Top Copper Tubing Fitting Reviews

Legris 0105 08 17 Brass Compression Tube Fitting, Connector, 8 mm Tube OD x 3/8\ BSPT Male

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to tubing on one end and has a BSPT male connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Ferrule compression fitting for a leak-resistant seal.
  • For use with copper, nylon, or plastic tubing.
Check Stock

RIDGID 10973 122XL Copper Cutting and Prep Machine, 1/2-inch to 4-inch Pipe Cutting Machine

  • Designed to cut, clean and deburr copper tubing and fittings (Types K, L and M).
  • also cuts and deburrs stainless steel tubing with a maximum wall thickness of 0.065 inches (1.65 mm).
  • Rugged cast aluminum housing and powerful 1/3 HP induction motor for long tool life.
  • convenient carry handle for easy transport.
  • Reamer removes burrs from inside of tubing and brush cleans external surface to prepare for joining.
  • machine also includes accessories to clean inside of fittings and clean burrs from outside surface.
  • Copper pipe cutter has an adjustable handle to accommodate different diameter tubes and a handy built-in 1/2-inch (12 mm) incremental scale for quick and easy measuring.
  • Includes outside diameter cleaning brush, cone reamer, outside diameter deburring disk, fitting brush kit and operator's manual pack.
Check Stock

LASCO 19-5513 Straight Ball Valve Compression Fitting with Integral Sleeve Nut, 3/8-Inch OD Tube and 3/8-Inch Female Pipe Thread, Nylon/Plastic

  • Nylon compression fitting with integral sleeve nut.
  • 3/8-inch od tube x 3/8-inch female pipe straight valve.
  • No need to disassemble fitting, just loosen the nut insert tubing, then tighten.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock

NY Brew Supply Wort Chiller w/vinyl tubing attachments 1/2 x 50 Copper

  • Vinyl Tubing and high quality brass garden hose fitting included.
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

Super Efficient 3/8\ x 25' Stainless Steel Wort Chiller

  • Perfect for the kitchen homebrewer that is making extract batches. Typically, with extract batches you boil a smaller amount of concentrated wort (1-3 gallons) and then add clean cool water before adding the yeast..
  • The compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter (not included)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • 6.75" x 3" x 14" (coil diameter x coil height x inlet height).
Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ...de of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubin....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Self Piercing Saddle Valve For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water

  • COMPLETE ICE MAKER WATER LINE KIT: Crosslinked high density polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections..
  • INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily without the hassle of shutting off the water. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The self piercing saddle valve quickly and neatly penetrates your pipe to divert the water where you want it to go..
  • LEAD FREE COPPER CONSTRUCTION allows you to safely use this saddle valve for your ice makers, humidifiers, water filters and other potable drinking water applications. The saddle valve can pierce copper pipes 3/8” to 3/4″. There is no need to turn off your water when connecting copper, CPVC or PVC tubing. The saddle valve can also be used with steel or brass pipe but requires turning off the water supply and drilling a 1/16” hole..
Check Stock

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

(Pack of 10) EFIELD Pex A Full Flow Expansion Brass Fitting 3/4'x 3/4' Elbow ONLY For Pex-A Tubing Connection, ASTM F1960, Lead Free

  • This Efield Product is Compatible with all Types of Brands of Pex A Pipe/Tubing, Uponor(Wirsbo), Sious Chief, Etc..
  • Certified to ANSI/NSF-61 and ASSE 1061 Product Standard.
  • This Efield Product is Compatible with Expanding Fitting System, NOT Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems.
  • Only for Pex A Pipe/Tubing Fitting Connection.
Check Stock

Litorange 3 Pack Metal Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter, 3/8\ Tube OD x 1/2\ NPT Male

  • ★ 【Material】: Heavy Duty Brass,strong and durable. Size: 3/8" Tube OD x 1/2" inch NPT Male Adapter..
  • ★ 【Firm And Durable】: Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability..
  • ★ 【Function】: Fitting connects to tubing on one end and has an NPT male connector on the other. Use with copper, brass, aluminum, or plastic tubing..
  • ★ 【Tips】: Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. Primary uses water, gasoline, oil and vacuum lines..
  • ★ 【Package Include】: 3 PCS 3/8" Tube OD x 1/2" NPT Male connector. Comes with 1 year warranty..
Check Stock

Cole-Parmer-3121270 Compression Ferrule and Nut Assembly, for 1/4\ OD, Brass

  • This Joywayus compression fitting is made of brass..
  • Connects to 4mm copper,brass,aluminum,or plastic tubing..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Check Stock