Top Current Input Reviews

USB Buck Boost Converter with CNC Shell DROK DC 6V - 30V Step Up Down to 0 - 36V Power Supply 6V 12V 24V 36V Voltage Regulator Fast Charging Module for Mobile Phone LCD Digital Display

Parameter --- Input Voltage: DC 6.00-30.00V.
Dipslay --- 1.44 Inch Digital Colorful LCD HD Screen, Clear & Convenient..
Detectable Internal/External Temperature.
Protection --- Input Anti Reverse-Connect Protection, Output Short Circuit Protection, Over Voltage Protection (OVP), Over Current Protection (OCP),....
Custom CNC Shell --- Type-C Input and USB-A Output.

Check Stock

ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module

Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....

Check Stock

Dometic CF-025DC Portable Freezer/Refrigerator Slim/Tall, Gray

Slim and Tall this model fits into narrow spaces.
23 Liter capacity holds 27, 12 ounce cans.
Strong injection molded cabinet, Deep freeze functionality.
Two-Stage battery monitor and Upright storage of 2-liter bottles.
Input voltage (AC) 100-240 V ,Input frequency 50/60 Hz ,Rated input current (AC) 1.3-07A AC100-240V A ,Rated input current (DC) 7A DC12V/3A DC24V A ,Input voltage (DC) 12/24 V.

Check Stock

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC....
Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp.....
Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug..
Packing list: 1x Terminal block distribution module. 1x Red banana plug. 1x Black banana plug. 11x Red spade terminal connectors (support wire 0.5 to....

Check Stock

Aideepen 1200W 20A DC Converter Boost Car Step-up Power Supply Module Adjustable Voltage Converter 8-60V to 12-83V

【Features】Input overcurrent protection.
【DIY projects】It adopts 7 electrolytic capacitors and a 33MM high-power iron-silicon-aluminum magnetic ring to prevent over-temperature magnetic saturation under high current conditions. Use a piece of aluminum radiator on the back to dissipate heat ，Reserve fan mounting holes, suitable for more DIY projects..
【Adjustable Voltage 】1200W 20A DC converter boost Input voltage range is DC 10-60V, Output voltage range is DC 12-80V.can be arbitrary adjustable.
Input current: 0.5-20A (MAX),Max output power is 1200W.(exceeds 15A, please add fan cooling）.
【Output Power】Input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W，input 60V * 20A = 1200W Note: Do not use the short-circuit output method to adjust the current. It is recommended to use a smaller adjustment range..
【Widely Application】can be used for high power solar street lamp driving, various LED lighting CV driving, vehicle-mounted and mobile device power, DIY adjustable CV CC power, solar power charging, and various batteries charging..

Check Stock

Dasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer

【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
ultra-low input and output pressure difference..
【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.

Check Stock

Juried Engineering LM393P LM393 IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)

Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.

Check Stock

Juried Engineering LM324N LM324 Quadruple Independent High-Gain Frequency-Compensated Operational Amplifier Op-Amp IC DIP-14 14-PIN DIP Breadboard-Friendly (Pack of 3)

The LM324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages..
Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA Typical, Wide Supply Ranges:003c/b003e Single Supply: 3 V to 32 V Dual Supplies: ±1.5 V to ±16 V.
Low Input Bias and Offset Parameters - Input Offset Voltage: 3 mV Typical - Input Offset Current: 2 nA Typical - Input Bias Current: 20 nA Typical.
Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground.
Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: 32 V.

Check Stock

Juried Engineering LM324N LM324 Quadruple Independent High-Gain Frequency-Compensated Operational Amplifier Op-Amp IC DIP-14 14-PIN DIP Breadboard-Friendly (Pack of 10)

The LM324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply or split supply over a wide range of voltages..
Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA Typical, Wide Supply Ranges:003c/b003e Single Supply: 3 V to 32 V Dual Supplies: ±1.5 V to ±16 V.
Low Input Bias and Offset Parameters - Input Offset Voltage: 3 mV Typical - Input Offset Current: 2 nA Typical - Input Bias Current: 20 nA Typical.
Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground.
Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: 32 V.

Check Stock

KOOBOOK 2Pcs Mini DC-DC Boost Step-up Power Supply Module 3.3V 3.7V 5V 6V 7.2V 9V to 12V Voltage Regulator Converter

1.2A current limiting resistor,Remove the resistance, the maximum input current can reach 2A..
But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150....
DC-DC Boost module working frequency 1.0MHZ..
2.54mm pin pitch,Arduiuo UNO DUE Breadboard FPGA / CPLD Development Board friendly..

Check Stock

Juried Engineering LF347N LF347 Quad High Speed JFET-Input Operational Amplifier Op Amp Breadboard-Friendly IC DIP-14 (1 Piece)

The LF347 devices are high-speed, JFET-input operational amplifiers.
Low Input Noise Current: 0.01 pA/√Hz Typical.
Low Total Harmonic Distortion, High Slew Rate: 13 V/ms Typical.
Low Supply Current: 8 mA Typical, Gain Bandwidth: 3 MHz Typical.

Check Stock

Omron EE-SX671 Slotted Optical Micro Sensor 4 Pins ! WOW !

Price For: Each Sensing Range Max: 5mm Output Current: 100mA Sensor Output: NPN Supply Voltage DC Min: 5V Supply Voltage DC Max: 24V Input Current: 35mA Input Current Max: 35mA No. of Channels: 1 RoHS Compliant: Yes.

Check Stock

JBL BASSPROSL Powered 8 (Renewed)

General Specifications Amplifier Power125W RMS Fuse20A Maximum Current Draw12A Quiescent Current Drawless than 800mA Input Sensitivity0.2V – 2V Line-Level Input.
2V – 20V High-Level Input Audio Specifications Frequency Response35Hz – 120Hz Crossover Frequency50Hz – 120Hz Crossover Slope12dB/octave Bass Boost0dB to +9dB @ 70Hz.

Check Stock