Top Copper Solder Reviews

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

...dering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
【Widely used Solder Remover】:The Desoldering Wick & Desoldering Pump can be used to correct mistakes with....

Check Stock

SFC TOOLS Standard Jewelry Soldering Kit with Silver Solder Wire Kit-1750

Kit Includes: Mini Butane Torch, Sparex Pickle Compound.
Handy Flux, Magnesia Soldering Block, Copper Tongs with Curved Tip,.
Silver Solder Wire - Easy, Medium and Hard,.
Tweezers - Boley Style, Third Hand w/Tweezers, Tripod with Mesh Screen,.
Eco Solder Pick, Wire Cutter (Style and PVC color may vary), Utility Flux BrushDescriptionWe put this soldering kit together with all the tools and supplies you will need to start soldering, whether you are a beginner, taking a class, or are setting up your studio. You will be able to immediately solder sterling silver, fine silver, PMC3, nickle silver, copper, brass, and bronze. These soldering tools are all you need to perform small soldering tasks for jewelry making and repairs, tasks such as balling headpins, soldering chain ends, pin backs and bails, soldering jump rings closed and so much more. We recommend starting with 16-22 gauge sheet and wire if you're a beginner. Butane is not included and will need to be purchased separately. Kit includes: SFC Tools Micro Torch - Handheld Butane Torch, Silver Solder Wire 20 gauge - 1 foot each of easy, medium, and hard, Sparex Pickle Compound - 10 oz jar, Handy Flux - 8 oz. jar, Magnesia Soldering Block, Copper Tongs, Precision Tweezer - AA Fine Tip, Third Hand with Cr....

Check Stock

No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)

...e size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
Please check the size carefully before purchasing.
Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through-hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency.

Check Stock

EASTMAN Sterling Lead Free Solder, Silver, 85325 EASX1, 1 Count (Pack of 1)

PLUMBING SOLDER: Pipe soldering is ideal for sealing, joining, coating, and filling metals.
COMPATIBILITY: Solder wire is perfect for use on brass, bronze, copper, galvanized iron, monel, steel, stainless steel and all other solderable alloys that require maximum reliability of solder joints.
VERSATILITY: Designed for safe use in potable water applications for plumbing, heating, and industrial applications.
DURABLE: The Flo Safe lead free solder metal is alloyed from pure virgin metals.
meets all state and federal specifications for Safe Drinking Water Act, and meets ASTM B-32 alloy TC specification.
MELTING POINT: Pipe solder features a maximim temperature before melting of 410 degrees.

Check Stock

Stained Glass Supplies Solder for Stained Glass Solder 1 Lb Spool and 2 Rolls Electrical Conductive Copper Tape 1/4 Inch for Paper Circuits Jewelry Repairs

...ke is normal, please use in a ventilated place.
Stable and reliable: solder plate material ratio is reasonable, uniform melting point, good fluidity, can present a regular smooth appearance. The melting temperature is 361-421 degrees Fahrenheit. Note: to ensure the welding effect, please wrap the edges of glass with copper foil first.
Good adhesive: the stained glass copper foil tape has nice adhesion to a variety of surfaces, resulting in a smooth surface, which also has an easy-to-peel backing for long-term use.
Please be careful and wear appropriate gloves during the wrapping process of glass and other material with pointed edges to avoid scratches.
DIY exquisite crafts: this set of electrical conductive tape and solder can meet various needs of glass handicraft makers.
The copper tape 1/4 inch allows you to draw fine lines and get smooth glass pieces, and soldering wire for stained glass can make your glass pieces firmly welded together, to assist you in the smooth production of delicate crafts.
Practical combinations: the combinations of copper craft supplies are not only suitable for glass crafting enthusiasts, but also can be applied for other electronic products for welding and repair work, which can withstand the different environment both indoo....

Check Stock

TOWOT Solder Wick & Desoldering Pump, 6 PCS Different Desoldering Wick & Solder Sucker-Desoldering Vacuum Pump Solder Remover

Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
7-in-1 Solder Set: 6 pcs different copper solder braid is made of copper and rosin geometrically accurate braiding when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (2.0mm,1.5m.
3.0mm,1.5m), Suction Pump Size (length: 21cm)..
High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
Value Package: 7-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.

Check Stock

TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid

Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m.
width: 2.5mm), Suction Pump Size (length: 21cm)..
High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.

Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..

Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

... size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
Please check the size carefully before purchasing.
Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and efficiency to your work.

Check Stock

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width 1.5m Length with Flux - Desoldering Vacuum Pump Solder Removal Tool

High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size.
geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs.
High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.
Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.
7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size.

Check Stock

Solder Flux (56.6 grms)| flux paste | rosin solder | electrical flux paste | solder paste no clean | flux paste for soldering | rosen flux paste | solder flux electrical | flux paste for electronics

[Enought Quantity] : This rosin solder flux comes in 1 jar of 56 grams of soldering flux..
[Non Corrosive]: This non acid flux is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
[Oxidation Resistance] : This solder flux for electronics Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump or waste..
[Strong Capability]: This rosin paste flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..

Check Stock

CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.12/0.1/0.08 Inch Width 1.5 Meter Length

☃[Package Include] You will get 3 packs No-Clean Solder Braided Wicks.
☃[Appropriate Size] Package includes 1 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick..
☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..

Check Stock

NTE Electronics SW02-10 No-Clean Solder Wick 4 Blue.098 Width 10 Length

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.
Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
Available with standard or anti-static bobbins.

Check Stock