Top Core Bit Segment Reviews

Stadea CBD106N Diamond Concrete Hole Saw 5 Inch Core Drill Bit For Concrete Brick Block Stone Masonry, Laser Welded Wet Dry 1 1/4-7 Thread

  • 5 Inch Diamond Concrete Core Drill Bit Hole Saw, 17 Inch Tall Designed for drilling hard Concrete, Rebar, masonry, hard brick, Granite, and other hard materials.
  • Laser Welded Diamond Segments for extra joint strength needed to cut hard concrete and other hard materials effectively.
  • 17″ High tube length, with 1 1/4″-7 arbor, Fit known brand core drill rigs.
  • Designed to cut either in wet or dry use, for longer life span use wet.
  • 10 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 4 MM thick and 24 MM wide.
Check Stock

Stadea CBD113N 3 Inch Concrete Hole Saw Core Diamond Drill Bit 3 Inch For Concrete Brick Block Stone Masonry Laser Welded Wet Dry 1 1/4-7 Thread

  • 3 Inch Diamond Concrete Core Drill Bit Hole Saw, 14 Inch high Designed for drilling hard Concrete, Rebar, masonry, hard brick, Granite, and other hard....
  • Laser Welded Diamond Segments for extra joint strength needed to cut hard concrete and other hard materials effectively.
  • 14" High tube length, with 1 1/4"-7 arbor, Fit known brand core drill rigs.
  • Designed to cut either in wet or dry use, for longer life span use wet.
  • 7 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 3.5 MM thick and 24 MM wide.
Check Stock

Delta Diamond Boss Hog Tuckpointing Mortar Raking Diamond Glitter Bit 4-5/8-inch Length X 1/4" Shank for Mortar Removal

  • MORTAR REMOVAL - Ideal for intricate and delicate mortar removal where a diamond blade wouldn’t fit or be too difficult to use..
  • VACUUM BRAZED - Made with premium super-abrasive vacuum brazed diamond, this bit will grind faster, last longer and cost you less than any comparable tool..
  • SPECIFICATIONS - 4-5/8" long X 1/4" shank fits on most drills. Use on a regular drill. Do not use a impact drill. Allow the bit to do the work, do not apply too much pressure, and allow bit to cool down during use to prevent bending or breaking..
  • LIFETIME WARRANTY + FREE RETURN SHIPPING - All Delta Diamond Products, Inc. diamond blades, coring bits, hole saws and cup wheels feature a lifetime limited warranty against warping, cracking and/or material defects. If any diamond tool (being used for its intended purpose with at least 50% of the wear remaining) fails to perform properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool will be replaced at no charge..
Check Stock

Cougar HD Supreme Wet Concrete Diamond Core Drill Bit 13″ Diameter X 1-1/4″-7 Threaded Arbor for Drilling Reinforced Concrete with Rebar, Hard Concrete, Granite, Brick, Block, & More (13-inch)

  • Use Cougar HD Supreme wet diamond bits for drilling cured concrete with light to medium steel reinforcing. Heat-treated steel core barrels are designed to withstand the demands of high pressure..
  • The pointed segments reduce drag and penetrate quickly. The result is faster, straighter holes and higher productivity. Also great for drilling brick, block and various stone materials..
  • Use with all wet rig-mounted core drilling machines..
  • Specs are 13″ Diameter X 15″ barrel length x 1-1/4″-7 Threaded Arbor. 15″ barrel length, 17″ overall length (arbor + barrel)..
  • This concrete diamond core bit is US made and has a lifetime warranty with free return shipping. If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!.
Check Stock

6-1/2" Dry/Wet Multipurpose Core Bit for Masonry, Concrete and Natural Stone, 6" Drilling Depth, 1/2" Shank Pilot Bit with 5/8"-11 Arbor

  • DRY DRILLING - designed for brick, block, pavers or natural stones with Moh's hardness below 4.
  • WET DRILLING - designed for concrete (non-reinforced) or natural stones with Moh's hardness below 7.
  • PILOT BIT ADAPTER - includes 1/2" chuck pilot bit adapter.
Check Stock

Stadea CBW112H 4 Inch Diamond Concrete Masonry Hole Saw Core Bit For Concrete Masonry Brick Block Cutting Wet 5/8 -11 Threaded 14 High

  • 4 Inch Diamond Concrete Core Drill Bit Hole Saw, 14 Inch long Designed for drilling Concrete, masonry, brick, stone, and other soft to medium hard....
  • High Frequency Welded Diamond Segments for joint strength needed to cut concrete and other soft to medium hard materials effectively.
  • 14" High tube length, with 5/8"-11 arbor.
  • Designed to cut in wet, for longer life span use wet.
  • 9 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 4 MM thick and 24 MM wide.
Check Stock

Concord Blades CBN045A10CP 4.5' Granite and Marble Narrow-Turbo Wave Diamond Blade for cutting granite, marble and stone.

