Top Cyclone Dust Collector For Home Shop Reviews

Cyclone Dust Collector 2.0” DIY Dust Separator Extractor with 2 Filters, Shop Dust Collector Accessories Cyclone Vacuum Cleaner Filter, for Woodworking, Ash, Metal Shavings, Grain etc

  • DIAMETER 2.0”: 2″ OD inlet (connects to your tools) and 2″ OD outlet (connects to your collector). If the size of the hose is too small, you can heat the hose and then put it on the diameter of the dust collector. The diameter of the air inlet and outlet of our dust collector is 2.0”, if you are 1.25”, 1.5”, 2.5” or other caliber vacuum cleaners, you can buy a caliber converter yourself. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving..
  • FILTER : No. 1 filter element: Through Hole (For woodworking sawdust, dust, etc.), filter element with large holes at the bottom, No. 2 filter element: Blind Hole (Only for ash), filter element without large holes (need to be equipped with a motor above 1200W). Only applicable to ash, such as: stove ash, grass ash and other burning residues (To avoid blockage, remember not to use it in other scenarios)..
  • SUITABLE for STURDY BUCKET: Because our product has a good seal, we hope you can notice that when the vacuum cleaner is sealed with the bucket, the suction will be very strong, thinner barrels are relatively difficult to withstand strong suction, so it is more prone to the deformation of the bucket. In this case, it is only necessary to replace the bucket with a strong....
Check Stock

Oneida Air Systems Super Dust Deputy (4/5 DIY)

  • LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter and reducing the need for cleanings..
  • HIGH EFFICIENCY - Integrated air ramp and neutral-vane inlet provide ultra-high efficiency..
  • SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. 4/5 Cyclone with included adapters offers 4 or 5" OD inlet (connects to your tools) and 4 or 6" OD outlet (connects to your collector). Approximately 23" height..
  • EASY INSTALLATION - Compatible with almost any dust collector, the lightweight and compact design makes for fast and simple installations. Ready out of the box to connect to your dust collector with either a 4” or 6” hose, and to your tools with either a 4” or 5” hose. Includes cyclone, 2x reducer adapters, assembly gasket and hardware..
Check Stock

DCT Cyclone Wood Saw Dust Collection Garbage Trash Can Lid – Woodshop Dust Separator Lid for Woodworking Collector Tools

  • ENHANCED DUST COLLECTOR EFFICIENCY: Use the DCT Cyclone Wood Saw Dust Collection Garbage Can Lid – Woodshop Dust Separator Lid for Woodworking....
  • USE YOUR TOOLS: Fits most 30-gallon metal trash cans for best seal.
  • Can outside diameter must be between 19 inches (48.3cm) and 20.75 inches (52.7cm).
  • VARIOUS APPLICATIONS: Create a vacuum system and use to build a dust separator for your woodworking power tools by placing in front of your dust....
  • BUILT TO LAST: Constructed from rugged ABS plastic for reliable strength and longevity.
  • Features a foam gasket for a superior seal.
  • EASY TO USE: Place the included curved elbow fitting on the input intake side (to the Jointer) of the cyclone can and your dust collector on the....
Check Stock

Heroines

  • ...nction: The 2.0 HP, 9.8 Amp low noise motor creates a powerful 1059 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: The cyclone system of this woodworking dust collector allows larger wood chips to fall and be caught in the collection drum, while finer wood particles are circulated into the filter. This achieves a better purification effect..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 3-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
Check Stock

Supercell High-Pressure Dust Collector (30-Gallon)

  • 10X HIGHER SUCTION POWER than standard dust collectors and the only dust collection system on the market with high enough levels of static pressure (WC) and airflow (CFM) to effectively capture and contain dust from every tool in the shop with a dust port size of 1” to 5”. BEST DUST COLLECTOR – Popular Mechanics 2020 Tool Awards.
  • UNIVERSAL COLLECTION – Combined 5HP fan blower motors easily accommodate the widest range of tools, including handheld sanders, table saws, and miter saws to jointers, planers, and even CNC routers with up to an astounding 100’ of 4” hose or ductwork..
  • HEPA FILTRATION - Premium HEPA-Grade Filter Media with non-stick, PTFE membrane. Internal pulse filter cleaner removes clogs in seconds without needing to take apart the system for cleaning. Plus, high-efficiency cyclone separator removes 99% of the dust before it even reaches the filter..
  • FLEXIBLE USE – Available as a wall-mounted system with either a 14-, 30-, or 55-gallon collection bin, or as a mobile unit with a 14-gallon bin..
  • INNOVATIVE FEATURES include wireless remote, pulse filter cleaner, dust bin with liner bag holder and fill level viewing window, Dust Sentry bin level sensor, and more – all in a compact footprint and profile. Patent Pending..
Check Stock

Oneida Air Systems Supercell High-Pressure HEPA-GFM Dust Collector 55-Gallon

  • 10X HIGHER SUCTION POWER than standard dust collectors and the only dust collection system on the market with high enough levels of static pressure (WC) and airflow (CFM) to effectively capture and contain dust from every tool in the shop with a dust port size of 1” to 5”. BEST DUST COLLECTOR – Popular Mechanics 2020 Tool Awards.
  • UNIVERSAL COLLECTION – Combined 5HP fan blower motors easily accommodate the widest range of tools, including handheld sanders, table saws, and miter saws to jointers, planers, and even CNC routers with up to an astounding 100’ of 4” hose or ductwork..
  • HEPA FILTRATION - Premium HEPA-GFM (Grade Filter Media) with non-stick, PTFE membrane. Internal pulse filter cleaner removes clogs in seconds without needing to take apart the system for cleaning. Plus, high-efficiency cyclone separator removes 99% of the dust before it even reaches the filter..
  • FLEXIBLE USE – Available as a wall-mounted system with either a 14-, 30-, or 55-gallon collection bin, or as a mobile unit with a 14-gallon bin..
  • INNOVATIVE FEATURES include wireless remote, pulse filter cleaner, dust bin with liner bag holder and fill level viewing window, Dust Sentry bin level sensor, and more – all in a compact footprint and profile..
Check Stock

