Top Corrugated Stainless Steel Gas Pipe Reviews

EZ-Fluid 24" Stainless Steel Corrugated Yellow Epoxy Coated 1/2" MIP x 1/2" FIP Gas Flex,Flexible Natural Gas Connector Hose Supply Line For Gas Pipe,Hot Water Heater,Range,Dryer,Stove(1 Pack)

  • EZ-Fluid Stainless Steel Corrugated Flexible Natural Gas Hose Connector Suppy Line Has Yellow coated polymer exterior for extra protection and flexibility.
  • EZ-Fluid 3/8" FIP or 1/2" MIP x 1/2" FIP Stainless Steel Corrugated Yellow Epoxy Coated Gas Flex,Flexible Natural Gas Connector Hose Supply Line. CSA certified and ideal for indoor and outdoor use.
  • Comes with MIP and FIP flare fittings. Fits on 1/2" FIP Gas valve or 1/2" Flare x 1/2" FIP Gas Valve,Male end Flare Fitting come with 1/2" NPT outter Thread and 3/8" NPT inner Thread..
  • Application For residential/commercial tank and Gas tankless ,Hot water Gas heater, boiler, fryer, stove,Dryer,Range,Gas Pipe ,Fire pit ,Grill and more.
  • The corrosion-resistant yellow coating protects the product from exposure from harsh weather and certain chemicals.
Check Stock

Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel

  • SIZE- Length 24 inch flexible yellow coated 304 stainless steel gas connector hose, flexible gas hose supply gas line connector adapter:2 pack 3/4 Inch FIP, 2 pack 3/4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
  • HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • It has good air tightness, durability, rust and corrosion resistance..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
  • EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
Check Stock

Gas Connector Kit 24 inch Yellow Coated Stainless Steel, 3/8” OD Flexible Gas Hose Connector for Gas Log and Space Heater, 1/2" FIP x 3/8" MIP Stainless Steel Fittings, 24” Gas Appliance Supply Line

  • ... HEATER AND GAS LOG. This stainless steel gas line hose has a 40,000 BTU capacity, designed as a gas connector for space heaters/gas logs. 24 in. long with a 3/8” outer diameter and 1/4” inner diameter. Includes a 1/2" FIP x 3/8" MIP stainless steel fitting..
  • CORRUGATED DESIGN FOR FULL FLEXIBILITY. A corrugated gas appliance gas connector offers maximum flexibility, as the corrugated design makes for a flexible gas hose by allowing to bend and snake the yellow coated gas line connector into small spaces, bends, and corners..
  • REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds..
  • EASY INSTALLMENT: No special tools required to install this gas connector. Includes stainless steel corrosion-resistant fittings with threaded end connections which easily connect to your gas supply line, and create a secure, leak-free seal..
Check Stock

Appliance Pros Flexible Stainless Steel Gas Line for Dryer Gas Hose Connector Kit Comes with 1/2 OD 1/2 MIP x 1/2 FIP Stainless Steel GASLINE72

  • GAS DRYER INTENDED - A stainless steel gas line hose designed mainly for gas dryers. It measures 72" and has an inner dimension of 3/8". Other....
  • CORRUGATED DESIGN - Achieve full flexibility, because, with this corrugated gas appliance connector, lets you snake it into small spaces including....
  • PREMIUM QUALITY - A corrugated stainless steel gas dryer hose that has compression fitting to create a secure metal connection for heavy-duty use.....
  • CONVENIENT INSTALL - No tools required to install the piping. It features male and female iron pipes for easy connections. Just make sure your sizing....
  • ONE YEAR WARRANTY - With no compromise to quality, we provide premium durable products for the long-term, which is a seal to ultimate safety. This....
Check Stock

Stanbroil 3/8 X 36 Non-Whistle Flexible Flex Gas Line Connector Kit for NG or LP Fire Pit and Fireplace

  • Easy to installation and use, highly durable, Corrugated flexible flex gas line with feature of high temperature resistance.
  • 3/8" OD x 1/4" ID 36 inch Stainless steel pipe coated black gas line with fittings.
  • 3/8" Male Flare x 1/2" Male NPT fitting end, 3/8" Male Flare x 1/2" Female NPT Fitting. Brass 90 degree fitting for customer connection convenience.
  • CSA certified, fit for NG or LP fireplaces and .
  • There is a staggered pitch every 2" to Eliminate Whistling.
Check Stock

Puxyblue 48 Inche Gas Hose Connector Kit for Dryer,Flexible Stainless Steel Gas Line Come with 1/2 OD 1/2 MIP x 1/2 FIP

  • Made for Gas Dryers: Flexible Stainless Steel Gas Line that's mainly designed for gas dryers.It measures 48 inches and come with 1/2" OD 1/2" MIP x....
  • Corrugated Design: The stainless steel gas pipeline hose adopts a corrugated design, which can be installed and meandered into small spaces including....
  • Premium quality:The product is made of high-quality, sturdy and durable stainless steel material, which is not easy to damage and it can help prolong....
  • Easy to Install: Fixing it yourself is simple and cost-effective.No need for more connectors. Only one wrench and a little bit teflon tape are all you....
  • Dispel your Concerns: If you are not satisfied with the product for any reason, you may request a replacement or a full refund. If you are not sure if....
Check Stock

