Top Crowfoot Wrench Sets Reviews

ARES 33009 – 3-Piece Spring Loaded Auto Adjusting Crowfoot Wrench Set – Adjustable Wrench Set with 5 to 32mm (3/16-Inch to 1 1/4-Inch) Coverage – Male & Female Square Drives for Increased Versatility

  • DESIGN: This auto adjusting crowfoot wrench set is the perfect solution to your search for the right tool in the middle of the job. With spring loaded adjustable jaws that adjust to fit the exact size needed and ratchet with each turn, these wrenches have enough coverage to replace a variety of wrenches. The 1/4-inch drive covers 5 to 11mm (3/16-inch to 7/16-inch), the 3/8-inch drive covers 8 to 17mm (5/16-inch to 11/16-inch), and the 1/2-inch drive covers 14 to 32mm (9/16-inch to 1 1/4-inch)..
  • QUALITY: Our crowfoot wrenches’ adapter bodies and jaws are finished with manganese phosphate and chrome plated finishes, providing your tools with increased durability and protection against wear, tear, rust, and corrosion. Thanks to the wrench jaws’ serrated toothed design and heavy duty chrome vanadium steel construction, you can approach any job with confidence knowing your wrench will not slip or stick in use..
  • APPLICATIONS: Thanks to their male and female square drive ends, you can use these wrenches flexibly with a wider variety of ratchets and extensions for added leverage and control. Whether you’re working on tie rod removal, plumbing jobs, or loosening and tightening hex nuts and bolts, this auto-adjusting crowfoot wrench set has you covered on ....
Check Stock

Powerbuilt 2 Piece Spring-Loaded Crowfoot Wrench Set, Adjustable, Auto Size, Universal, Self-Adjusting, Power Grip , Rapid Wrench- 240274

  • HANDY ADDITION: the 2- Piece Spring Crowfoot Wrench Set can do the work of multiple wrenches, leaving more space in your toolbag and speeding up your job by eliminating the search for those single sized wrenches.
  • WORK FASTER: The innovative crowfoot wrenches are spring loaded and auto adjusting to the size of the fastener.
  • the jaws ratchet back between turns eliminating the need to remove and replace the wrench when tightening or loosening fasteners.
  • REPLACES SEVERAL WRENCHES: This 2 piece set in 3/8 inch and 1/2 inch in combination have a wide usable working range.
  • 3/8 inch drive wrench jaw range is 5/16 inch to 11/16 inch.
  • 1/2 inch drive wrench jaw range is 9/16 inch to 1 1/4 inch.
  • MULTIPLE DRIVE OPTIONS: The wrench set has both male and female square drive options.
  • use a breaker bar, ratchet, or bar extension.
  • BUILT TOUGH: Made of tough Chrome Vanadium Steel for a lifetime of use.
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

VCT 10 Pc 3/8' Drive Fully Polished Metric Flare Nut Crowfoot Wrench Set

  • 3/8 in. Drive Crowfoot Flare Nut Wrench Set includes 10 pieces of all sizes between 10mm and 22mm--the most common sizes used for automotive repair. Each wrench is made with drop forged alloy steel and designed with an open side and a 15-degree offset at each end. This set comes mounted on a storage rail for convenient transport and storage..
  • Includes 10 Crowfoot Flare Nut Wrenches from 10, 11, 13, 14, 15, 16, 17, 18, 19, 22mm.
  • Open side at each end allows for easy access over lines and tubing while still providing 5 sides for a maximum on fasteners.
  • 15-degree offset provides clearance for your fingers and other obstructions near the fastener.
  • Drop forged alloy steel material provides strength and comfort.
Check Stock

NEIKO 03325A ½” Drive Jumbo Crowfoot Wrench Set | 14 Piece | SAE | 1-1/16” to 2” | Cr-Mo Steel

  • [PRO QUALITY]: This professional grade set includes 14 high quality 1/2 inch jumbo crowfoot flare nut wrenches ranging in size from 1-1/16” to 2” for all your home and automotive jobs..
  • [DURABLE]: This wrench set is made of durable, industrial grade, heat-treated, drop forged chrome molybdenum alloy steel that won’t easily break nor rust to promote long-lasting service life..
  • [VERSATILE]: These open-end sockets are ideal for diesel and automotive maintenance in any car or truck garage and can be used with any 1/2" drive ratchet, extension or torque wrench to reach tight, narrow spaces or deep recesses where 6- and 12-point sockets just won’t fit..
  • [INCLUDES]: 14 jumbo sizes for 1/2" drive crowfoot wrenches ranging in size including 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1- 1/2", 1-5/8", 1-11/16", 1-3/4", 1-13/16", 1-7/8", and 2”..
  • [CONVENIENCE]: Includes a hard plastic blow-molded case for convenient storage and organization along with clearly marked identification on each wrench..
Check Stock

HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
  • 3 Different types of sockets cover various situations of oxygen sensor locations.
  • Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
  • Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

  • 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
  • USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock

ATPEAM Oxygen Sensor Socket Set 3 Piece O2 Sensor Socket Set Oxygen Sensor Removal Tool Set 1/2in and 3/8in Sq Drive

  • Extra Durable: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
  • Application: Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
  • Features: 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (driver tools not included).
  • Specification: The specification for these oxygen sensor sockets are: 1pc 3/8 inch Drive 7/8 inch (22 mm) Deep, 1pc 3/8 inch Drive 7/8 inch (22 mm) Crowfoot, and 1pc 1/2 inch Drive 7/8 inch (22 mm) Deep Crowfoot Sockets, 1pc plastic red or blue carrying case.
  • Wide Application: Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
Check Stock

Apeixoto Oxygen Sensor Removers 5PCS Oxygen Sensor Sockets with Packing Case Oxygen Sensor Socket Set Removal Tool

  • Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum switches and fuel injections. These tools can be used most vehicles..
  • Package: The package includes 5pcs sockets and wrenches included in the red case.The whole tool set comes in a solid red case which will protect the tools well during shipping and let you keep the tools well after usage..
  • Specifications: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
  • Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..
Check Stock

BILITOOLS 14-Piece Jumbo Crows Foot Wrench Set, 1/2" Drive Big Crowfoot Wrench, Metric, 27-50 mm, CR-V Steel

  • Set included: 27mm, 30mm, 32mm, 33mm, 34mm, 35mm, 36mm, 38mm, 41mm, 42mm, 45mm, 46mm, 48mm, 50mm.
  • This wrench set is made of high strength chrome vanadium steel construction with rust preventative mirror chrome finish, that won’t easily break nor rust to promote long-lasting service life..
  • This crows foot wrench set can be used with any 1/2″ drive ratchet, extension or torque wrench to reach tight, narrow spaces or deep recesses to get the job done..
  • 1/2" drive jumbo crowfoot wrench set is designed for reaching fasteners and fittings in hard-to-reach areas or tight spaces..
  • This jumbo crows foot wrench set is ideal for diesel and automotive maintenance in any car or truck garage..
Check Stock