Top Cylinder Slag Cooler Reviews

Makita MAC2400 2.5 HP* Big Bore™ Air Compressor

  • Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance.
  • Powerful 2.5 HP 4-Pole motor produces 4.2 CFM at 90 PSI for increased productivity and lower noise.
  • Roll-cage construction provides complete protection to withstand extreme jobsite environments.
  • Low AMP draw reduces incidences of tripped breakers at start-up.
  • Pump is oil-lubricated for cooler running temperatures and reduced wear.
  • Oil lubricated: Cooler running pump, minimizes wear.
  • Durable cast iron cylinder reduces wear and increases pump life.
  • Powerful 2.5 HP 4 Pole motor produces 4.2 CFM at 90 PSI for increased productivity.
  • Large automotive style industrial air filter for increased air intake and greater efficiency.
  • Pump runs at lower RPM (1,730) resulting in lower noise (79dB) and improved pump durability.
Check Stock

Topteng Chainsaw 22 Inch Gas Power, 22\ 52CC Gasoline Chainsaw Cutting Wood Gas Sawing Aluminum Crankcase Chain Saw Set

  • ★The anti-kickback chain decreases the probability of kickback, which increases safety. In addition, it also can be used under extreme environment with long life due to aluminum solid protection..
  • ★It adopts the automatic brake system with wide designed front hand guard, which is able to reduce injury during operating..
  • ★Displacement:52CC. Engine: single cylinder, air cooler, 2-stroke..
  • ★It is also able to efficiently prevent the dust enter the engine by engine clean air-intake system. It also features with anti-vibration design, which allows you to use it easily..
Check Stock

Topteng Chainsaw 20 Inch Gas Power, 20' 52CC Gasoline Chainsaw Cutting Wood Gas Sawing Aluminum Crankcase Chain Saw Set

  • ★The anti-kickback chain decreases the probability of kickback, which increases safety. In addition, it also can be used under extreme environment with long life due to aluminum solid protection..
  • ★It adopts the automatic brake system with wide designed front hand guard, which is able to reduce injury during operating..
  • ★Displacement:52CC. Engine: single cylinder, air cooler, 2-stroke..
  • ★It is also able to efficiently prevent the dust enter the engine by engine clean air-intake system. It also features with anti-vibration design, which allows you to use it easily..
Check Stock

FLASLD FLASLD Acrylic Coated Welding Blanket,Fireproof Fiberglass Fire Blanket, Welding Curtain for Industrial and Home Use (6 ft x 8 ft, Yellow)

  • FLASLD acrylic welding blanket is used in welding, cutting, laser welding, and soldering. It has a temperature resistance of 1472 ℉, which can effectively resist welding slag, cutting sparks, and flames. It can protect your important equipment and workshop from Damaged by welding slag or high temperature..
  • Do you know what is the most troublesome thing in the use of the welding blanket? Yes, it's the tiny glass fiber debris, it's almost an unavoidable problem, it will irritate the skin and cause itching, if you accidentally inhale it, it will also cause damage to the lungs, FLASLD coats the acrylic on the welding blanket, the acrylic and fiberglass are tightly bonded together, there is no fiberglass debris, no itch and lung damage!.
  • The FLASLD acrylic welding blanket is made of 0.5mm thick alkali-free fiberglass cloth and coated with acrylic on both sides. Compared with ordinary welding blankets, it has higher temperature resistance and is more durable, It weighs 600g per square meter, is lightweight, foldable and easy to carry..
  • We have added multiple grommets to the edge of the FLASLD acrylic welding blanket, it is easy to hang and fix, it can be used as a welding curtain to block welding arc light and welding slag, we provide 5 sizes and two colors....
Check Stock

Makita MAC5200 3.0 HP* Big Bore™ Air Compressor

  • Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance.
  • Powerful 3.0 HP motor produces 6.5 CFM at 90 PSI for increased productivity.
  • Pump is oil-lubricated for cooler running temperatures and reduced wear.
  • Durable cast iron cylinder reduces wear and increases pump life.
  • Folding handle with low profile design for easy storage with handle folded.
Check Stock

Briggs & Stratton 130G32-0022-F1 Briggs and Stratton 9.5 GT Horizontal Shaft Engine Black

  • Dura-Bore cast iron cylinder sleeve for extended life.
  • Maintenance-free Magnetron electronic ignition for quick, dependable starts.
  • Overhead valve design (OHV) for cooler operation and long valve life.
Check Stock

CHOWEL BHS-W330 Welding Chipping Hammer Slag Removal Tool with Forged Construction Shock Reduction Grip & lightweight 13oz

  • High-Quality Slag Remover Chipping / Welding Hammer.
  • Perfect for cleaning and removing slag from all welds.
  • Rubber grip for durable, reduce impact and prevention for slip out from the hand.
  • It's designed as Slag and Chipping hammer for welding. Please do not use this chipping hammer as a chopping Axe or Sledge Hammer..
Check Stock

Walter Surface Technologies 53F605 E-Weld Plasma Protection Liquid (10 Kg) - Ceramic Fluid for Plasma Cutting Tables. Anti-Spatter Solution

  • Anti-Spatter Liquid: ceramic anti-spatter solution can be safely applied to cutting tables to reduce the buildup of slag over time. It also decreases the amount of time and effort required in cleaning the slag off the tables.
  • Functions: prevent the creation of uneven cutting surfaces with this plasma solution. It also helps in increasing the lifespan of the equipment it is applied on.
  • Efficiency: it serves as a preventive measure in keeping the slag from adhering to slats of cutting tables. This protective solution decreases the time, efforts, and costs required in equipment maintenance and helps generating revenues.
  • Usage: use anti-spatter liquid with easy-to-use E-weld arm-mounted sprayer that applies a thin layer over the surface to prevent any wastage. The anti-spatter liquid is available in a 10 kg container, which is enough to cover 50-100 square meters.
Check Stock

