Top Craftsman Multimeters Reviews

Fluke i400 400 Amp AC Current Clamp

  • Companion to a digital multimeters to measure up to 200A AC.
  • 1mA per amp output guarantees easy reading on you meter.
  • Take accurate current readings without breaking the circuit.
  • Maximum conductor diameter 20mm, CAT III 600V safety rating.
  • Companion to your DMM to measure up to 400 A AC.
Check Stock

Micsig Oscilloscope AC/DC Current Probes with Standard BNC Interface CP2100

  • Maximum measurable current：100Apk（70Arms）.
  • Overload indication：Buzzer beeps, Light flashes.
  • Compatible with all BNC-connected oscilloscopes, adapters can also work with multimeters..
Check Stock

Fluke PV350 Pressure Vacuum Module

  • Compatible with all Fluke and most popular digital multimeters.
  • Digital pressure and vacuum measurements in a single module.
  • Transducer sealed in 316 stainless steel compatible with variety of liquids and gases.
Check Stock

TPI A110 UL Ceramic Fuse 10 Amp 600V For 100 Series Digital Multimeters Pack of 2

  • For use with 100 series digital multimeters.
Check Stock

Extech MN36 Digital Mini MultiMeter

  • Compact autoranging multimeters with 10 functions including temperature.
  • AC/DC voltage, DC current, resistance, capacitance, frequency, Type K temperature, continuity/diode.
  • Convenient mini size with protective rubber holster and tilt stand.
Check Stock

Innova 3347 Digital Multimeter AMP Probe

  • Ideal for testing alternator output, starter and battery current draw and all other electrical wiring circuits.
  • Features 2-foot test lead, slide switch for measurement selection and zero adjuster for calibration.
  • Red/Green indicator light shows power and low battery.
  • Designed to work with all Digital Multimeters.
Check Stock

17g Sterilized 2' Body Piercing Needles - Box of 100

  • 2mm banana plug adapter for connecting to 2mm banana jack leads.
  • easy to access to hard-to-reach test points.Wonderful probes for safely working on smaller electronics.
  • Tips are insulated to the point to prevent shorting of adjacent components.
  • fit fluke multimeters and fluke test leads tl71 tl75 tl75.
Check Stock

TPI A255 Soft Carrying Case For 255 Digital Clamp-On Meters and 120 Compact Digital Multimeters

  • For use with 255 digital clamp-on meters and 120 compact digital multimeters.
Check Stock

KAKOOTI Multimeter Test Leads Kit，2PCS Test Probes 1000V 20A 4PCS Silicone Alligator Clips Test, Multimeter Alligator Clips Set for Fluke/AstroAI/INNOVA/KAIWEETS Digital multimeter Clamp Meter

  • ...nd no signal loss. Leads: CAT II 1000V 20A..
  • ✅【Universal And Compatible】Multimeter leads probe cable clips multi plug tool kit. Multimeter Test Leads Probes and aligator electric clip makes electrical work easier and more precise. The Perfect test tool for precision testing devices. Perfectly fits all kinds of multimeters like digital clamp meters, digital multimeters, volt meter，ohm meter, electrical meter，bench power supply，multi meter electric tester，megger test leads，amp meter，esr meter，multimeter tester.
  • ✅【Sturdy & Heavy Duty】This crocodile clip is rust-proof, corrosion-resistant, oxidation-resistant, compact and durable.Silicon rubber material, double insulation, Each crocodile clip overall jaw perfect solid bite, they are clamping tight, long-term use without deformation.
  • ✅【Conductivity] 】The test lead set has excellent tensile strength and bending strength, as well as low strength and excellent electrical conductivity. It is very useful for electricians and maintenance personnel of electronic products. Test lead set connects a compatible electrical test meter to a device for testing. Use a very wide range for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing.
Check Stock

POSEAGLE 302565ma Snow Blower Paddles Replaces Craftsman 302565 Auger, 302565ma,335992 Murray 335992ma, Snapper 1687312SM with Murray 55323ma Scraper Blade and 762259MA, 1501122ma Cable

  • 302565MA Auger Blade Replaces Compatible with Murray Craftsman 302565MA, 302565, 723006, 335992MA, 335992, 723675, 57121, 730-340, Snapper 1687312, Snapper 1687312YP, Snapper 1687312SM.
  • 55323MA Scraper Blade Replaces Compatible with Murray 55323, Murray 55323MA, Murray 724453, Craftsman 55323, Craftsman 55323MA, Craftsman 724453.
  • 762259 Auger Drive Cable Replaces Compatible with Craftsman 762259ma, Craftsman 762259, Murray 762259MA, Murray 1501124MA.
  • 1501122ma Front Drive Lower Cable Replaces Compatible with Briggs and Stratton 1501122MA, 313449MA, 722095, MT1501122MA, Craftsman 1501122MA, Craftsman 313449, Craftsman 1501122, Murray 1501122.
  • Fits for Craftsman 22" Single Stage Snowthrowers Such as 536.88150, 536.885213, 536.881501, 536.885210, 536.88140, 536.885214, 536.885200, 536.881500, 536.885211, 536.885203, 536.884220, 536.884670, 536.881510, 536.881510, 536.884351, 536.881400, 536.885214, 536.885213.
  • Fits for Murray Single Stage Snowthrowers Such as 620301x Series, 621450x Series, 621451x Series, 621453x Series, 6210540x Series, 621500x89, 621501x31, 621520x43.
Check Stock

Replacement Test Lead Set Right Angle Klein Tools 69410

  • Standard banana-type inputs compatible with most multimeters and clamp meters.
  • Removable alligator clips attach to wires and other conductors.
  • Includes one pair of universal test leads and one set of alligator clips. Leads are 41-Inches (1,041 mm) long.
  • Safety Rating: Category III 1000V and Category IV 600V.
  • Leads compatible and fit lead storage compartment on most Klein test and measure products.
Check Stock

Fluke PRV240 Proving Unit

  • PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment.
  • Sources both AC and DC steady-state voltage - supplies 240 V DC/AC.
  • A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool.
  • Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers.
  • Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact.
Check Stock

Type K Pipe Clamp Temperature Lead Probe HVAC Pipes Jaw Clip Plumbing Clamp

  • Good for Multimeters, clamp Meters and thermometers that accept a type K temperature probe..
  • This K-type probe pipe clamp's operation temperature: -40~200℃..
  • Probe connection type: K-Type pipe clamp..
  • A good K type pipe clamp accessories for temperature measurement..
  • Lead thermocouple clip,Suitable for industrial temperature measurement..
Check Stock