Top Cutting Taps Reviews

BOSCH BPT12M125 12mm - 1.25 High-Carbon Steel Metric Plug Tap

Metric plug taps – engineered for cutting right-hand internal metric threads, these taps are ideal for cutting internal threads in import cars, motorcycles and machinery.
Heat-treated carbon steel – provides superior durability and speed.
Rolled threads – deliver more accuracy and are cleaner than machined threads.
Package dimensions:0.437"L x 1.5"W x 5.875"H.

Check Stock

DEWALT Drill Tap, UNC, 3/8-Inch (DWADT3816)

★ 【HIGH QUALITY】 These valves are made of high speed steel and present a finish of surface by nitriding for a duration and a resistance is elevated to the rust for a prolonged service life..
★ 【DIFFERENT SIZES】 There are total of 6 pieces of taps in different sizes from M3 to M10 which you can use to tap various files.
★ 【SPECIAL DESIGN】 The taps are designed with spiral splines and the chip reteying process would be better.
★ 【FUNCTION】 These are taps with drilling function, used to drill hole and cut new threads at the same time, you will get smooth tapping experience with them.
★ 【WIDE APPLICATION】 These taps are used on a machine to perform tapping, usually more precise because human error is eliminated. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on..

Check Stock

XtremeAmazing Set of 5 HSS NPT Pipe Tap Set 1/8, 1/4, 3/8, 1/2 and 3/4 Inch

Taps Size: 1/8''-27 NPT, 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT.
High quality HSS material, cutting edges clean and sharp..
With a center hole drilled in all taps, easy to use in a drill press..
Package Contents: 5 x NPT Pipe Tap SetHigh quality HSS material, cutting edges clean and sharp..

Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
Each compartment is labeled with sizing for simple identification.
PACKAGE CONTENTS: Combination set contains both metric taps and dies.
Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
(Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).

Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

...erdo tap and die set is one of those toolboxes that are not immediately intuitive to have but become essential to your work once you have it. It does not matter if you are a mechanic, a craftsman, a metal or woodworker, or even a DIY enthusiast, a tap and die set would be remarkably useful to you. Taps and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into..
A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..

Check Stock

RIDGID 44923 Model 690-I Hand-Held Power Drive Kit, Pipe Threading Machine and 1/2-Inch to 2-Inch 11-R NPT Pipe Threading Die Heads with Carrying Case for Threading Pipe

CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
Can cut materials such as cast iron, steel, aluminum, copper.
EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....

Check Stock

HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
Right-hand cutting tool has a clockwise cutting function..
NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..

Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
Each compartment is labeled with sizing for simple identification.
PACKAGE CONTENTS: Combination set contains both metric taps and dies.
Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
(Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).

Check Stock

SharCreatives 60 Piece Metric & SAE Threading Tap & Die Tool Set Coarse and Fine Threads for Threading and Re-threading with Accessories and Storage Case

✔PROFESSIONAL HEAVY DUTY COMPREHENSIVE SET ideal for rethreading fasteners and fastener holes, cutting or renewal internal or external threads . Precision milled SAE and METRIC tap and die set for cutting raw material or repair existing threads, remove screws and more..
✔SUPERIOR QUALITY made of hardened Alloy Steel suitable for lifelong durability, and superior strength. Suitable for cutting in steel, copper, aluminum, cast iron and etc.
✔WIDE RANGE USE - Set includes complete and MOST POPULAR SIZES (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
✔WELL ORGANIZED IN THE CARRYING CASE - Heavy-duty plastic carrying case for easy transportation, safe storage, and quick organization preventing from accessories to fall apart..
✔ PROFESSIONAL AND PERSONAL USE this tap and die kit is ideal for DIY projects at home, auto and machinery workshop and many more..

Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.

Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

60-Pc Master Tap and Die Set - Include SAE Inch Size #4 to 1/2” and Metric Size M3 to M12 Coarse and Fine Threads | Essential Threading Rethreading Tool Kit with Complete Accessories and Storage Case

▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.

Check Stock