Dust Deputy Anti-Static Cyclone Separator DD DIY Plus

  • INCREASED SUCTION POWER - The ORIGINAL shop vacuum cyclone, now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air....
  • LONGER LIFESPAN - Prevents fine dust and large debris from reaching your shop vacuum's filter, reducing the need for cleanings and prolonging the....
  • WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2.0" ports....
  • MADE IN AMERICA – Designed, patented, & manufactured in the USA, our Dust Deputy DIY (Do-It-Yourself) Plus cyclone lets you build the dust control....
Check Stock

Dust Deputy 2.5 DIY Anti-Static Retrofit Cyclone Separator for Wet/Dry Shop Vacuums (DD 2.5 DIY)

  • NEW 2.5 MODEL – the LATEST AND GREATEST EDITION - delivers up to 2x the airflow of smaller cyclones and lid-style separators. Optimized for use with today’s larger wet/dry vacs with 2.5” hose cuffs and fittings. Has the same base as the original, for easy upgrades..
  • INCREASED SUCTION POWER - The original and still the best! Now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy 2.5 cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!.
  • LONGER LIFESPAN - Prevents fine dust and large debris from reaching your shop vacuum's filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy 2.5 will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand..
  • MADE IN AMERICA – Our Dust Deputy 2.5 DIY (Do-It-Yourself) cyclone lets you build the dust control system that works best for you. DIY product contains the cyclone separator, gasket, and mounti....
Check Stock

VEVOR 2 HP Dust Collector, Portable Cyclone Dust Collector, 1,500 CFM Woodworking Dust Collector with 13.2-Gallon Collection Drum and Mobile Base, 220V Dust Collection System 3-Micron Canister Kit

  • Excellent Suction Function: The 2.0 HP, 9.8 Amp low noise motor creates a powerful 1059 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: The cyclone system of this woodworking dust collector allows larger wood chips to fall and be caught in the collection drum, while finer wood particles are circulated into the filter. This achieves a better purification effect..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 3-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
  • Wide Application: The cyclone dust collector is widely used in industries, such as machinery, textile, household appliances, food, coal, building mate....
Check Stock

VEVOR 1.5 HP Dust Collector, 647 CFM Portable Vortex Dust Collector, Woodworking Dust Collector with 13.2-Gallon Collection Bag and Mobile Base, 220V Dust Collection System 25-Micron Canister Kit

  • Excellent Suction Function: The 1.5 HP, 7.1 Amp low noise motor creates a powerful 647 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: Vortex cone technology of the cyclone dust collector improves chip separation and packing efficiency. The two-bag system drops the heavy chips into the lower bag, then sends the dirty air through the top bag (filter), giving cleaner air back..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 25-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
  • Wide Application: The cyclone dust collector is widely used in industries, such as machinery, textile, household appliances, food, coal....
Check Stock

Oneida Air Systems Dust Deputy Anti-Static Cyclone Separator (DD Bagger)

  • INCREASED SUCTION POWER - Now 20% more efficient with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!.
  • LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Bagger will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!.
  • INNOVATIVE BAGGER SYSTEM - Wall-mounted Bagger kit offers high waste capacity, visible fill level, and easy disposal..
  • WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports that fit the cuffed 2.5” hoses that come standard with most shop vacuums. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavin....
Check Stock

How To Design & Build Centrifugal Fans For the Home Shop

  • INCLUDES: (1) Dust collection reducer (8) 3ft collection pipes (5) blast gates (4) Y-fittings, (3) 45 degree elbows (2) 90 degree elbows (22) pipe couplings (10) clamps & additional mounting hardware.
  • FUNCTION: Gives you everything you need to expand and upgrade your existing dust collector systems for woodworking.
  • VISIBILITY: Premium clear plastic tubing lets you clean with clarity, spotting and clearing blockages (sawdust collection, chips, etc) quickly at any stage within your network.
  • COMPATIBLE: Works with most shop vacs, central home vacuums, and/ or centralized dust extraction systems.
  • MULTI-USE: This dust collector accessories kit contains components suitable to support up to five dust collection machines.
Check Stock

Abbott & Costello: The Complete Universal Pictures Collection [Blu-ray]

  • INCLUDES: (1) Dust collection reducer (8) 3ft collection pipes (5) blast gates (4) Y-fittings, (3) 45 degree elbows (2) 90 degree elbows (22) pipe couplings (10) clamps & additional mounting hardware.
  • FUNCTION: Gives you everything you need to expand and upgrade your existing dust collector systems for woodworking.
  • VISIBILITY: Premium clear plastic tubing lets you clean with clarity, spotting and clearing blockages (sawdust collection, chips, etc) quickly at any stage within your network.
  • COMPATIBLE: Works with most shop vacs, central home vacuums, and/ or centralized dust extraction systems.
  • MULTI-USE: This dust collector accessories kit contains components suitable to support up to five dust collection machines.
Check Stock