  • 10mm Segment Height, 0. 090" Segment Width, 7/8"-20mm-5/8" Arbor with Double Bushing and 4 Flush Mount Holes.
  • Super Fast Cut with Minimum Chipping, even on dry cut.
  • Use on Angle Grinder, Wet Stone Saw or Circular Saw.
  • Specially designed wave-core provides core strength, wobble control and carries away debris..
Check Stock

16\ Laser Welded Diamond Saw Blade for Concrete, Brick, Block and Masonry, Heat Treated Blade Core, Dry or Wet, 1\ Arbor

  • MULTIPURPOSE - 16" laser welded diamond saw blades designed to cut concrete, reinforced concrete, brick, block, and other masonry.
  • PREMIUM DURABILITY - heat treated blade core reduces vibrations and core elasticity, so the blade body is rigid and cutting is smooth.
  • SHARP SEGMENTED TEETH - laser welded segments improves user safety (0.125" segment width) and drastically reducing the chance of segment breakage.
  • HIGH PERFORMANCE - superior bonding formula improves cutting speed against baseline diamond blades.
  • ARBOR SIZE & IDEAL RPM - 1" arbor & 2200 RPM.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

10\ Laser Welded Diamond Saw Blade for Concrete, Brick, Block and Masonry, Heat Treated Blade Core, Dry or Wet, DM 7/8\ Arbor

  • MULTIPURPOSE - 10" laser welded diamond saw blades designed to cut concrete, reinforced concrete, brick, block, and other masonry.
  • PREMIUM DURABILITY - heat treated blade core reduces vibrations and core elasticity, so the blade body is rigid and cutting is smooth.
  • SHARP SEGMENTED TEETH - laser welded segments improves user safety (0.100" segment width) and drastically reducing the chance of segment breakage.
  • HIGH PERFORMANCE - superior bonding formula improves cutting speed against baseline diamond blades.
  • ARBOR SIZE & IDEAL RPM - 7/8"-5/8" arbor & 3600 RPM.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

8 Oz Attack Epoxy Adhesive Removal Solvent for Metals Stones Glass Wood Glue Removing Residue Dissolving Jewelry Cleaning Solution

  • RCD Technology - Reinforced Compound Diamond Technology, a new concept and invented technology of diamond segment production. RCD segment shows excellent diamond keeping ability with high durability against impact and abrasion. Check product description for more information..
  • REMOVING - Ideal grinding cup for removing Urethane, Epoxy, Glue on concrete floor. DOUBLE diamond layer for effective removing work..
  • COMPETITIVE & ECONOMICAL - This is economical and price competitive than typical PCD grinding cups in the market..
  • RUBBER CUSHIONED CORE - The rubber cushioned sandwich core enables user-friendly use. This absorbs noise and vibration. Sandwich type : Steel + Rubber + Steel..
  • MINIMUM DAMAGE - Spike Grinding wheels minimize the damage caused to the floor, for clean and effective work..
Check Stock

MIAO JIN 4Pcs Strawberry Huller Remover Pineapple Eye Peeler Vegetable Core Remover Kitchen Gadget Remover Tool for Strawberry Potato,Carrot And Pineapple

  • RCD Technology - Reinforced Compound Diamond Technology, a new concept and invented technology of diamond segment production. RCD segment shows....
  • REMOVING - Ideal grinding cup for removing Urethane, Epoxy, Glue on concrete floor. DOUBLE diamond layer for effective removing work..
  • COMPETITIVE & ECONOMICAL - This is economical and price competitive than typical PCD grinding cups in the market..
  • RUBBER CUSHIONED CORE - The rubber cushioned sandwich core enables user-friendly use. This absorbs noise and vibration. Sandwich type : Steel + Rubber....
  • MINIMUM DAMAGE - Spike Grinding wheels minimize the damage caused to the floor, for clean and effective work..
Check Stock

VORTEX DIAMOND VCB 3 Inch Wet Concrete Diamond Core Drill Bit for Concrete Stone Granite Marble (3')

  • Vortex Diamond standard grade notched-edge segmented core bits provide excellent performance in drilling cured concrete and asphalt..
Check Stock

2\ Diamond WET Coring Bit - Concrete Core Drill by BLUEROCK Tools

  • 10 mm segment height for improved operating life..
  • For use on block, brick, concrete, and other materials..
Check Stock