Stanbroil 3/8\ X 12\ Non-Whistle Flexible Flex Gas Line Connector Kit for NG or LP Fire Pit and Fireplace

  • Easy to installation and use, highly durable, Corrugated flexible flex gas line with feature of high temperature resistance.
  • 3/8" OD x 1/4" ID 12 inch Stainless steel pipe coated black gas line with fittings.
  • 3/8" Male Flare x 1/2" Male NPT fitting end, 3/8" Male Flare x 1/2" Female NPT Fitting. Brass 90 degree fitting for customer connection convenience.
  • CSA certified, fit for NG or LP fireplaces and 003c90K BTU with a 3/8" Connection Hub fire pit and fireplace burners.
  • There is a staggered pitch every 2" to Eliminate Whistling.
Check Stock

Plumb Shop Brasscraft CSSL54-24P Stainless Steel Gas Dryer Connector, 24-Inch

  • Flexible stainless steel corrugated tubing with stainless fittings.
  • A.G.A. Approved for indoor or outdoor use according to ANSI Z21.24 and Z21.45. 1/2" Male I.P.S. X 1/2" Female I.P.S. Fittings.
  • Corrugated flexible Stainless Steel gas dryer connector.
  • Polymer coated, 1/2-Inch inside diameter, 5/8-Inch outside diameter, tube with fittings.
Check Stock

Puxyblue 72 Inche Gas Hose Connector Kit for Dryer,Flexible Stainless Steel Gas Line Come with 1/2' OD 1/2' MIP x 1/2' FIP

  • Made for Gas Dryers: Flexible Stainless Steel Gas Line that's mainly designed for gas dryers.It measures 72 inches and come with 1/2" OD 1/2" MIP x 1/2" FIP..
  • Corrugated Design: The stainless steel gas pipeline hose adopts a corrugated design, which can be installed and meandered into small spaces including corners and bends. The bright yellow outer skin also improves the recognition..
  • Premium quality:The product is made of high-quality, sturdy and durable stainless steel material, which is not easy to damage and it can help prolong the life of your dryers..
  • Easy to Install: Fixing it yourself is simple and cost-effective.No need for more connectors. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • Dispel your Concerns: If you are not satisfied with the product for any reason, you may request a replacement or a full refund. If you are not sure if this replacement part is right for your appliance, please feel free to contact us or ask a question through Amazon, it would be our pleasure to serve you!.
Check Stock

HNHYNSY 1/8\ 1/4\ 3/8\ 1/2\ Female x Male Thread 90 Deg Brass Elbow Pipe Fitting Connector Coupler for Water Fuel Copper (Thread Specification : 1\)

  • Generally speaking, the raw material stainless steel is generally non-magnetic. However, due to a series of processes such as processing, smelting, and heat treatment, a small amount of martensite or ferrite structure will appear in austenitic 304 stainless steel. Therefore, 304 stainless steel will have weak magnetic properties..
  • This product is made of 304 stainless steel, which is hard and not afraid of high temperature and low temperature, which effectively prevents the phenomenon of pipe joints from cracking..
  • Built-in screw cap reinforcement to make the connection between the water pipe and the elbow more stable and not easy to break.
  • The inner wall of the water pipe is smooth, and the sealing is strong, which strengthens the stability of drainage and exhaust, and the resistance is reduced, the faster the conveying.
  • Suitable for water pipe transfer, natural gas gas transfer, sewage treatment water pipe transfer.
Check Stock

EXCELFU Safety-Shield Gas Appliance Line Flexible Dryer Gas Hose Connector Kit - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

  • Adapter Included 2 Pcs 5/8 In.OD Flare x 1/2 In. MIP (Tapped 3/8 In. FIP) and 2 Pcs 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
  • This gas appliance connector kit are designed for Ranges, Stoves, Furnaces or Boilers.
  • 304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
  • 48 inch long stainless steel corrugated gas range and dryer connector kit are perfect for indoor or outdoor use.
  • This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
Check Stock

Pipe Cutter, Tubing Cutter Tool 1/8\ to 1-1/8\ Outer Diameter, Copper Pipe Cutter, Mini Tube Cutter for Thin Metal and PVC Pipe, Pipe Cutter Tool for Copper, Aluminum, Thin Stainless Steel Pipe

  • High hardness blade: The blade of this pipe cutter is made of high-strength manganese steel, which can cut metal thin tubes, and it is equipped with a standby blade..
  • Wide Application：The copper pipe cutter can be used to cut copper pipe, aluminum pipe,galvanized pipe,corrugated tube,PVC and thin stainless steel tube..
  • Reasonable Design：The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • Sturdy and durable:The metal cutter tool is made of stainless steel except for the rotating handle made of plastic to ensure its durability..
  • Including deburring tools:There is a deburring tool attached with the pipe cutter tool, made of sturdy steel. It can deliver quick, clean and easy inside diameter reaming of different tubes..
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • 「WHAT YOU WILL GET」- The gas hose connector kit mainly includes a 24in gas hose, 2 pc 15/ 16 -16 UN x 3/4'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused f....
Check Stock