Top Crankshaft Pulleys Reviews

palart 1 Set 3/4" to 1" inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter for Predator

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

Check Stock

Gas Engine Pulley Adapter Kit, 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

Check Stock

VMS RACING 94-97 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1994-1997 1.8L BP-ZE Engines ONLY OEM SIZE (uses same belts)

APPLICATION ENGINE -- 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN. Replace OEM 303-1437.
FOR VEHICLE MODEL -- For Jaguar vehicle applications include: F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 - 2018, For Land Rover vehicle applications include: Discovery 4/Discovery, For Range Rover, Range Rover Sport 2009 - 2018..
FUNCTION -- Set of tools required for the removal and installation of the front crankshaft pulley(Crankshaft Vibration Damper) for Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines. A must have for removing and installing for land rover jag crank pulley..
BENEFITS -- The crankshaft pulleys used on these engines are tightened to 200 Nm + 270 degrees, so are very tight to undo. This kit helps hold the pulleys tight. Also included in the kit are the puller component’s required to remove the pulley without damage..
SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.

Check Stock

OTC 6613 Variable Pin Spanner Wrench

OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.

Check Stock

LicBund 5/8" to 3/4 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Pulley Bore Reducer Bushing Sheave & Key Predator

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

Check Stock

Assault Racing Products 2253KIT-BK Big Block Chevy Black Billet Aluminum Gilmer Belt Drive Pulley Kit BBC 427 454

Short / Long Style Mechanical Water Pumps up to 5/8in Shaft.
Water Pump Pulley, Crankshaft Pulley, Alternator Pulley, Belt.
Water Pump and Crankshaft Pulleys are 1:1 Ratio.

Check Stock

Variable Cylinder Spanner Wrench Set | 15Pc Adjustable Pin Spanner Wrench with Variable Spanner Wrench Pins

◇ Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
◇ Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
◇ Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
◇ The 12-inch (30.5cm) long small pin wrench Works with a 1/2 inch drive ratchet or breaker bar for an extended reach and added torque.
◇ Durable steel material with manganese phosphate finish provides maximum strength and resistance to corrosion.

Check Stock

1 to 1-1/8 inch 1/4 Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator

This steel shaft sleeve adapts a crankshaft from 1” to 1-1/8” diameter. It comes with 1/4“ stepkey..
Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Part’s specification:Sleeve inside diameter 1”,Sleeve outside diameter 1-1/8”.
Sleeve length is about 3”,Sleeve Keyway slot 1/4”,Step Key Length is about 2”.
The sleeve and step key are designed to slip fit on your 1” diameter crankshaft with 1/4” keyway and enlarge it to 1-1/8 diameter with 1/4”....

Check Stock

aremnry Universal Pulley Holder Spread Wrench with Interchangeable Pin Camshaft Pulley & Fan Clutch Removal Tool Set

【Applications】 Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.Not applicable to 99 F-150 supercharged 5.4L crank pulley..
【Specifications】 Wrench is adjustable from 1-1/2 to 8-5/8 inches, four different size step pins: 0.24-0.39in, 0.31-0.43in, 0.39-0.47in, 0.43-0.62in..
【Durable】 Wrench tools kits are made of 45# Carbon Steel steel, durability and high strength, great resistance to corrosion and rust..
【EFFICIENT】 Long handle enables technician to easily hold the pulley when tightening or loosening retaining Bolts. and does the work a lot faster Convenient and Saving your time and energy..
【Easy Storage】 Equipped with blow-molded plastic carry case for easy transportation, simple storage, and quick organization..

Check Stock

DASBET Variable Cylinder Spanner Wrench Set | 15Pc Adjustable Pin Spanner Wrench with Variable Spanner Wrench Pins

Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
Wrench is adjustable from 1-1/4 inches to 5 inches (3.2 to 12.7cm) by loosening single adjustment bolt.
Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
Works with Existing Tools : 12-inch (30.5cm) long pin wrench attaches to your 1/2-inch drive ratchet or breaker bar for an extended reach and added torque.
Blow Mold Case: The adjustable spanner wrench set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Check Stock

OTC 6613 Variable Pin Spanner Wrench & OTC 7463 Fully Adjustable Gland Nut Wrench

Product 1: OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
Product 1: Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
Product 1: Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
Product 1: Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
Product 2: Fully adjustable Gland Nut Wrench fits hydraulic cylinders on vehicles having gland nuts from 1 inch to 3-3/4 inches in diameter.
Product 2: Reverses to work on either 7/32 or 1/4 inch pinholes.
Product 2: Designed for use with a 1/2 inch drive ratchet or breaker bar.
Product 2: High-grade materials ensure quality performance over the lifetime of the tool.

Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

... Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.

Check Stock

Wadoy 3/4 to 1 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator

This steel shaft sleeve adapts a crankshaft from 3/4 inch to 1 inch diameter, it comes with step key that offsets from 3/16 inch to 1/4 inch..
Alters motors with a different diameter shaft and alters pulleys for a different speed or belt..
Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements..
Adapts larger wheel bores to smaller axles, works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Made from cold rolled steel, precision machined and tumbled, high durability..

Check Stock