Top Cylinder Can Cooler Reviews

Briggs & Stratton 130G32-0022-F1 Briggs and Stratton 9.5 GT Horizontal Shaft Engine Black

  • Dura-Bore cast iron cylinder sleeve for extended life.
  • Maintenance-free Magnetron electronic ignition for quick, dependable starts.
  • Overhead valve design (OHV) for cooler operation and long valve life.
Check Stock

Makita MAC700 2.0 HP* Big Bore™ Air Compressor

  • Cast iron pump with big bore cylinder and piston, combined with greater bore and stroke, delivers maximum performance.
  • Substantially lower noise levels with a large 1,720 RPM pump, enabling greater displacement at lower RPM.
  • Low amp draw reduces incidences of tripped breakers and voltage drop that can cause premature motor failure.
  • Oil lubricated provides cooler running pump, minimizes wear.
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Cylinder Head Fits Honda Rancher TRX350 (2000-2006)

  • ★【REPLACEMENT FOR】7151 Carbide Buggy||Eton 150||Suzuki Raider 150cc||Z2150R Go Kart||Roketa 150 Buggy||GY6 150cc 157FM Engine||Kymco Agility Taotao Lance Vintage 150||Eaglecraft 150||Znen 150||Tank 150||Retro 150||BMS 150||Baja SC150||Jonway 150||Shenkes||Yerfdog GX150 Spiderbox 150cc||Cooler 3150DX2||Kandi Carbide Quantum Zirconia Helix Manco American Sportwerk 150||Tomerlin Crossfire 150 150R.
  • ★【SIZE】Cylinder Inner Diameter:57.4mm/2.3".
  • Mounting hole distance:54mm/2.1" & 63mm/2.5".
  • ★【EASY TO INSTALL】High quality cylinder replacement part.High toughness,corrosion resistance,rustproof and durable.Has a good heat dissipation structure design,providing reliable performance and long life service..
  • ★【NOTE】Please verify model number and size prior to ordering to ensure this is the correct part.
  • ★【WOOSTAR CUSTOMER SERVICE】Always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
Check Stock

Skunk2 372-05-0275 Thermal Intake Manifold Gasket for Honda D-Series Engine

  • With the use of Skunk2 thermal gaskets, air intake temps are minimized which provides the your engine cooler air for combustion, and that means....
  • This and bypassing several heat sources can provide you up to 5 percent more power.
  • Skunk2 Racing thermal intake manifold gaskets are perfect for your....
  • Protects against heat soak and reduces the incoming air temperature before it reaches the cylinder head.
  • Reduces heat transfer into the intake manifold.
Check Stock

Briggs and Stratton 13R232-0001-F1 Engine

  • Dura-bore cast iron cylinder sleeve for extended life.
  • Maintenance-free Magnetron electronic ignition for quick, dependable starts.
  • Overhead valve design (OHV) for cooler operation and longer valve life.
  • Dual-clean air cleaner pleated paper filter with a foam pre-cleaner ensures maximum protection for extended engine life.
Check Stock

Briggs & Stratton 31R976-0016-G1

  • Dura-bore cast iron cylinder sleeve for extended life.
  • Overhead valve design (OHV) for cooler operation and long valve life.
  • Full pressure Lubrication with oil filter.
Check Stock

Small Block F-ord Intake Manifold - 351W Aluminum Carb Intake Manifold 1500-6500 Satin E42458

  • Our LowRise manifold for 351w engines is the ultimate street performance manifold for this engine.
  • Its long runner dual plane design provides the best of both worlds.
  • It provides good top end power without sacrificing bottom end torque..
  • This manifold has a number of features not found in similar competitive manifolds. It includes a rear water crossover passage which can provide for more balanced cylinder head temperatures and a cooler running engine.
Check Stock

NorthStar Air Compressor Pump - 1-Stage, 2-Cylinder, 13.7 CFM at 90 PSI

  • Full cast iron pump for long service life.
  • V-style cylinder design for superior cooling.
  • Floating-type Swedish steel valves deliver much longer valve life.
  • Operates at slower RPM to run cooler and last longer.
Check Stock

Briggs & Stratton 21R807-0072-G1 Simpson 11.5 HP Intek Engine, Black

  • Dura-Bore cast iron cylinder sleeve for extended life.
  • Float carburetor for consistent easy starting.
  • Dual-Clean air cleaner pleated paper filter with a foam pre-cleaner ensures maximum protection for extended engine life.
  • Overhead valve design (OHV) for cooler operation and longer valve life.
Check Stock

Briggs and Stratton 21R707-0084-G1 10.5 Gross HP Intek Engine Black

  • Dura-Bore cast iron cylinder sleeve for extended life.
  • Overhead valve design (OHV) for cooler operation and long valve life.
  • Maintenance-free Magnetron electronic ignition for quick, dependable starts.
  • Float carburetor for consistent easy starting.
  • Patented linear balancing system provides smoother performance.
Check Stock

The original ICE GENIE Ice Cube Maker! Space Saving Ice Cube Maker, Holds up to 120 Ice Cubes (Ice Genie, Ice Tongs)

  • ???? EASY RELEASE & NO SPILL WITH OUR DOUBLE CHAMBER DESIGN: Our unique double chamber design holds up to 120 ice cubes! Simply fill the outer chamber with water, then lift up the inner cylinder after the water freezes, and easily squeeze the bucket to release the cubes! The flexible silicone material makes it easy to release ice cubes straight into the bucket! There will be no awkward twisting and turning or spilling cubes on your floors with our revolutionary design!.
  • ???? SAVE SPACE IN YOUR FREEZER: The Ice Genie Original Ice Cube Maker, revolutionary design can replace up to 10 traditional ice cube trays in your freezer! Can also fit perfectly inside mini-fridges!.
  • ???? USE AS A DRINK HOLDER: Whether if you’re throwing a party, wine night, or relaxing by the pool, The Ice Genie Original Ice Cube Maker doubles as a portable cooler to keep your beverages last cooler for longer! Use them for your wine and bottled beverages, cocktails, iced coffee, juices, canned drinks, and more!.
  • ???? DISHWASHER SAFE, BPA FREE, & ODOR FREE: The Ice Genie Original Ice Cube Maker is made of high quality, flexible food-grade silicone, BPA FREE. Our ice cube maker is also incredibly durable so you can put them into your dishwasher directly for an easy clean....
Check Stock

NorthStar Air Compressor Pump - 2-Stage, 2-Cylinder, 24.4 CFM at 90 PSI, 175 Max. PSI

  • Full cast iron pump for long service life.
  • V-style cylinder design for superior cooling.
  • Floating-type Swedish steel valves deliver much longer valve life.
  • Operates at slower RPM to run cooler and last longer.
Check Stock