PROSHI Compact air needle scaler remove slag rust paint and dirt quickly with this needle scaler

  • Air pneumatic needle slag cleaner deburring tool removing tool rust corrosion slag remove cleaning Tool..
  • 12 hardened 3mm steel needles remove weld slag, rust, paint, and dirt. working trip: 6-7mm, blows per minute: 4000bpm.
  • One-trigger-operation eliminates complicated preparing steps and is easy to use. Meanwhile, a professional touch trigger not only adds comfort but....
  • With its compact size and excellent performance, this lightweight needle rust remover is designed to clean smaller surfaces without messy abrasive....
  • Needle scaler easy adjustment without special tools. What's more, it features an exhaust design that keeps the human body away from dust, and....
Check Stock

Rustark 3 Pack Scratch Wire Brush Slag Removal Tool Kit With Welding Leather Gloves, 10 Inch Welding Chipping Hammer and Wirebrush, Welding Slag Removal Tool for Cleaning Removing Slag

  • 【What you Get】The welding slag remover set contains 1 pcs welding slag hammer, 1 pcs welding slag brush, 1 pairs welding gloves, totally 3 pcs. Full and convenient welding slay removal tool for you, saving your energy to looking for extra tool. In addition, offer reliable after-sale service.
  • Pls feel free contact us for any dissatisfaction. We will reply you within 12 hours for your satisfaction..
  • 【Welding Chipping Hammer】Made of durable high strength steel with multi-layer black powder coated for rust-resistance. Dual-head design with flat chisel on one end and point chisel on the other end, allowing it easier to use in tight and small space.The spring handle is designed to reduce the impact forces of contact. Coil Spring handle design for absorbing the shock of contact while cleaning and shipping way welding debris..
  • 【Steel Wire Scratch Brush】Made of solid stainless steel, wooden handle with pre-drilled hole for hanging, sturdy and durable, long service time. 252 mm in totally length, proper size for easier grip. Ideal for aggressive cleaning and removing rust and paint from most surfaces..
  • 【Protective Welding Gloves】 Made from thick and soft shoulder split natural cowhide leather with heat resistance,wear-resistance,puncture resista....
Check Stock

Welding hammer/Slag hammer/Chipping hammer/welder hammer economic chisels, forged steel structures and shock-absorbing handles

  • 【GREAT CRAFTMANSHIP & QUALITY MATERIAL】Scratch wire brush slag remover is made of high quality steel wire, compact bristles. Welding chipping hammer Carbon steel, heat treatment, high hardness and toughness and is with spring loaded with black. Practical slag removal tool we offer..
  • 【ALL IN ONE PACK】You are going to receive 1 piece of welding hammer and 1 piece of wire brush and this pack comes with protective gloves, please wear this before operation! These tools will surely help a lot for your welding job. Easy to remove and clean corrosion and slag and rust, saving time and energy during your work, very easy to use, long-lasting and quick cleaning.
  • 【SCRATCH WIRE BRUSH】You need a good wire brush！This wire brush is simple operation, durable brush. It is used for polished and polishing and removing slag and welding residue. Concave-convex design, high brush density, less loss of the wire. Made of stainless steel bristles, strong and thick wire, not easy to fall off, featuring super toughness, not easy to deformation, bristles are neat and not easily deformed. It is very durable for a long term use..
  • 【WELDING CHIPPING HAMMER】Professional welding tool! Shockproof tool! Made of carbon steel, heat treatment, high hardness and toughness, it....
Check Stock

Axolotl. Facts & Information: A Complete Pet Owner's Guide. Axolotl care, tanks, habitat, diet, buying, life span, food, cost, breeding, regeneration, health, medical research, fun facts, and more

  • 2 Speed Wind Aquarium Cooling Fan: this fish tank cooler has 2 different wind speeds for you to choose according to your demand, and it can reduce water temperature by 2 to 4 degrees depending on the weather and indoor temperature.
  • This fan can be clipped firmly on the cylinder wall, which is within 1.2 cm in thickness, and will not fall off easily.
  • Adjustable Function: the aquarium tank chiller and the bracket can be adjusted up to 100 degrees, convenient for you to operate and satisfy your multi angle use needs.
  • Also, this aquarium cooler is about 39.5 x 13 x 7.5 cm/ 15.55 x 5.12 x 2.95 inches, appropriate for the tank less than 80 cm/ 31.5 inches in length to use.
  • Safe to Use: the rated voltage of this black water cooler for fish tank is 12V, which is a low voltage that can offer you a safe using experience.
  • And the cooling fan is equipped with a power cable 120 cm/ 47.24 inches long, which is long enough for you to plug in a distant socket.
  • Easy to Install: this fish tank fan is very easy to install, just put it on the cylinder wall of the fish tank, then tighten the screw on one side, so as to prevent the fan falling o....
Check Stock

Welding 10 OZ hammer/Slag/Chipping/welder hammer economic chisel, forged steel structures and shock-absorbing handles. Rock hard. Non rotary. Flat and spike sides.

  • The Welding Hammer: Spring handle welding chisel hammer skimmer. Used for removing slag and welding residue..
  • The Spring Welding Design: Spring handle is designed to absorb the shock of contact while cleaning and shipping way welding debris..
  • The Practical Design: One end is a flat chisel and the other end is a conical chisel to get into tight spots..
  • Spiral barrel spring type handles with springy shock-proof design at the end with hook handle.
  • It can be used to remove metal slag, remove weld slag from welds and weld spatter, and beat hard objects, etc..
Check Stock