Top Copper Connecting Tubing Reviews

LabEdit Portable Vacuum Pressure Pump with Tubing and Connectors

  • ... the laboratory filtration pump is 110-120V and the working HZ is 60HZ so It is made for USA market. (If you want to use this product in other country, please check the working voltage and working HZ to make sure whether it is suitable for the country you want to use for or not..
  • There are three different tubing for connecting to different size nozzle of Laboratory Vacuum Filtration Distillation Apparatus. The three different size hoses are one piece 4mm ID x 5mm OD hose.
  • one unit 6mm ID x 9mm OD. These three type hose could fit most of different size filter bottle nozzle..
  • The transparent tubing need to be pluged to the lab vacuum filtration and connect the black silicone tubing to the lab vacuum filtration and then turn the lab filter pump on in order to let the lab vacuum pump work.(the yellow tubing can be connected to the black tubing in order to connect to big size nozzle of laboratory vacuum filtration distillation apparatus).
  • The lab vacuum pump product is made of plastic shell,Copper wire inside part and four Shockproof rubber base etc. The plastic shell can avoid rust.copper wire inside part makes the product more durable.The shockproof rubber base can reduce noise. You can barely hear the noise when the product ....
Check Stock

Legris 0105 08 17 Brass Compression Tube Fitting, Connector, 8 mm Tube OD x 3/8\ BSPT Male

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to tubing on one end and has a BSPT male connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Ferrule compression fitting for a leak-resistant seal.
  • For use with copper, nylon, or plastic tubing.
Check Stock

Generic Copper Rooftop Exhaust Vent Cap with Damper and Bottom Extension 8 Inch

  • PERFORMANCE: This high-quality copper exhaust vent-cap is designed to be used with bathroom and kitchen exhaust venting systems.
  • SPECIFICATIONS: This vent-cap is available in four sizes. This model includes a 3” long pipe extension located underneath the flange for connecting to flex tubing..
  • DURABLE: This vent-cap is constructed using heavy 16 oz. copper and includes a damper to prevent back draft. This model also includes a screen to help keep out insects and birds..
Check Stock

Generic Copper Rooftop Exhaust Vent Cap with Damper and Bottom Extension (10 Inch)

  • PERFORMANCE: This high-quality copper exhaust vent-cap is designed to be used with bathroom and kitchen exhaust venting systems.
  • SPECIFICATIONS: This vent-cap is available in four sizes. This model includes a 3” long pipe extension located underneath the flange for connecting to flex tubing..
  • DURABLE: This vent-cap is constructed using heavy 16 oz. copper and includes a damper to prevent back draft. This model also includes a screen to help keep out insects and birds..
Check Stock

Horiznext Stainless Steel Compression Tube Fitting Union 3/8 Tube OD Straight Adapter

  • Made of stainless steel 304, heavy duty, durable and corrosion resistance..
  • Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic tubing.
  • Temperature range from -100 to +660 degrees ℉.
Check Stock

HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubin

  • HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubing.
  • This is a heavy duty steel Flaring and Swaging Tool Kit for flaring and Swaging copper tubing.With this Flaring and Swaging Tool Kit you can flare or....
  • Copper tubing flaring tool + copper tubing swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation Self centering, slip-on forged steel yoke Blow....
Check Stock

Boeray 5pcs Brass Tube Fitting, 5/16\ to 5/16\ Compression Union Fitting

  • Material:CA 360 brass,high quality, provide high resistance to abrasion and corrosion..
  • Union for connecting and disconnecting two tubes more easily than with a coupling.
  • Use with:copper, brass, aluminum, or plastic tubing.Primary uses water, gasoline, oil and vacuum lines. It is very convenient.
Check Stock

Anderson Metals 54014-04 Brass Tube Fitting, Short Flare Nut, 1/4\ Tube OD

  • Short flare nut for connecting to a tube or fitting.
  • Connects to copper, brass, aluminum, or steel tubing.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F.
  • Resists mechanical pullout for a more secure connection.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Anderson Metals-54014-05 Brass Tube Fitting, Short Flare Nut, 5/16\ Tube OD

  • Short flare nut for connecting to a tube or fitting.
  • Connects to copper, brass, aluminum, or steel tubing.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F.
  • Resists mechanical pullout for a more secure connection.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Anderson Metals Brass Tube Fitting, 90 Degree Elbow, 5/16\ x 5/16\ Flare

  • 90-degree elbow for connecting two pipes or tubes at an angle.
  • 45-degree flared construction for a stronger connection than soldered.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -65 to 250 degrees F.
  • Suitable for copper, brass, aluminum, and steel tubing.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Brass Flare Union 1/4\ OD x 1/4\ OD SAE 45 Degree Flared Tube Fitting, 5pcs

  • 1/4" x 1/4" flared union for connecting and disconnecting two pipes more easily than couplings.
  • This fitting has a 45-degree flare connection on both ends..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -65 to 250 degrees F.
  • Suitable for copper, brass, aluminum, and steel tubing.
Check Stock

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....
Check Stock

IWISS Angle PEX Crimping Tools Combo Kits for 1/2\ & 3/4\ Pex Crimp Rings with Go/No-Go Gauge with PEX Pipe Cutter Suits for All US F1807 Standards Copper Rings

  • All-in-One PEX Piping Tool Kit: IWS-1234C PEX plumbing kit is designed to make copper crimp ring and copper sleeves connections in sizes 1/2-inch to 3/4-inch. The tool set includes PEX crimping tool(1), PEX cutter(1), 1/2’’ copper crimp ring(20), 3/4’’ copper crimp ring(10)..
  • Patented Copper Crimp Ring: Annealed copper crimp rings are used to secure PEX piping to F1807 Brass or PPSU fittings. Designed for longevity and durability..
  • PEX Crimping Tool: Dual cavity plumbing PEX crimping tool for PEX Copper Crimp Rings 1/2" & 3/4". Allows for a one-handed crimp. Angle head design is useful for working overhead and in tight areas as it easily fits between joists. .
  • PEX Cutter: Shear cutter tool ideal for cutting tubing for water applications. Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. Cuts through PEX tubings like butter..
  • Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Apollo, etc.)..
Check Stock