Top Cr 1mini Nozzle Size Reviews

Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm

Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S.
Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock.
This is a Drop in All Metal Conversion Kit for CR-10 printers.

Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
Tip of the nozzle, aluminum heating block, throat pipe ..

Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..

Check Stock

BIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts

⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
⭐【Package Including】: 2 * 4mm PTFE Tube.
Compatible with 100K NTC 3950 thermistors.
Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..

Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..

Check Stock

ZIONOR Kids Swim Goggles G1MINI Polarized Swimming Goggles Comfort for Age 6-14 UV Protection Anti-Fog Adjustable Strap Fit for Child Boys Girls Gold Lens

[Special Polarized Kids Swim Goggles] - The unique polarized lens of our ZIONOR G1MINI kids swim goggles can filter out most of harsh glare and....
[Excellent UV Protection and Anti-fog Functions] - This swim goggles for kids featured with enhanced UV protective layer can blocks most of the....
[Pretty Comfortable to Wear] - The ultra soft 3D stereoscopic frame make our ZIONOR kids swimming goggles having a excellent suction for better....
[More Stable and Durable Strap] - The strap are made of liquid silicone and have anti-slip design, make it more stable and not easy to break than....
[More Fashionable for Girls and Boys] - Our ZIONOR G1MINI kids polarized swim goggles is the same styles with G1 polarized swim goggles for adult.....

Check Stock

HICTOP CR-10 Hotend Full Assemble MK8 Extruder Fit for Creality 3D Printer CR-10 CR-10 mini CR-10S 3D Printer Replacement Parts

Easy for the CR-10 hotend to Assemble: Packed whole extruder kit, just fix it on X axis and connect to control box, it will work..
2 Durable Quality: plug and play cr-10 hotend assembly with high quality..
3 Fit for: Creality CR-10, CR-10S, CR-10 Mini and similar 3D printers.
4 Stable Material: Aluminum, stainless steel, brass and MK8 nozzle.
5 Extruder kit : cr-10 hotend with thermistor, heater carriage, and two cooling fans..

Check Stock

HICTOP Upgraded Replacement Aluminum MK8 Extruder Drive Feed for Creality 3D Printer Ender 3/3Pro CR-10 CR-10S CR-10 S4 and CR-10 S5 Dual Gear Extruder

1.Dual gear extrusion mechanism, high extrusion force, ensure smooth feeding, you need to change the extruder e-steps from 100 to 140.
2.Perfect upgrade replacement for Creality 3D Printers CR-10, CR-10S, CR-10S Pro, Ender-3, Ender 3 pro, Ender 5 ,Tornado etc. stable and durable..
3.All-metal extruder aluminium alloy, DIY aluminium block, self-assembly.
4.Update on 2021/04/26: The too long spring has been changed to the right size.
5.Better pressure pushes the filament into the printer nozzle.

Check Stock

Haldis 3D Red Lizard k1 V6 Hotend Assembled Plated Copper Hot end High Flow Rate Extrusion Head for Voron 2.4 Prusa I3 MK3 Titan BMG V2 Extruder 3D Printer Parts Red

【INTEGRAL FRAME RIGID STRUCTURE】: 1:Protect the heat break from external force. 2:One-hand nozzle replacement more simplest without grasping the....
【BI-METAL HEATBREAK】:High quality titanium alloy + plated copper,real bimetal material Copper and Titanium TC4. Titanium TC4 reduces heat upward....
【PLATED COPPER HOT BLOCK】: Premium material with surface Nickel plating,Rated to 550 °C for even the most demanding tasks,Compatible with all....
【PLATED COPPER PRINTING NOZZLE】: 0.4MM Standard nozzle,Non- stick, high performance, high temperature about 550°C, Excellent precision....
【V6 J-HEAD HOTEND】: Compatible with all 1.75mm E3D V6 Makerbot 3D printer. For CREALITY CR-10 CR10S ENDER-3 V2 ENDER-3 PRO ENDER 5 ENDER-5 PRO....

Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

[Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
[High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
[High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
[Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....

Check Stock

ZIONOR Kids Swim Goggles, Polarized Swimming Goggles for Girls and Boys, UV Protection Anti-Fog Adjustable Strap Fit for Child and Youth （Gold Lens）

[Special Polarized Kids Swim Goggles] - The unique polarized lens of our ZIONOR G1MINI kids swim goggles can filter out most of harsh glare and surface reflections, enhanced vision clarity and color purity, significantly reduce eyestrain and protect eyes better.
[Excellent UV Protection and Anti-fog Functions] - This swim goggles for kids featured with enhanced UV protective layer can blocks most of the harmful UV rays. And have advanced anti-fog coating, provides high definition and panoramic views, children can play in the water more safely without obstacles.
[Pretty Comfortable to Wear] - The ultra soft 3D stereoscopic frame make our ZIONOR kids swimming goggles having a excellent suction for better leakproof. It’s more comfortable than small frame swim goggles for child, you needn't worry about the raccoon eyes.
[More Stable and Durable Strap] - The strap are made of liquid silicone and have anti-slip design, make it more stable and not easy to break than general silicone. Kids can adjust the strap easily and independently through our ZIONOR unique strap adjustment system.
[More Fashionable for Girls and Boys] - Our ZIONOR G1MINI kids polarized swim goggles is the same styles with G1 polarized swim goggles for adult. This really cool than othe....

Check Stock

Ickiya All Metal Extruder Kit 500° High Temperature High Speed 3D Printer Extruder Hot end Kit for Ender 3/CR10/VORON 2.4 3D Printer Blue

Fits: CR-10S Pro / CR-10 Max/Ender3 V2/ Voron 2.4 etc..
Orifice size: 0.4mm MK8 Hardened Steel Nozzle.
The copper heating block is upgraded, Add PT100 hole position..
High temperature resistance, standard all-metal kit, overall high temperature resistance.(It is not recommended to apply 500 ° high -temperature....
Compatible with all filament PLA, ABS PETG, TPU, PP, PC, Nylon, PEEK, PEI and composites containing abrasive additives such as carbon fiber, steel,....

Check Stock

3D Printer Part, 5PC 0.4mm Brass Extruder Nozzle Print Head+ 5PC 30mm Length Teflon Throat Tube+ 5PC Heater Blocks Hotend for Anet A8/A6 3D Printer

Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm.
a set of 25pcs printer nozzles，wrench and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle..
Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging..
Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother..

Check Stock