Top Cutting Center Saw Reviews

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • Professional high speed steel M42 (not M3) with cobalt 8% cutting teeth hardened to control the efficient and durable and reliable use on workpieces like sheet metal, Aluminium, wood, plastic, plasterboard, etc.. HSS M42 teeth is particularly good for high strength metal such as stainless steel (HSS M3 ones are good for middle strength metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill ....
Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

  • 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
  • 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
  • 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
  • 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
  • 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check Stock

BLACK+DECKER 20V Max Pole Saw, 8-Inch, Cordless (LPP120)

  • BLACK+DECKER electric lawn and garden equipment including electric pole saw releases zero emissions in your yard, helping to reduce your carbon footprint..
  • 20V Max Lithium Ion battery of the electric pole saw has a long lifespan and retains its charge 5 times more than similar NICD batteries while idle..
  • 20V Max Lithium Ion battery of the tree trimmer pole saw provides up to 100 cuts of 1 1/2-inch pine branches per charge..
  • 8-inch cutting bar and chain allows for a maximum cutting diameter of 6 inch.
  • Center extension allows for a useable Length of 6.5 feet or 10 feet and provides overhead reach of up to 14 feet..
  • In-line power-head allows easy maneuverability and visibility between branches.
  • Unit disassembles for easy storage and transport.
  • Part of the 20V Max System: A System that demands attention.
Check Stock

Tysun 5 Pcs 4.5 inch Diamond Saw Blade Tile Blades Cutting Disc Wheel for Cutting Porcelain Tiles Granite Marble Ceramics

  • ★【High Quality】Super thin and unique X-style teeth for high performance, offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling..
  • ★【Size】Outer Diameter: 115mm (4.5 inch). Core: 22MM(Come with 20MM Ring). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" and 4/5" Arbor..
  • ★【Compatible with】It can be used on different types of angle grinders and tile cutters for Wet and Dry cutting..
  • ★【Wide Applications】Universal for dry or wet cutting. Tysun diamond saw blade is engineered for extremely smooth cutting of porcelain, granite, marble, ceramic tile, etc..
  • ★【Package Includes】5 Pcs 4.5 inch Tile Cutter Diamond Saw Blades..
Check Stock

FEWELL 12in Tile Saw Blade Dry Wet Cutting 10mm Segment Height Porcelain Diamond Tile Blade 12 Inch Ceramic Tile Cutter Blade Disc Wheel

  • ★Efficient: Unique turbo mesh rim blade and X teeth provide fast, precise, smooth cutting..
  • ★Ultra-thin: For fast cutting and low waste. These ultra-thin Reinforced turbo blades are our fastest cutting discs for hard materials..
  • ★High Performances: Thicker center to avoid vibrations and wobbling. Stiffening flange in centre ensures straight cuts..
  • ★Durable: High Performance diamond matrix provides long life and enhanced material removal..
  • ★Applications: FEWELL diamond saw blade is engineered for extremely smooth cutting of Porcelain ,tile,ceramic . Can be used dry or wet, fits most tile saws and hand-held angle grinders.It is the ideal diamond saw blade for tile installer homemade DIY..
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

JINGLING 175mm 7' inch Diamond Hole Saw Coated Tile Drill Bits for Glass Stone

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 100mm 4\ inch Tile Diamond Hole Saw Drill Bits for Glass Stone Ceramic

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

Locisne Hole Saw Set 11 Pieces 3/4" - 2-1/2 " Hole Saw Kit with Hex Key and Mandrels for Wood, PVC Board, Plastic Plate Drilling

  • High quality material: Hole Saw Set are made of high strength carbon steel, and nickel-plated with a diamond dust coating offers superior performance and cutting strength, sturdy and durable, for long-term application..
  • 8 different sizes: Includes the following diameters, 3/4" - 19mm, 7/8"- 22mm, 1 1/8"-29mm, 1 1/4"- 32mm, 1 1/2"-38mm, 1 1/3"- 44mm, 2"- 51mm, 2 1/2"- 64mm. Covers most popular hole saw sizes on the market, Different sizes meet your different needs, cutting depth 25 mm. Includes Hex Key and 2 center drill, make the corresponding operation is convenient..
  • Outstanding performance: The special gear design makes the hole more accurate, and high speed steel teeth for fast and clean cuts. High precision, smooth cutting edges, especially impact resistance, wear resistance! Suitable for normal wood, thin PVC board, plastic..
  • Well organized: It has been well organized in a convenient plastic storage case helping you easy carry out for work. After use, easy to store together for the next time you use..
Check Stock

3pcs 4.5 Inch Diamond Saw Blade Tile Blade, SUNJOYCO Diamond Cutting Wheel for Angle Grinder, Dry Wet Smooth Cutting for Porcelain Tile Concrete Granite Ceramic Masonry, 4/5\-7/8\ Arbor

  • ...meter: 4-1/2inch (115mm). Arbor: 7/8 inch and reducing ring 4/5 Inch. Thickness: 1.2mm ( 1/2 inch). Increase Segement:10mm (2/5 inch). Fit for most tile saws and hand-held angle grinders with a 7/8 inch to 4/5 Inch arbor..
  • UPGRADE DESIGN: This diamond saw blade is super thin and provides a precise, smooth, chip-free cutting experience for you. The X-teeth rim of the tile cutting tools can speed up the cutting speed. Thicker center to avoid vibrations and wobbling. 8 Cooling holes ensure longer service life. It can be dry-cut or wet-cut, and the cutting effect is better with water..
  • WIDE APPLICATIONS: This super thin tile blade is designed for cutting ceramic, porcelain tile, granite, marble, and vitrified tile, brick, sandstone. It can work as a porcelain tile blade, ceramic tile cutter, granite blade, and other thin masonry blades. It's an ideal diamond saw blade for tile installers, contractors, homemade DIYers, and tradesmen..
  • HIGH QUALITY: This diamond blade for tile is well made and has brilliant safety and durability. High-quality diamond material makes sure it lasts longer and causes less heat and very little wear when cutting. it also meets the demands of dry and wet cutting..
  • SATISFACTION GUARANTEE: We provide a two-year warranty for the 3pcs di....
Check Stock

Dremel MM720 Multi-Flex Contour Oscillating Tool Cutting Accessory , Black

  • The Dremel Multi-Flex is the first oscillating tool accessory designed for detailed cutting.
  • Innovative design with widest cutting capability of all Dremel oscillating accessories.
  • Make fine, detailed cuts in wood and plastic using your Dremel oscillating tool.
  • Kit includes (4) Spiral Cutting Blades, (3) Saw Cutting Blades, (1) Carbide sanding blade.
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
Check Stock

JINGLING 63mm 2-1/2\ inch Diamond Drill Bit Tile Hole Saw for Glass Ceramic Stone

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

BOW Products GuidePRO GP5 Bandsaw Guide - EVA Feathers the Reduce Kickback - Vertical Resaw Featherboard for Band Saw - Woodworking Safety Accessory for Greater Feed Control

  • PROFESSIONAL WOODWORKING EQUIPMENT: Vertical featherboard universally improves cutting results by holding down materials to ensure productivity on a table saw or bandsaw..
  • REVERSIBLE MAGNET TOOL: Reversible magnet for functionality on either side of the workpiece..
  • EXCELLENT GRIP: Vertical Featherboard anchors to table saws for fences to provide downward pressure as it is cut to ensure that thin material does not bend or lift off the table.
  • compressible gaskets provide excellent grip when magnets are engaged..
  • CLAMP CONFIGURATION: Configured to clamp to the center of a steel table saw fence or at any point on the steel tabletop..
Check Stock