Top Countersunk Mounting Bolt Reviews

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
Four mounting slots for proper fit and alignment of closet bolts to the toilet.

Check Stock

MIKEDE Strong Magnets with Hole, 100lb + Heavy Duty Neodymium Cup Magnets with Stainless Screw for Wall Mounting, Rare Earth Magnets Round Base Cup Magnets, 1.26'D x 0.2'H, Pack of 6

【Powerful Magnetic Force】- Our round base cup magnets are made of rare earth neodymium metal material, which makes their magnetism very strong. Each magnet is 1.26 inch (32mm) in DIAMETER and 0.24 inch (6mm) in HEIGHT. PULL FORCE: 100 LBS+ (Vertical).
【More Durable than Others】- These countersunk magnets with hole are made of NdFeB material with a nickel-plated coat for maximum durability and protection against corrosion. Steel cups protects magnets from breaking which greatly increase the longevity of the rare earth cup magnets.
【Easy to Install】- These countersunk hole magnetic discs for easy use with 6 screw(Included), which makes you able to use them in two different ways. You can not only use these industrial magnets on metallic items, also on non-metallic items. The neodymium cup magnets with countersunk center hole that is perfect for mounting with a flat head screw or bolt.
【Useful Magnetic Tools】- These strong industrial cup magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. The heavy duty neodymium cup magnets will hold up some of your heavier hand tools quite well and very easily. Perfect for organizing and hanging in workshop, and decluttering your home, garage, busin....

Check Stock

uxcell M3 x 10mm Metric Hex Socket Countersunk Flat Head Screw Bolts 100PCS

Package Content: 100(+/-2%) x Countersunk Bolts.

Check Stock

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..

Check Stock

TOUHIA 50pcs #8 Finishing Washers Stainless Steel Cup Countersunk Washer

Package Content: 50pcs x Finishing Cup Washers.
Finish Washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance.
Countersunk washer can prevent a nut, bolt or screw from pulling through the material. Commonly used in automotive, pipe, and other electrical applicance.
Material: These finish washers are 100% Stainless Steel, corrosion resistant and rust resistant, can be used for a long time.
Risk Free Shopping: TOUHIA offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.

Check Stock

POWERTEC 71520-P2 36-Inch Miter Gauge Jig & Fixture Bar for any Standard 3/4" x 3/8" Miter Slot/Crosscut Sled, Woodworking, Router Table, Band Saw, Table Saw, 2PK

INCLUDES: (2) Jig and Fixture Bar with a set of 10-32 nylon adjustment screws (mounting hardware).
APPLICATION: A necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw.
FUNCTIONAL DESIGN: Features 7 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 9 tapped holes (10/32”) on the side – All holes are clean and burr free.
VERSATILITY: The top mounting holes are 5” on center, while the side mounting holes are 4” on center – providing you with a host of mounting options.
QUALITY BUILD: This miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability.

Check Stock

POWERTEC 71144-P2 30-Inch Miter Gauge Jig & Fixture Bar for any Standard 3/4" x 3/8" Miter Slot/ Crosscut Sled, Woodworking, Router Table, Band Saw, Table Saw, 2PK

INCLUDES: (2) Jig and Fixture Bar with a set of 10-32 nylon adjustment screws (mounting hardware).
APPLICATION: A necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw.
FUNCTIONAL DESIGN: Features 6 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 8 tapped holes (10/32”) on the side – All holes are clean and burr free.
VERSATILITY: The top mounting holes are 5” on center, while the side mounting holes are 3-3/4” on center – providing you with a host of mounting options.
QUALITY BUILD: This miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability.

Check Stock

POWERTEC 71518-P2 18-Inch Miter Gauge Jig & Fixture Bar for for any Standard 3/4" x 3/8" Miter Slot/Crosscut Sled, Woodworking, Router Table, Band Saw, Table Saw, 2PK

INCLUDES: (2) Jig and Fixture Bar with a set of 10-32 nylon adjustment screws (mounting hardware).
APPLICATION: A necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw.
FUNCTIONAL DESIGN: Features 6 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 6 tapped holes (10/32") on the side – All holes are clean and burr free.
VERSATILITY: The top mounting holes are 3" on center, while the side mounting holes are 3” on center - providing you with a host of mounting options.
QUALITY BUILD: This miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability.

Check Stock

Guolarizi Handedness Right 304 Off Stainless Polished Hinge Steel Lift Home Textiles (Sliver)

【Stainless Steel Piano Hinges】The Piano hinge is Composed of extremely durable 304 Stainless Steel with polished surface, rust proof, durable and prevents misalignment..
【4PCS 16" Piano Hinge】Package Include 4pcs 16in continuous hinge, It includes screws, and there are 2 in. spacings between each screw hole. Each knuckle of continuous hinge is a load-bearing point, providing uniform strength and smooth pivot action.
【Easy to Cut】This 1-3/16 in. x 16 in. continuous hinge can be cut to the length needed for your project and it is ideal for folding tables, cabinets, tool sheds, chests and cabinets..
【Countersunk Mounting Holes】16 inch hinges with holes have countersunk mounting holes to aid surface-mounting to door or frame. They provide more stability than traditional hinges, making them ideal for heavier doors and lids that require extra support..
【Heavy Duty Conceal Box Hinges】The piano hinges offer continuous supports along the entire length of the door and lid for durability. Continuous hinges are ideal for various doors, cabinet, tool box, wooden box, gift box..

