Top Cylinder Head Bushing Reviews

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • ...ol Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multi....
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

IAP Performance 043101355CK Complete Dual Port Cylinder Head with Sensor Hole for VW Beetle

  • 【Premium Material】Made from quality steel with black coating, corrosion and rust resistance, sturdy and durable..
  • 【Function】This tool is attached to the cylinder head, used to lift the cylinder head from the engine..
  • 【Application】Suitable for Detroit diesel 60 series engines..
  • 【Easy & Convenient to Use】Remove the cylinder head bolts and install the cylinder head lifter bracket (J–35641–A) using the bolt hole at the inboard center, then attach a suitable lifting hook to the eyelet in the lift bracket, and lifter the cylinder head off the engine..
  • 【100% Satisfaction Guarantee】Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Cylinder Head Lift Bracket, simply return it for a full refund in 30 days..
Check Stock

Motorcycle Cylinder Head Cover Guard CNC Aluminum For Raptor 700 2006-2021 Raptor 700R 2009-2021 ATV Transparent Paragraph

  • Fitment: The Cylinder Head Cover For Raptor 700 2006-2021 Raptor 700R 2009-2021..
  • Material: The Cylinder Head Cover Is Made Of Aluminum Alloy, It Has Good Corrosion Resistance And Is Stronger Than Ordinary Cylinder Head Cover..
  • Process: The Cylinder Head Cover Is CNC Processing, Light And Strong, The Surface Is Anodized, The Appearance Color Is More Gorgeous, Without Losing The Sense Of Fashion..
  • Function: The Cylinder Head Cover Can Play A Good Role In Sealing And dustproofing，And Can Also Protect The Cylinder From The Damage Of Objects Such As Gravel..
  • Replace OEM Part Number: 1S3-11185-10-00..
Check Stock

Kluson Revolution G Style 3x3 Tuning Keys, Plastic Buttons

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Vintage style KEDP-3801C.
  • Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Mophorn Complete Cylinder Head for 85-95 22R 22RE 22RE 2.4L SOHC Pickup 4Runner Speed

  • Perfectly Suited: This cylinder head perfectly fits the 1985-1995 Toyota 4Runner 2.4L SOHC 8v 4Cyl, 1985 Toyota Celica 2.4L SOHC 8v 4Cyl, 1985-1995 Toyota Pickup 2.4L SOHC 8v 4Cyl, Volkswagen 2005-2010 Jetta, 2012-2014 Beetle, 2006-2009 Rabbit..
  • Robust Iron Structure: Built from industrial-grade cast iron, our cylinder head is tolerant to the extreme pressure generated inside cylinders and resistant to high temperatures and abrasion. Give up disappointing cylinders, and we got what you are looking for..
  • Highly Stable ＆ More Efficient: These are nothing like those ordinary cylinder heads that bring you dissatisfaction. Ours features fantastic performance. Add this cylinder head to your engine, and drive at lower noise with a higher power transfer efficiency..
  • Fully assembled ＆ Tested: All our cylinder heads have been fully assembled, carefully packed, and are waiting to get into your hands. Replace your cylinder heads and start to experience the smooth ride you have been missing out on..
  • Widely Used: As a quality cylinder head, this has been used on lots of Toyota 2.4L SOHC 22R 22RE 22REC engines. Replace your old malfunctioning cylinder head with our newly improved one, and you will feel your engine running smoothly like never before..
Check Stock

Kluson Revolution 3X3 Locking Tuners, Keystone Buttons - NICKEL

  • Kluson Revolution 19:1 'Gibson' mount Locking tuners in Nickel with Pearloid Keystone buttons, Vintage style KEDPL-3801N.
  • Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid keystone button and pin-stripes pay tribute to Kluson heritage while adding a rear knob locking.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Tuner - Kluson, Revolution G Mount, Pearloid Button, 3/side, Color: Nickel

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Vintage style KEDP-3801N.
  • Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

15810-RKB-J01 15810RKBJ01 Vtec Solenoid Spool Valve W/Gasket Compatible with Honda Accord Odyssey Pilot

  • [OEM]: 15810-RKB-J01 15810RKBJ01 918-078.
  • [Compatible]: Compatible with Honda Pilot FWD.
  • V6 3.5L (3471cc) Cylinder Head 2008 Honda Accord V6 3.0L (2997cc).
  • ELECTRIC/GAS Cylinder Head 2007 Honda Odyssey V6 3.5L (3471cc).
  • EXL Submodel Cylinder Head 2007 Pilot FWD.
  • V6 3.5L (3471cc) Cylinder Head 2007 Accord V6 3.0L (2997cc).
  • ELECTRIC/GAS Cylinder Head 2006 Odyssey V6 3.5L (3471cc).
  • EXL Submodel Cylinder Head 2006 （More models are below）.
  • [Premium Quality]: Cheap and cheerful, easy to install with related installation video, durable, engineered from high-quality materials to improve reliability and durability.
  • [Installation]: Searching related installation video on the internet will be recommended and always wear eye protection and start with installation tools.
  • [Note]: Our products are stored in warehouses, and there will be collisions during handling or transportation (most products need to be kept lubricated, it is normal to have lubricants, they are not second-hand products). But please rest assured that it will not affect the use. If you have certain requirements for appearance, please contact us and we can exchange your goods. Thank you for your understanding!.
Check Stock

15810-RKB-J01 15810RKBJ01 Vtec Solenoid Spool Valve W/Gasket Compatible with Honda Accord Odyssey Pilot

  • [OEM]: 15810-RKB-J01 15810RKBJ01 918-078.
  • [Compatible]: Compatible with Honda Pilot FWD.
  • V6 3.5L (3471cc) Cylinder Head 2008 Honda Accord V6 3.0L (2997cc).
  • ELECTRIC/GAS Cylinder Head 2007 Honda Odyssey V6 3.5L (3471cc).
  • EXL Submodel Cylinder Head 2007 Pilot FWD.
  • V6 3.5L (3471cc) Cylinder Head 2007 Accord V6 3.0L (2997cc).
  • ELECTRIC/GAS Cylinder Head 2006 Odyssey V6 3.5L (3471cc).
  • EXL Submodel Cylinder Head 2006 ?More models are below?.
  • [Premium Quality]: Cheap and cheerful, easy to install with related installation video, durable, engineered from high-quality materials to improve reliability and durability.
  • [Installation]: Searching related installation video on the internet will be recommended and always wear eye protection and start with installation tools.
  • [Note]: Our products are stored in warehouses, and there will be collisions during handling or transportation (most products need to be kept lubricated, it is normal to have lubricants, they are not second-hand products). But please rest assured that it will not affect the use. If you have certain requirements for appearance, please contact us and we can exchange your goods. Thank you for your understanding!.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

CDHPOWER Super Motor PK80 Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
  • High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
  • The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock