Top Current Sensing Transformer Reviews

DUNSI SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

  • 【HIGH QUALITY】DUNSI premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
  • 【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
  • The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
  • 【OPTIMAL PERFORMANCE】DUNSI premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • 【OPTIMAL RELIABILITY】DUNSI SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%~120% rated input current)..
  • 【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

Transformateurs

  • 4000 Watt Step Up/ Down Voltage Transformer- This step up transformer and step down transformer can be used for all electronics, household appliances....
  • Voltage Transformer - This power transformer can be used in 110 Volt countries and 220 Volt countries. It will convert from 110 Volts to 220 Volts &....
  • Fuse Protected Power Transformer - CE Certified. Full Range Fuse Protection, Full Range Over Current Protection. Fuse will cut off the current if the....
  • Built-in large-caliber heat dissipation, stable output, good heat dissipation performance, safety protection, and more stable operation. note: Make....
  • Best Service: Dual circuit breakers protective for each voltage that is safe operation. If you have any problem, please feel free to contact us, we....
Check Stock

Antrader KSD301 Thermostat, N.C. Temperature Control Switch Thermostat Thermo Switch for Microwave 10A, 10-Pack

  • Advantage: Contact sensor, speed dynamic type, sensitive, reliable, stable action temperature, long service life, no arc phenomenon.
  • Normally Closed: The original state of temperature control switch contact is closed, and open when the temperature sensing exceeds the rated temperature..
  • Features : temperature controller has the characteristics of small size, quick action, accurate temperature control, large current control and long service life.
  • Wide used in home appliance's motor and electrical equipment, such as air Conditioner motor, transformer, thermal appliances, etc.
Check Stock

DAOKI 5 pcs 5A Current Transformer ZMCT103C AC Sensor Single Phase Current Transformer Module Current Sensor AC Active Output Onboard Precision with Dupont Line for Arduino

  • 【Features】:5A range single-phase AC mutual inductance module The inductance module is equipped with ZMCT103C series high-precision current transformers and high-precision sampling resistors to facilitate the collection of AC current within 5A.
  • 【Convenience】:Sampling resistance of AC current transformer onload sampling resistance to facilitate the signal collection of AC current..
  • 【Analog current output】:the module can measure the AC current within 5A, and corredsponding output is 5A/5mA.
  • 【Small size】:Current transformer of AC current mutual module with precise miniature current transformer.
  • 【Original】:Our electronic components are 100% original manufacturing, please rest assured to buy our products.
Check Stock

Dixell XR04CX-5N0C1 230V/50-60Hz Digital Thermostat Controller Defrost Relay Programmable-Commercial for Refrigerating Unit

  • Advantage: Contact sensor, speed dynamic type, sensitive, reliable, stable action temperature, long service life, no arc phenomenon.
  • Normally Closed: The original state of temperature control switch contact is closed, and open when the temperature sensing exceeds the rated temperature..
  • Features : KSD9700 temperature controller has the characteristics of small size, quick action, accurate temperature control, large current control and long service life.
  • Wide used in home appliance's motor and electrical equipment, such as air Conditioner motor, transformer, thermal appliances, etc.
Check Stock

DEWENWILS 300W Multi-Tap Low Voltage Transformer, 120V AC to 12V/13V/14V/15V AC,Stainlees Steel Shield, Outdoor Transformer for Low Voltage Landscape Lighting, Spotlight, Pathway Light, ETL Listed

  • 【Multi-tap Output】300W, convert 120V AC household voltage to 12V/13V/14V/15V safety voltage, providing a safer and more practical electrical current level. Multi-tap output design, enables you to add/subtract new circuits for conencting with your lighting around house..
  • 【Durable & Waterproof】Heavy duty stainless steel, protects the transformer against all severe weather conditions. Durable shield with locking latch, tightly locked to prevent water from entering, withstands years of use..
  • 【Easy to Install】Remove the knockout or the black lid at the bottom to thread your wire out for use. Built-in hanging hole, 6ft SJTW 18AWG power cord, mount it on indoor/outdoor walls directly..
  • 【Work with Timer & Sensor】Timer & photocell port available, enable you to add your photocell sensor(Not Included) and timer(Sold Seperately) for sensing and timing functions. You can also connect the transformer in your smart plug for use..
  • 【Automatic Circuit Breaker】Built-in automatic circuit breaker, it will provide overload and short circuit protection effectively. The total power of the landscape lighting should not exceed 80% of the power pack’s capacity..
Check Stock

DEWENWILS 200W Multi-Tap Low Voltage Transformer, 120V AC to 12V/13V/14V/15V AC,Stainlees Steel Shield, Outdoor Transformer for Low Voltage Landscape Lighting, Spotlight, Pathway Light, ETL Listed

  • 【Multi-tap Output】 200W, convert 120V AC household voltage to 12V/13V/14V/15V safety voltage, providing a safer and more practical electrical current level. Multi-tap output design, enables you to add/subtract new circuits for conencting with your lighting around house..
  • 【Durable & Waterproof】Heavy duty stainless steel, protects the transformer against all severe weather conditions. Durable shield with locking latch, tightly locked to prevent water from entering, withstands years of use..
  • 【Easy to Install】Remove the knockout or the black lid at the bottom to thread your wire out for use. Built-in hanging hole, 6ft SJTW 18AWG power cord, mount it on indoor/outdoor walls directly..
  • 【Work with Timer & Sensor】Timer & photocell port available, enable you to add your photocell sensor(Not Included) and timer(Sold Seperately) for sensing and timing functions. You can also connect the transformer in your smart plug for use..
  • 【Automatic Circuit Breaker】Built-in automatic circuit breaker, it will provide overload and short circuit protection effectively. The total power of the landscape lighting should not exceed 80% of the power pack’s capacity..
Check Stock

Suraielec 200W Low Voltage Transformer with Photocell Sensor and Timer, 120V AC to 12V/15V AC Multi Tap, Outdoor Weatherproof for Landscape Lighting, Individually Controlled Outputs, Weatherproof

  • 【Photocell Sensor & Countdown Timer】Landscape transformer with dusk to dawn sensor automatically turns low voltage pathway lights on at sunset, and off when sunrise. With countdown timer setting, you can illuminate spotlights and deck lighting auto on at dusk , then off at 4, 6, 10 hours interval as needed. Convenient and energy efficient for daily use..
  • 【2 Zones for Independent Control】Suraielec outdoor light transformer is equipped with two independently controlled outputs, allowing to setup 2 different landscape systems all controlled with a single transformer. That’s, you can set your front yard lighting stay lit till dawn while the backyard lights is set to be off 6 hours after sunset. Control home lighting separately..
  • 【Easy to Program & Install】Easy to operate with a push of button, the outdoor low voltage transformer is designed with 3 lighting modes: manual on/off- auto on/off- on at sunset and off 4/6/10 hours later, choose any preferred mode by Zone button. Two mounting holes for hanging the transformer more steadily, compact enough for easy concealment after installation..
  • 【Memory Function & Works with Smart Plug】 The low voltage transformer retains pre-set mode memory after power outage, no need resetting. By switching it ....
Check Stock

Suraielec 120W Low Voltage Transformer with Photocell Sensor and Timer, 120V AC to 12V/15V AC, Landscape Lighting Transformer with 2 Independant Zones,Weatherproof for Pathway Lights, Step Light

  • 【Photocell Sensor & Countdown Timer】Landscape transformer with dusk to dawn sensor automatically turns low voltage pathway lights on at sunset, and off when sunrise. With countdown timer setting, you can illuminate spotlights and deck lighting auto on at dusk , then off at 4, 6, 10 hours interval as needed. Convenient and energy efficient for daily use..
  • 【2 Zones for Independent Control】Suraielec outdoor light transformer is equipped with two independently controlled outputs, allowing to setup 2 different landscape systems all controlled with a single transformer. That’s, you can set your front yard lighting stay lit till dawn while the backyard lights is set to be off 6 hours after sunset. Control home lighting separately..
  • 【Easy to Program & Memory Function】Easy to operate with a push of button, the outdoor low voltage transformer is designed with 3 lighting modes: manual on/off- auto on/off- on at sunset and off 4/6/10 hours later, choose any preferred mode by Zone button. Features memory function, transformer retains its last mode setting after power outage..
  • 【Multi-Tap Outputs & Overload Protection】120W landscaping transformer converts 120 volt current to a low voltage current ( Selectable 12V AC /15V AC), achieving a safe an....
Check Stock

4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer

  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

Mini Mounted Point Set, 50 pcs.

  • The transformer has over current, over voltage, over heat protection.
  • With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
  • Wide application range and flexible to operate.
  • The handheld machine has seven standard grinding tools which is varied.
  • Suitable for processing wood, engineering plastics and soft metals.
Check Stock

ACEIRMC 8pcs HX711 Weighing Sensor Dual-Channel 24 Bit Precision A/D Module Pressure Sensor for Arduino Raspberry Pi Microcontroller

  • Analog Current Meter Module. Transformer can only sense AC.
  • This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals..
  • 3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value..
  • You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output..
  • On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board.
Check Stock

AC Current Sensor Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter Used for Energy Meter in Special,Current Sensors

  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock