor Pump, Comparable to KK-4835 KK-5081 A02743

【High Performance】Direct replacement for KK-4835 KK-5081 & A02743 both in quality and functions. Specially designed to easily & properly service the oil free air compressor pumps for DeVilbiss and the most current style coated cylinder sleeve, extend the life of the compressor..
【Package Includes】1 x Connecting Rod, 1 x Piston Ring, 1 x Cylinder Sleeve, 2 x O-Ring that go on the valve plate and cylinder. This KK-4835 Piston Kit is new and never been used..
【Superior Material】Made from solid 6061 Aluminum, CNC process precision manufacturing, impact-resistant, corrosion and wear resistance, features with the capability of handling literally tons of pressure, ensures long term reliable service..
【100% Satisfaction Guarantee】If you're not satisfied with our Heavy Duty Replacement Compressor Connecting Rod Kit KK-4835, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!.

Check Stock

Dixie EMS Ultimate Pro Trauma O2 Backpack with Modular Pouch Design, Oxygen Gear Bag for First Responders and Medics – Orange

O2 BACKPACK – Designed for easy transportation of an oxygen tank, accessories, and other trauma supplies for emergency situations where oxygen is needed..
MODULAR DESIGN – The backpack consists of a padded O2 cylinder removable carrier sleeve, six color-coded removable pockets, and two zippered side pockets. This system makes it easy to customize the organization of supplies so you can quickly reach for what you need in emergencies..
HIGH-QUALITY DETAILS – The backpack is made with high-quality 1680D polyester fabric. It is equipped with padded shoulder straps for added comfort, chest and waist straps, heavy-duty coated zippers, a plastic handle, reflective stripes for safety, and a white star of life printed on the front..
HOLDS D SIZE CYLINDER – This backpack is large and can hold a standard D size oxygen cylinder..
SUPPLIES NOT INCLUDED – This order is for a backpack only. Supplies are NOT included..

Check Stock

Moroso 9766M Spark Plug Wire

Blue Max Solid Core Universal Wire Set, Spark Plug Boot: 90 degrees, Coil Wire Length: 36".
Pre-terminated at the plug end with either straight or 90º boots.
Sets contain both HEI and Non-HEI terminals and boots to terminate-your-own distributor/magneto wire ends.
Sets can also be used in part for 2-, 4- and 6-cylinder applications.
For a professional installation use with Moroso Insulating Sleeve Nos. 72000, 72002 or 72004 Shrink Sleeve Nos. 72030 or 72031, Spark Plug.

Check Stock

NEWZQ Tilt Trim Motor with Reservoir 809885A1 809885A2 for Mer-cury Mar-iner Fo-rce, Mer-cury/Mariner Outboards(Single Ram) Late Model 50-150HP, Fo-rce Outboards(Double Ram) 50-125HP

OTC Cylinder Sleeve Removal Plates are designed to work in conjunction with OTC manual (no. 1200) and hydraulic (1202 and 1203) cylinder sleeve puller sets.
For use when pulling sleeves on truck, bus, and tractor engines, as well as those in other vehicles.
Cast and machined heavy duty steel for durability under repeated use.
Plate measures 4.980 O.D, 4.860 I.D. (+.010 -.000).
For 4-7/8 inch bore Cummins N and NH series engines, and Mack ENDT - 672 engine.

Check Stock