Top Copper Base Brazing Alloys Reviews

Aufhauser SilverAlloy 56% Ag BAg-7 1/16 x 18 Flux Coated Silver Solder Brazing Rods 3 Sticks

• Fluxed coated 56% Silver brazing rods, 1/16" Core. (3 Sticks).
• For general purpose brazing of ferrous and non-ferrous alloys excluding aluminum..
• For joining and repairing of Copper, Brass, Steel, Stainless Steel and Cast Iron..
• Meets AWS A5.8 BAg-7. AMS 4763, QQB-654A Class BAg-7.

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

• 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
• 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
• 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
• 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
• crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
• 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

• Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
• Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
• Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
• Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
• brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
• U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..

20 Sticks BLUEFIRE JAgP-5 1/2 lb 5% Silver Phos Copper Brazing Alloys Welding Rods Industry BCuP-3 0.050\x1/8\x14\ equivalent to HARRIS STAY SILV 5 Professional Grade Gas Soldering Torch Accessory

• 5% Silver Bearing: USA AWS A58 Class: BCuP-3 brazing alloys rods. Contents: Silver (Ag) 4.8-5.2%.
• Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
• Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
• Best Performances: Solidus Temperature: 1189°F / 643°C, Liquidus Temperature: 1419°F / 771°C. Recommended Joint Clearance: 0.003"/0.006.

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36 x 1/8 1 Lb

• LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
• A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
• galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
• READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
• Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
• Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

• Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
• Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
• T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
• Sil-flo is not recommended for ferrous metals such as iron or steel.

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

• MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
• ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
• APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

• Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
• Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
• Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
• Centurion series regulators with Protective rubber gauge boots.
• Front valve welding handle with stainless steel ball point valves for accurate Gas control.

MARSWARE TIG Welding Tungsten Electrode 10-Pack Rod Rare Earth Blend Tri-Element Non-Radioactive 0.040 ×7 Ground Finish Arc Starts Easier and More Stable Purple EWG

• 【Premium Quality Tungsten Electrodes】The tig welding tungsten electrodes rod is perfect for tig welding. Durable. Good conductivity. Arc starts easier and more stable. Hardness ensured..
• 【High temperature-resistant, Non-melting】98% Tungsten, 1.0% Lanthanum, 0.5% Zirconium, and 0.5% Yttrium, non-radioactive. Annealed brittled for easier sizing. Melting point can reach 3,410 degrees Celsius. Conform to ANSI/AWS A5.12M/A5.12:2009 ISO 6848:2004 MOD..
• 【A Wide Range of Suitable Base Metal Type】Good for stainless steel, copper alloys, carbon steel, nickel titanium, copper alloys, magnesium, aluminum and its alloys, etc..
• 【Upgraded Vacuum Package】10 pcs 0.04''(1.0mm)×7''(175mm) ground finish tungsten electrodes. Anti-oxidation vacuum packaging. Ensure product quality and longer preservation time..
• 【Worry-free Purchase】Selling directly from MARSWARE factory. Returnable within 30 days of receipt of shipment. Experienced and professional customer service team to help you solve any issue..

MTF-5 Cap'n Hook 5-Flame Tip

• Five flames with 100% wrap around heat for easy brazing of copper tubing..
• Capable of brazing up to 1" copper tubing..
• Hook tip made of tough, durable stainless steel to protect against bending.
• Proudly made in the USA and 100% flame tested..
• Fits Uniweld's welding handles Part# 71 or Part# WH550.

Lucas-Milhaupt 99088 Flux Cored Aluminum 822

Amprobe TH-3 Relative Humidity Temperature Meter 2 Display

• Air/Acetylene Soft Flame Kit has always been the Old Reliable flame tool for plumbers.
• Produces a precise 2700 Degrees Fahrenheit target heat for soldering and brazing copper tubing.
• Capable of soldering up to 1/2 inch and brazing up to 3/8 inch copper tubing with supplied tip.
• Torch Handle with rear control valve for accurate gas control and positive shutoff.
• Acetylene Regulator for MC Tank with protective rubber gauge boot.

TIG Welding Tungsten Electrodes 2% Lanthanated Blue WL20 10-Pack 1/16

• PERFECT for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steel.