Top Cpu Module Reviews

HiLetgo RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi

  • The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip..
  • Easy to use, low cost, and applicable to equipment development and card reader development etc..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • The module can be directly loaded into the various reader molds..
  • The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance..
Check Stock

HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi

  • The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip..
  • Easy to use, low cost, and applicable to equipment development and card reader development etc..
  • Applicable for the user who need to design or manufacture the RF card terminal..
  • The module can be directly loaded into the various reader molds..
  • The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance..
Check Stock

DDR2 Ram, 4GB 800MHz PC2-6400 DDR2 RAM 240-Pin 1.8V, DDR2 Memory Module for Desktop Computer Memory Module

  • Excellent Performance: This DDR2 memory module has a large memory of 4GB RAM, and a high storage frequency of up to 800MHz creates ultra-high-speed data transmission, which can ensure the stability and smoothness of data transmission.
  • Applicable Field: This DDR2 memory module can only be used for AMD motherboards and does not support for Intel processors. If the motherboard is equipped with DDR2 interface and the CPU is suitable for AMD, this product is compatible with your device. But if the motherboard is too old, and the motherboard does not support 4G memory, this product is not suitable for your device.
  • Ideal Computer Accessories: This DDR2 memory module can meet the needs of most gamer for high data transmission performance, it is the ideal accessory for your computer.
  • 240PIN: This DDR2 memory module uses 240PIN to achieve high anti-interference and anti-static performance.
  • Plug and Play: This DDR2 memory module supports plug and play, simple and convenient, without driver.
Check Stock

MSI Arsenal Gaming Intel Z170A LGA 1151 DDR4 USB 3.1 Micro ATX Motherboard (Z170M Mortar)

  • LGA1151 Supports 6th Generation Intel Core i7/ i5/ i3/ Pentium/ Celeron Processors Chipset: Intel Z170.
  • Memory: 4x DDR4-3600(OC)/ 3200(OC)/ 3000(OC)/ 2800(OC)/ 2600(OC)/ 2400/ 2133 Slots, Dual Channel, ECC, Unbuffered, Max Capacity of 64GB .Install CPU/heat sink fan in the motherboard first before mount inside case, by properly installation of CPU and heat sink fan will prevent bent pin on motherboard CPU socket..
  • Slots: 2x PCI-Express 3.0 x16 Slots (one runs at x4), 2x PCI-Express 3.0 x1 Slots, 1x M.2 Wi-Fi Module Slot.
  • Storage: 6x SATA3 Ports, Support RAID 0, 1, 5, 10.
  • Form Factor: MicroATX, 9.6 x 9.6 inch / 24.4 x 24.4 cm.
Check Stock

AITRIP 6pcs D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth Development Board 5V Compatible with Arduino

  • Wireless WiFi Bluetooth 2 in 1 dual-core CPU module MINI KIT ESP32 module development board module.
  • 100% compatible with Arudino IDE, Lua and Micropython.
  • Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality.
  • All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO.
  • It has a similar pin layout to the conventional D1 Mini ESP8266-12F and is therefore pin-compatible with most accessories for it..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

BestParts Voltage Regulator VRM Thermal Module for Dell XPS 8940 OptiPlex 7080 G5 SE 5000 612F7 VR HeatSink

  • New and HQ Voltage Regulator Thermal Module for Dell XPS 8940 OptiPlex 7080 G5 5000 ..
  • VR HeatSink is the components that convert your 12V to the voltage your CPU needs..
  • Package included: 1 x Voltage Regulator Thermal Module..
  • Compatible for Model: Dell XPS 8940 Desktop Special Edition, Dell OptiPlex 7080 Tower, Dell G5 SE 5000 Gaming Desktop series..
Check Stock

ACEIRMC 2pcs ESP32-CAM WiFi Bluetooth Board ESP32-CAM-MB Micro USB to Serial Port CH340C with OV2640 2MP Camera Module Dual Mode for Arduino

  • The ESP32-CAM-MB module is a small camera module with a size of 39.8MM*27MM.
  • ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
  • ESP32-CAM-MB module can work independently as the smallest system.
  • WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz.
  • Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

  • ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
  • User manual, refer to Geekworm WiKi search C235..
  • ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
  • ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
  • ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
  • ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..
Check Stock

Gskill F4-4000C18D-16GTZR Memory Card 16GB

  • DDR4-4000MHz (PC4-32000), 16GB (8GBx2), CL18-19-19-39, 1.35 volt, Unbuffered, Dual Channel, with full length RGB LED light bar.
  • Revolutionary RGB LED lighting effect designed to show off your system. Fluid rainbow wave default lighting effect..
  • Completely uncovered, full-length light bar. Highly screened ICs and custom 10-layer PCB for uncompromised overclocking performance..
  • Luxurious hair-line finish aluminium heat-spreaders with aggressive fin design for highly efficient heat dissipation. Intel XMP 2.0 profile support....
  • Chipset: Intel Z270 Platform CPU: Kaby Lake (LGA 1151) Module Height: 44mm / 1.73 in. Module Weight: 69g. Limited Lifetime Warranty.
Check Stock

DORHEA 5PCS ESP32 Development Board Type-C USB WiFi + Bluetooth ESP-WROOM-32 2.4GHz Dual Core WiFi NodeMCU Processor ESP32-DevKitC-32

  • Dual core ESP-32 development board, 2.4GHz dual mode development board. There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode..
  • The module is ESP-WROOM-32 module, the peripheral uses the USB serial port to expand the type c interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable..
  • The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal.
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold..
Check Stock

4pcs Temperature Controller Module with Case W1209 12V DC Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with Waterproof NTC Probe

  • 【W1209 Features】The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay.100% complete machine patch, wave soldering, stable performance, good consistency..
  • 【Embedded CPU Chip】The XH-W1209 led display digital thermostat module embedded CPU chip (MCU), is more intelligent, lower power consumption.
  • Automatic power set memory, MCU built-in EEPROM memory unit..
  • 【Temperature Controller Parameter】Temperature range: -50-110°C.
  • Control precision: 0.1 celsius.Input power (DC): 12V.
  • Output: 1 channel relay output, capacity: 10A.
  • 【Waterproof NTC Probe】The NTC probe is waterproof and can control the temperature, allowing to control heating or cooling.(The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin, which can protect the inside to prevent scratches.
  • And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.).
  • 【Package Includes】4pcs W1209 12V DC digital temperature controller board with case.(Ps: The product is not assembled, if you need assembly instructions or if ....
Check Stock

4PCS ESP32 ESP-32S WiFi Development Board NodeMCU ESP-WROOM-32 Microcontroller 2.4GHz Dual-Core WiFi Bluetooth Processor Integrated Chip CP2102

  • Dual core ESP-32 development board, 2.4GHz dual mode development board.There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode..
  • The module is ESP-WROOM-32 module, the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable..
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal.
  • ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values ​​exceed the threshold..
Check Stock