Check Stock

6 PCS Piano Hinge for Cabinet, 6 Inch Black Stainless Steel Continuous Folding Hinges with Mounting Screws, for Doors, Cabinets, Window

Black Piano Hinge: Black piano hinges are made of stainless steel, surface has a matte black coating,rust-proof and durable, Stainless steel piano hinge are more durable than zinc and other steel hinges..
Heavy Duty Piano Hinge Design: All holes are designed countersunk heads, easy to operate and screws are easy to fix.
each joint of the hinge is a bearing point, providing uniform and smooth pivot action..
6”Piano Hinges with Holes: Have countersunk mounting holes to facilitate mounting to doors or frames, stability than traditional hinges, ideal for doors or boxes, etc, that require extra support..
Piano Hinges Package: Package includes 6pcs 6" long black piano cabinet hinges, 6 x 1.2inch/150 x 30mm, Thickness 0.04inch/1mm, with mounting screws..
Wide Application Piano Hinge: These piano hinges can provide support for doors or cabinets etc, also can used in woodworking projects, RV projects and other DIY applications such as folding tables or box etc..

Check Stock

2PCS Piano Hinge 16 Inch, Stainless Steel Continuous & Piano Hinge Heavy Duty Piano Hinges, 0.04\ Leaf Thickness, 0.5\ Knuckle Length, Screw Included

【Stainless Steel Piano Hinges】The Piano hinge is Composed of extremely durable 304 Stainless Steel with polished surface, rust proof, durable and prevents misalignment..
【2PCS 16" Piano Hinge】Package Include 2pcs 16in continuous hinge, It includes screws, and there are 2 in. spacings between each screw hole. Each knuckle of continuous hinge is a load-bearing point, providing uniform strength and smooth pivot action.
【Easy to Cut】This 1-3/16 in. x 16 in. continuous hinge can be cut to the length needed for your project and it is ideal for folding tables, cabinets, tool sheds, chests and cabinets..
【Countersunk Mounting Holes】16 inch hinges with holes have countersunk mounting holes to aid surface-mounting to door or frame. They provide more stability than traditional hinges, making them ideal for heavier doors and lids that require extra support..
【Heavy Duty Conceal Box Hinges】The piano hinges offer continuous supports along the entire length of the door and lid for durability. Continuous hinges are ideal for various doors, cabinet, tool box, wooden box, gift box..

Check Stock

4PCS 12 Inch Piano Hinge Stainless Steel Continuous & Piano Hinge Heavy Duty Piano Hinges, 0.04\ Leaf Thickness, 0.5\ Knuckle Length, Screw Included

【Stainless Steel Piano Hinges】The Piano hinge is Composed of extremely durable 304 Stainless Steel with polished surface, rust proof, durable and prevents misalignment..
【4PCS 12" Piano Hinge】Package Include 4pcs 12in continuous hinge, It includes screws, and there are 2 in. spacings between each screw hole. Each knuckle of continuous hinge is a load-bearing point, providing uniform strength and smooth pivot action.
【Easy to Cut】This 1-3/16 in. x 12 in. continuous hinge can be cut to the length needed for your project and it is ideal for folding tables, cabinets, tool sheds, chests and cabinets..
【Countersunk Mounting Holes】12 inch hinges with holes have countersunk mounting holes to aid surface-mounting to door or frame. They provide more stability than traditional hinges, making them ideal for heavier doors and lids that require extra support..
【Heavy Duty Conceal Box Hinges】The piano hinges offer continuous supports along the entire length of the door and lid for durability. Continuous hinges are ideal for various doors, cabinet, tool box, wooden box, gift box..

Check Stock

OEMTOOLS 26691 Nut Bolt Thread Gauge, Green Thread Checker and Bolt Size Gauge, Bolt Sizer with Thread Gauge, SAE and Metric Thread Gauge Reference

Five-Trick Pony: Measure hex nuts, washers, regular and countersunk bolts, and gauge fastener thread counts in one fell swoop with this bolt and nut sizer.
Find It Fast: Identify the size of a hex nut or washer in a snap using gauge holes cut into the thread guide for nuts and bolts.
Identify Stray Fasteners: This nut and bolt thread checker will save time and prevent stress by confirming your hardware size every time with its multiple measuring systems.
Knowledge is Power: The bolt gauge anticipates any measurement needed for both SAE and metric units.
The reverse side is embossed with thread gauges to identify bit thread counts.
Product Details: Bolt sizing gauge measures 8-3/4” x 3-3/8”.
Resistant to water, alcohol, oil, and grease-related damage.
Printed measurements are easy to read and fade-resistant.

Check Stock