Top Countersunk Screw Anchor Reviews

12Pcs Black Shelf Brackets, 5

Size: 125 x 75 x 20 mm (L x H x W) / 5 x 3 x 0.78 inch.
【COUNTERSUNK SCREW HOLES】 Screw holes are countersunk design.
【HEAVY DUTY CORNER SHELF BRACE】Durable metal corner brackets are made of high quality cast iron with black coated finish, corrosion and rust resistance.
The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance.
【5″x3″ RIGHT ANGLE BRACKETS】Package include: 12pcs L brackets, 72pcs screws and 24pcs expansion pipes.
【WIDE APPLICATIONS】 Black 90 degree bracket is perfect for shelving systems, widely used in bookshelf, furniture, table, garden and kitchen shelf.
Curved design makes the edge smooth and protect your hand from scratch.
【STRONG BEARING CAPACITY】 Heavy duty corner bracket has 3MM thick, thicker than other corner supports on the marketapply.
So the maximum support weight is 35lbs for a pair of L brackets.

Check Stock

Gusset Commer Grade .25x1.25x8

The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.

Check Stock

100#8 Countersunk Finish Washer Black Zinc Plated Brass

Material:Made of high quality 304 Stainless Steel,corrosion resistant, sturdy and durable..
Shiny washer that allows the screw to recess into the center giving a clean,decorative presentation..
Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance..
Washers are great to have around for use in wood and wet environments.Washers are usually used where larger outside diameters are required to increase the bearing surface and reduce the surface load..
Package included:100pcs #8 Countersunk Washers.The washer is designed for flat head or oval head screws..

Check Stock

Fastcap - Black (5-Pack) - 3-1/2" x 12" Speedbrace for Granite Counter-top Support, 300 Pound Load Capacity - 08176

POWER COATED STEEL: Made of thick 3/16'' powder-coated steel.
300 POUND SUPPORT: Supports your countertop with ease.
NOT VISIBLE: Nearly invisible when installed.
COUNTERSUNK SCREW HOLES: Screw holes are countersunk into the brace for a flush installation.

Check Stock

TOUHIA 50pcs #8 Finishing Washers Stainless Steel Cup Countersunk Washer

Package Content: 50pcs x Finishing Cup Washers.
Finish Washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance.
Countersunk washer can prevent a nut, bolt or screw from pulling through the material. Commonly used in automotive, pipe, and other electrical applicance.
Material: These finish washers are 100% Stainless Steel, corrosion resistant and rust resistant, can be used for a long time.
Risk Free Shopping: TOUHIA offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.

Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

Check Stock

30Pcs Black L Bracket Cast Iron 2” x 2” Corner Brace Heavy Duty 90 Degree Angle Bracket for Shelves Metal Corner Bracket for Wood Bed Furniture Cabinet

【Premium Material】Black l bracket made of Cast Iron with exquisite technology, durable and rust proof.
【Corner Bracket Size】50 x 50 x 17 mm (L x H x W) / 1.96 x 1.96 x 0.67 inch.
Tickness:2 mm/0.08 inch； Hole Quantity: 4 holes.
【Wide Applications】The right angle brackets can be used in a variety of furniture and hardware accessories, perfect for fastening chair, table,....
【Countersunk Screw】Screw holes are countersunk design.
The head of screw is not protruding after the screw has been screwed in, simple and....
【Package Include】30 Pcs Stainless Steel L Bracket, meet your daily requirements to make furniture parts stay firm.

Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

Check Stock

2.4 x 1.5 Inch Metal Flat Straight Brace Bracket 1.2 MM Thickness Metal Flat Straight Mending Plates Fixing Corner Brace 12 Pcs for Furniture, Wood, Shelves, Cabinet

Premium Material: Mending bracket plate made of Metal with exquisite technology, Smooth surface and edges without burrs..
Bracket Size: 38 x 60 mm / 1.5 x 2.4 inch.
Tickness:1.5 mm£» Hole Quantity: 4 holes.
Wide Applications: The flat corner brace can used in a variety of furniture and hardware accessories, perfect for fastening chair, table, window, furniture, dresser, shelf, drawer, etc..
Countersunk Screw: Screw holes are countersunk design.
The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance..
Package Include: 12 Pcs Repair plate bracket and 48 Pcs screws, meet your daily requirements to make furniture parts stay firm.
Remove the protective film on the surface before using the brackets..

Check Stock

24Pack Mending Plate with Screws, 3.12” Stainless Steel Flat Brace, Heavy Duty Flat Straight Brackets Metal Mending Plate for Wood Shelves Bed Table Chest Box Furniture

【Heavy Duty Flat Brace】The mending plate made of cast iron with exquisite technology, durable and hard.
【Straight Bracket Size】250x 20 mm / 9.84 x 0.78 inch.
【Wide Applications】The flat straight bracket can be used in a variety of furniture and hardware accessories, perfect for fastening chair, table, window, furniture, dresser, shelf, drawer, etc.
【Countersunk Screw】Screw holes are countersunk design.
The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance.
【Package Include】12 Pcs black connector joining bracket, meet your daily requirements to make furniture parts stay firm.

Check Stock

Thokko Zinc Coated Coarse Thread Countersunk Phillips Heavy Duty Wood/Self Drilling Drywall Screws with Bugle Head (#7 x 3/4 in, 150)

150-PACK OF ZINC-COATED WOOD/DRYWALL SCREWS (COUNTERSUNK PHILLIPS-DRIVE HEAD) - This popular pack of 3.8mm x 20mm wood screws are the first choice of professional tradesmen and keen DIY enthusiasts alike who are looking for a reliable high quality and effective wood screw. Zinc plated screws are designed zinc plated can improve the ability of corrosion resistance and anti resistance.
COUNTERSUNK PHILLIPS HEADS BUGLE HEAD SELF TAPPING SCREWS - Featuring the preferred countersunk Phillips head design, these wooden screws are fast to grip and enter the wood at your chosen point and screw in quickly and securely, offering a superbly strong hold with all types of wood..
MADE FROM COMMERCIAL GRADE STEEL - Manufactured to the very highest standards using the latest machinery to ensure a premium top-grade Zinc-coated steel screw that is strong, durable, long-lasting, and reliable..
SUITABLE FOR A WIDE RANGE OF USES - The quality of these 150pc wood screws makes them perfectly suited to a variety of applications, most commonly for securing small battens, plinths, frames, furniture, drywall etc. and also for general woodworking and DIY projects..
GREAT VALUE PACK OF POPULAR-SIZE #7 x 3/4 in (3.8 x 20mm) SCREWS - Offering exceptional value for money and the very be....

Check Stock

cSeao 110pcs Stainless Steel Finishing Cup Countersunk Washers Assortment Kit, 6#/ 8#/ 10#/ 12#

Used for RC Airplanes Boats Cars FPV Helicopters.

Check Stock

H&H M2 Countersunk Washers,Aluminium Alloy,PK20,Wine Red

20 pcs Drone Countersunk Cup for M3 screw.
M3 Special countersunk washer for your DIY Drone, make your FPV frame more unique and popular.

Check Stock