Top Crimp Pump Reviews

Leisure Lectronics Variable Livewell Timer Aerator Pump 12V Switch for Boat

  • MADE IN USA. Runs pump for 30 seconds, with pauses adjustable from 5 Seconds to 5 Minutes..
  • Fast, simple control: Just turn knob. 12V, 10A. Simple wiring diagram included. Sealed case..
  • 3 industrial grade terminals come with crimp-on wire connectors to resist corrosion and loosening..
  • Water resistant, but for protected in-dash installation. Threaded brass shaft fits panels up to 5/8".
  • 4" x 1 x 1.75, including knob. Drill one 3/8" hole. Requires 4 clearance behind panel..
Check Stock

Tool Daily Sewer Jetter Kit for Pressure Washer, 1/4 Inch NPT x 100 FT Hose, Sewer Jetting Nozzle Button Nose, Orifice 4.0, 4400 PSI

  • Sewer jetting kit contains sewer jet hose, button nose sewer jet nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick connect plug..
  • Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4″ high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone..
  • Sewer jetting hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp..
  • Button nose sewer jet nozzle: 1 front jet at 0° that clears blockages in the clogged pipe. 3 rear jets at 33° flush out debris loosened by the front jet. It is easy to slide into sewer lines and drain pipes. The jets move the nozzle through the pipe and provides an even cleaning. Ideal for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.0..
  • The sewer jet hose can connect to pressure washer gun or wand with 1/4’’ quick connect plug. It also can connect to pressure washer pump (water outlet) with coupler attached (M22 female to 1/4’’ female NPT coupler)..
Check Stock

HKS Spark Plug Connector Crimping Tool For Ignition Cable and Spark Plug Wire – Ratcheting Wire Crimpers – Max Diameter 8.5mm – Ratchet Terminal Crimper – Electrical Crimping Tool

  • Professional Crimper – This crimper features an efficient ratchet mechanism and finish-machined crimp die for a solid crimp. This crimping tool fits perfectly with spark plug terminals with a diameter of 8-8.5mm..
  • Precise Mechanics – The crimping process is accomplished by pressing the handle through a complete ratcheting cycle until the handle is automatically released. Due to the ratchet, you are able to secure the connector first and then insert the wire into the crimp..
  • Adjustable Crimp Force – The tool has a knob that adjusts the crimp strength to ensure the right crimp force for your project. Equipped with a quick release lever allows the crimper jaw to be opened in any position..
  • Ergonomic Handles – Ergonomic, cushioned, non-slip handles are designed to ensure a strong grip in all situations..
  • Crimp & Strip 2 in 1 – Suitable for single & dual spark plug crimp terminals.The crimper fits for the spark plug wire diameter of 8.5mm..
Check Stock

IWISS Angle PEX Crimping Tools Combo Kits for 1/2\ & 3/4\ Pex Crimp Rings with Go/No-Go Gauge with PEX Pipe Cutter Suits for All US F1807 Standards Copper Rings

  • All-in-One PEX Piping Tool Kit: IWS-1234C PEX plumbing kit is designed to make copper crimp ring and copper sleeves connections in sizes 1/2-inch to 3/4-inch. The tool set includes PEX crimping tool(1), PEX cutter(1), 1/2’’ copper crimp ring(20), 3/4’’ copper crimp ring(10)..
  • Patented Copper Crimp Ring: Annealed copper crimp rings are used to secure PEX piping to F1807 Brass or PPSU fittings. Designed for longevity and durability..
  • PEX Crimping Tool: Dual cavity plumbing PEX crimping tool for PEX Copper Crimp Rings 1/2" & 3/4". Allows for a one-handed crimp. Angle head design is useful for working overhead and in tight areas as it easily fits between joists. .
  • PEX Cutter: Shear cutter tool ideal for cutting tubing for water applications. Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. Cuts through PEX tubings like butter..
  • Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Apollo, etc.)..
Check Stock

IWISS PEX Copper Pipe Ring Crimping Tool Kit for 3/8 in 1/2 in 3/4 in 1 inch Pex Crimp Rings Meets F1807 Standard

  • Multi-Head PEX Crimp Tool Kit: IWS-FAS copper ring crimp tool kit includes 3 exchangeable die sets(1/2'', 3/8'', 3/4'') and built-in 1'' jaw, Go/No-Go....
  • Purpose: IWS-FAS F1807 PEX crimp tool kit is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 4 major sizes of PEX tubing - 1/2", 3/8", 3/4" and 1". Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX....
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

Mastercool Blue 71500-A Hydra-Krimp AC Hose Crimper,Black

  • ACCEPT NO IMITATIONS, Mastercool’s US designed A/C crimper has been the standard for over 25 years.
  • IDEAL FOR SHOP AND FIELD APPLICATIONS, the mobility of the 71500 allows the technician to work directly to repair or fabricate a/c hoses on the....
  • HYDRAULIC BODY CREATES OVER 10,000 PSI OF PRESSURE allowing technicians to recrimp existing hose assemblies that might have a leak.
  • MASTERCOOL’S DIES ALLOW FOR AN OE DESIGN 6 SEGMENTED CRIMP to ensure no leaks.
  • EASY TO USE HYDRAULIC HAND-HELD PUMP crimps the hose fitting in under 10 pumps.
Check Stock

rj45 pass through crimp tool,rj45 crimp tool kit,EZ crimp tool, ethernet crimper network tool cat6 Cat5 Cat5e Pass Through cat 5 crimping tool kit

