Top Counter Depth Refrigerators Reviews

Bstinay Refrigerator Garage Heater Kit Replacement for AP3722172 5303918301

  • Replacement for Electrolux, Replacement for frigidaire, Replacement for kelvinator, Replacement for Gibson.
  • Replaceable part numbers: 5303918301, 1037646, Replacement for AH900213, Replacement for EA900213, Replacement for PS900213, Replacement for LP15815,....
  • Compatible Models: Replacement for FFH1767GW, Replacement for FRS3HR5HW, Replacement for FRS3R5EMB, Replacement for FRS6HR5HW, Replacement for....
  • This kit is designed for overhead freezer refrigerators (manufactured after 2001) placed in garages or basements, where refrigerator temperatures are....
  • Note: This heater does not apply to: refrigerators manufactured before 2001, and side-by-side, reverse-depth refrigerators and models with electronic....
Check Stock

Bulbmaster 4 Pack 40A15/CL - 40 Watts A15 Incandescent Oven Refrigerator Bulb High Temperature Resistant Appliance Bulb - Clear Finish - Standard Household Medium (E26) Base

  • BULBMASTER BRAND 4 Pack 40A15 is a 40 Watts A15 Light bulb. This bulbs is ideally used in most Household Appliances like Microwaves, Over the counter range hood, Stove-top light, Ovens and Refrigerators. High Temp Resistance - Able to withstand high temperatures. Rated at 1500 hours, reduce bulbs replacing frequency..
  • APPLIANCE BULB- Ideal Replacement for most Household Appliances like Microwaves, Over the counter range hood, Stove-top light, Ovens and Refrigerators.
  • IDEAL OVEN BULB - High Temp Resistance - Able to withstand high temperatures..
  • BASE: Medium Screw E26 - DIMMABLE - 1500 life Hours.
  • GREAT QUALITY - Works with most 110, 120 and 130 Volt Lighting Fixtures and Appliances.
Check Stock

Fishing Line Counter, Fishing Line Depth Finder Counter Portable Fishing Tool Tackle Display Length Gauge Tackle Tool 0-999M, Accurate Manual Meter Gear for fishing line counter spooling and Trolling

  • 【FISH IN THE RIGHT DEPTH】: With this line counter, depth measurements up to 999m are possible. This means that schools of fish that are very deep can still be easily tracked and the bait can be optimally presented at that depth in the subsequent fishing session..
  • 【ROBUST & DURABLE】: This practical meter counter for boat fishing is on the one hand salt water resistant and on the other hand packed in a robust housing. The housing is also impact-resistant and can therefore withstand rough sea conditions..
  • 【ACCURATE READING】: Fishing line counter for spooling can accurate to 999m with minimal line slippage. Each foot of fishing line is measured as it passes through the counter. 3-digit depth window shows reading in meters..
  • 【FASTENING SYSTEM】: Thanks to the quick release on the back, the Fishing line knife can be quickly and easily attached to the rod and removed again just as quickly. It can be attached to a different rod at any time..
  • 【BEST FISHING PROPS】: It can be used for squid fishing, boat fishing, etc. When the fishing is fixed, the counter can accurately grasp the fish layer. Whether it is the fishing line on the line or the length of the line when fishing, it is a very easy to use fishing equipment..
Check Stock

SEI Furniture Landrine Water Hyacinth Counter Stools, Natural/Black, Set of 2

  • FITS STANDARD COUNTER TOPS: The seagrass counter stool fits standard (Counter Height) Counter Tops 34-36” Tall.
  • HAND WOVEN: Hand-woven with high quality Seagrass and Abaca plant fibers wrapped around a solid mahogany wood frame. ***Colors may vary slightly due to use of natural seagrass fibers***.
  • COMFORTABLE: Features a comfortable, reinforced foam-padded seat. Sealed with a double coat of clear lacquer for moisture resistance. Sturdy crossbars double as footrests. ATTENTION: Chair padding seat arrives firm, but will become softer after use.
  • FULLY ASSEMBLED: The counter stool comes fully assembled and ready to use upon arrival.
  • WOOD COLOR: Dark Brown, OVERALL DIMENSIONS: 17.5” Width x 19.5” Depth x 38.75” Height.
  • SEAT DIMENSIONS: 17.5” Width x 15.5” Depth x 26” Height. ***PLEASE NOTE: Customer will be responsible for return shipping for any reason outside of a manufacturer defect***.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

