Top Cutting Coolant Reviews

Makita HB350 1-3/8" Magnetic Drill

Cuts holes in steel up to 1-3/8" diameter and 2" thick.
10 AMP motor delivers 850 RPM for enhanced cutting speed.
ideal for working in constrained or elevated spaces.
Removable guard isolates the cutting mechanism while rotating.
Spindle coolant system with removable reservoir for improved cutting performance.

Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
Uniform synthetic diamond grit bonded over a durable steel platform.
Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
Recommended cutting speed is from 150 to 300-RPM.

Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
Uniform synthetic diamond grit bonded over a durable steel platform.
Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
Recommended cutting speed is from 150 to 300-RPM.

DURABILITY: Blade drive reduction gearbox operates in an oil bath..
FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..

The cooling effect is no less than the conventional water-cooled when the Processing the coolant can be more much more efficient.
Gas processing chips are blown away, working will be safer.
The nebulizer gas and coolant can be adjusted, easy to use on different processing conditions..
Not only increases the machining cutting speed, save time, but also reduce processing costs and tool wear..

Fusion Cool 2240 is a top cutting oil for drilling metal. This cutting fluid product is perfect for machining of many kinds of metals. Works well for grinding, milling, CNC machining, tapping, turning..
Works well for bandsaw cutting, drilling, tap and die, drill bit cutting, worm drive saw, and many more cutting applications..
Superior sump life with ultra-low odor and mist. Direct Cross-Over / Replacement for Trim SC 520.
Environmental friendly, recyclable coolant.

These Saw Blades are rated for cutting wood materials like boards or MDF and metals such as square tube, angle iron, mild steel plate, pipe, tube, and other non-ferrous metals..
The cutting blades are not limited to the these materials, but perform at their peak when cutting them specifically..
Cuts wood, wood with nails, mild steel, brass, copper, plastics and other materials without heat, burrs or coolant..

For drilling, milling, grinding, polishing, brushing, cutting and engraving, for working steel, precious metals, glass, ceramics, plastics, etc..
Ideal for electronic hobbyists, model-builders, mechanics, jewellers, opticians, artists, chiropodists, dental technicians, etc..
Quick-action chuck and electronic speed control, with feedback effect (high torque at low rpm's).
With low safety voltage. Therefore, also suitable for working with coolant (wet grinding and cutting).
Scope of delivery: 1x PROXXON Rotary Tool MICROMOT 60/EF including quick-action chuck. Part number: 28512.

No coolant required and produces virtually no sparks.
Cuts Wood, Ferrous Metal, Non-Ferrous Metal & Plastic.
Not Recommended: Hardened high carbon, coated and stainless steel. Note: Cutting galvanised steel may reduce blade life.

WORKS WITH YOUR ENGINE HOT OR COLD: Disc-type tester is accurate at all temperatures.
Tests your coolant’s freezing point and helps guard against coolant overprotection.
EASY TO READ: Count the number of floating disks in the coolant tester and compare it to the chart on the body of the tester, which shows coolant freezing temperature in both Celsius and Fahrenheit.
Five floating discs means ideal protection.
PREVENTS OVERPROTECTION: Includes a special 6th disc which shows overprotection and a loss of coolant efficiency due to a bad water-coolant mix.
Our antifreeze and coolant tester has you covered.
SIMPLE AND POWERFUL: Features a clear body that makes it easy to check your coolant for impurities, such as rust.
All-in-one coolant tester kit features a simple yet powerful design.
WORKS ON ANY VEHICLE: Test diesel antifreeze, RV antifreeze, camper antifreeze, marine antifreeze, just about any vehicle's antifreeze coolant with ease with our coolant tester.

General purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges..
The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance to the bar size allows to cool the cutting edge and remove chips..
The inserts is set with a 0° rake angle and an inclination angle shown in the table below..
Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002"..
Extreme gloss finish, Bar hardness approximately 45HRC.