  • rj45 crimp tool,★About crimping tool, you will get: (1) 10 PCS crimping tool blades (multiple copies of crimping tool blades are GWFIBER adopting the customer’s suggestion) (2) 1PCS RJ45 Crimp Tool Pass Through.
  • rj45 crimp tool,★About gadgets you will get: (3) 25 Pcs CAT6E/CAT6 rj45 connectors pass through, and 25 PCS Cat5/Cat5e RJ45 connectors Ends 8P8C, total of 50 PCS) Wider application range, let you crimp successfully at one time! (4)10PCS RJ11 6P4C Telephone Plug FU Gold-Plated, (5)1PCS 8p8c RJ45 coupler, (6)1PCS 1 to 2 8P8C Ethernet cable rj45 Adapter,(7) 1PCS punch down tool,(8)50PCS RJ45 cover protects(Five colors).
  • rj45 pass through crimp tool,★About the rj45 tester, you will get: (9)100M network cable tester, (10) Rj45 tester 9V battery,(11)1PCS Cat6 Cable 3FT (to help you compare and verify Test Crimp results) (12)10PCS connector K2 can help you repair broken network cables.
  • rj45 crimp tool,★rj45 crimp tool pass through The suit configured by professional engineers is easy to use, and the straight-through function can prevent crimping errors. Non-professionals can also use.
  • rj45 crimp tool,★GWFIBER Providing life-long service for customers! No worry after purchasing about service..
Check Stock

Redding 9mm Luger Taper Crimp Die Straight Wall Case

  • A taper crimp gently tapers tighter and tighter to hold the bullet in place.
  • This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length.
  • Redding Taper Crimp Dies are designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable.
  • Available for some revolver cartridges for those who prefer the uniformity of a taper crimp.
  • The die has standard threads (7/8" x 14tpi), so can be used on most reloading machines. Case lube is not required on crimp dies.
Check Stock

AMZCNC Copper Tube Fittings Crimping Tool Copper Pipe Crimper Press with 1/2,3/4 and 1 inch Jaw for ProPress Copper Fitting-Manufactured Plumbing, Pipe Press Copper Crimp Tool

  • Built-in Dual Jaw: IWS-1234PS copper ring crimp tool with built-in 1/2”&3/4'' well-polished jaw, Go/No-Go gauge,and instruction manual on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Purpose: IWS-1234PS F1807 PEX crimp tool is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 2 major sizes of PEX tubing - 1/2" and 3/4" Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, etc.
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

PH PandaHall 200pcs 5mm Stainless Steel Bead Tip Cord Ends Open Clamshell Crimp Bead Tips Knot Covers End Caps Jewelry Findings for Bracelet Necklace Making DIY

  • ★ WHAT YOU GET: Contains 200 pieces stainless steel bead tips knot covers.
  • Size: about 0.2"/5mm long, 0.12"/3mm wide, 0.08"/2mm thick, hole: 0.04"/1mm, inner diameter: 0.12"/3mm.
  • ★ MATERIAL QUALITY: These bead tips knot covers are made of quality stainless steel material, which is tarnish resistant, and skin friendly. Ideal for everyday use.
  • ★ WIDE USAGES: Bead Tips Knot Covers are used to conceal knots at the ends of beaded strands and to connect the strands to the clasp. Great sizes and secure styles in these versatile, all time favorite components.
  • ★ VERSATILE FUNCTIONS: Crimp covers are open on one side allowing them to slip over the crimp tube. They are designed to fit over the crimped bead. They look like a bead, so it gives the design a more finished look. They are used with beading wire to secure the start and finish of the strand by crimping the crimp beads.
  • ★ BEAD TIPS: Using the right size crimp bead is also very important. If the crimp is too large for the jewelry wire, it won't be able to grip the wire properly and it could slip, causing the jewelry piece to fail. If the crimp is too small, particularly with crimp beads, the jewelry wire won't have room to separate for the crimp action and you won't get a good fold.
Check Stock

Beadalon Bead Crimp Tool Mighty

  • Close and secure Beadalon Crimp Beads and Crimp Tubes.
  • Beadalon #3 Crimp Beads or #3, #4 Crimp Tubes.
Check Stock

IWISS PEX Crimping Tool Combo1/2-inch 3/4-inch Plumbing Tool Copper Crimp Ring with Go/No-Go Gauge Conforms to ASTM F1807 Standards

  • Built-in Dual Jaw: IWS-1234PS copper ring crimp tool with built-in 1/2”&3/4'' well-polished jaw, Go/No-Go gauge,and instruction manual on how to....
  • Purpose: IWS-1234PS F1807 PEX crimp tool is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 2 major sizes of PEX tubing - 1/2" and 3/4" Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX....
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

Ancor 320125 Heat Shrink Step Down Butt Connector 22-18/22-14 AWG - 25 Pieces

  • 4: 1 shrink ratio tubing to ensure a watertight seal between wires.
  • Flared barrel with uniform copper wall ensures an easy and proper mechanical crimp.
  • Crimp indicator on barrel for proper placement of installation tool.
  • Clear heat shrink tubing ensures crimp accuracy.
  • Colored stripes on the barrel indicate which crimp die to use, regardless of application.
Check Stock