210mm Heavy Duty Glass Desiccator w/Porcelain Drying Plate

  • Features maximize use inside refrigerators.
  • can also be used at room temperature anywhere in the lab.
  • Extra-long depth and pull-out shelves allow full use of refrigerator shelf depth.
  • Door opens from top down allowing trouble-free access to desiccator contents.
  • includes a locking latch that can be operated with one hand.
  • Door security loops can be secured with tamper-evident tags.
  • Wide rubber feet prevent the cabinet from sliding even on wire refrigerator racks.
Check Stock

KoolMore RIR-3D-GD Commercial Refrigerator Triple Door Stainless Steel

  • 【Quality Warranty】Our products are all certified in the United States, we provide 24 hours / 7 days Customer Service and 1-year prompt responses....
  • 【21 Cu. Ft Capacity】The interior and exterior of the undercounter refrigerator are both designed with heavy-duty reinforced 430 stainless steel,....
  • 【1/5 hp Refrigeration System】The under counter refrigerators circulate environmentally-friendly R290 refrigerant to maintain temperatures from 33....
  • 【Adjustable Shelves and Casters】The unit is equipped 3 adjustable epoxy-coated steel shelves and (4) 5" heavy-duty casters. The shelves not only....
  • 【Designed for Storage】Because of it's under counter design, the unit adds refrigerated storage to store foods and ingredients without requiring....
Check Stock

40-Watt Appliance Bulb Appliance Light Bulb 40w A15 120v 40w Refrigerator Bulb Clear Ceiling Fan Bulbs Medium E26 Standard Household Base Crystal Clear 12Packs

  • Base: Medium Screw (E26) * Bulb Type: A15 * Watts: 40, Works with most 120-Volt lighting fixtures.
  • Appliance Bulb - Ideally used in Ovens, Refrigerators, Fans and other household appliances.
  • Ceiling Fan Bulbs Medium (E26) Standard Household Base Crystal Clear, 24Packs.
  • Using the 40-Watt incandescent lamp provides about 1500-hours of rated running life, replace your bulbs less often.
  • Ideal Replacement for most Household Appliances like Microwaves, Over the counter range hood,Stove-top light, Ovens and Refrigerators.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

FixtureDisplays® 6-Tiered 18\ Tabletop Wire Display Rack for Brochures and Pamphlets, 2.5\ Open Shelves, with Header - Black 119352

  • Open design is for easy placement. Perfect for displaying brochures and pamphlets This counter top display boosts POP sales! The tabletop holder, also known as a merchandise stand, stimulates impulse sales! This inexpensive metal stand has 6 deep 2-1/2" compartments. These versatile wire stands hold CD's, DVDs, books, brochures, magazines or other products..
  • This space saving rack is also portable. Counter top rack products, also known as table top racks, are useful in grocery stores, gift shops and other retail settings. This counter top display is lightweight and made of durable gloss black wire. There is a black sign channel plate attached at stand bottom for company names, logos or printed messages..
  • This sign plate slot fits 18"w x 2-1/2"h printed material. We do not include a printed message for sign channels. Specifications: Overall Width x Height x Depth: 18.4" x 31.2" x 19.3".
  • Pocket Width x Height x Depth: 18.0" x 5.5" x 2.5".
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

Lifetime Appliance 240535201 Door Bar Rack Compatible with Frigidaire or Kenmore Refrigerator

  • ✅ Part Numbers: 240535201, AP3214686, 948957, AH734991, EA734991, PS734991.
  • ✅ Ultra Durable, non-OEM Replacement Door Bar Rack Compatible with Frigidaire or Kenmore Refrigerator.
  • ✅ Note: Height of Guard: 1-3/4", Entire Length: 23-1/8", Length between Hooks: 21-1/2", Height: 3-1/8", Depth: 5-7/8".
  • ✅ *** PLEASE READ ***: Please do not confuse with 240534901 which has a depth of 4-1/2", or 240534701 which has a length of 24-3/4", or 240338001....
  • ✅ Please note refrigerators require only 1 of this bin (middle rack). The top and bottom racks are 240535101. If the top rack is shorter, then the....
Check Stock

Furniture of America Morley 6-Piece Pub Dining Set Black

  • Modern style inspired counter-height dining set.
  • Triangular table top on bold block legs, padded leatherette swivel chairs and bench.
  • Finished in black for sleek appeal, set includes one (1) counter-height table, one (1) counter-height chair, and four (4) counter-height chairs.
  • Materials: solid wood, wood veneers, leatherette, cal-foam padding.
  • chair dimensions: 35.75"h X 15.75"w X 19.75"d.
Check Stock