Top Coping Saws Reviews

Knew Concepts 5' Woodworker Fret Saw with Screw Tension

  • Knew Concepts revolutionized the fret saw world with the introduction of their line of US made patented fret and coping saws. These saws are perfect for jewelers, luthiers, model builders and fine woodworkers, These saws excel when performing fine scroll saw work and when removing the waste between hand cut dovetails..
  • These saws are made from 1/8" thick milled aluminum with a red anodized finish..
  • The ultra-lightweight truss-style frame weighing just 5.1 ounces is quite rigid allowing the blade to be tensioned to a full 40 pounds minimizing blade breakage and defection and improving overall cutting accuracy.
  • The set of knurled blade clamps knobs securely grip the blade and prevent slippage. Blade tension is easily adjusted via a large knurled screw tension knob. Opening is 4-3/4", depth of cut is 5" and overall length is 13".
  • Kit includes one 15 TPI #7 fret saw blade.
Check Stock

FOXBC 6-1/2-Inch Coping Saw Blades, 6-1/2-Inch Long Between Pins, 0.125-Inch x 020-Inch x 15 TPI (10-Pack), 18TPI (10-Pack)

  • Flat wire frame for tensioning standard pin end coping saw blades.
  • Blades can be turned 360 to saw in any direction, Precision sharpened for easy cutting of intricate shapes.
  • Recommended for sawing of all woods, plastics and non-ferrous metals.
  • Blades are standard length & can be used with most major common coping saws.
  • Made from the finest hardened and high carbon steel with precision punched for longer life.
Check Stock

MichaelPro MP018006 6-Inch Deep Coping Saw, Coping Frame comes with Replacement Blades, Hand Woodworking Tool

  • 【HEAVY DUTY FRAME】Specially crafted with durability in mind, our deep coping saws are made of heavy duty frames that allows for longer life span and you do not have to worry about our saws breaking on the job..
  • 【SPECIFICATIONS】6” frame depth, 6-1/2” blade length with 16TPI tooth count. Flat bar frame and with steel pins. Replacement Blades comes in 16T, 20T, 24T and 28T..
  • 【RUST-RESISTANT FINISH】Coated with rust and corrosion resistant finish, you can use this saw over and over again many times, without worrying about having to change it often..
  • 【APPLICATIONS】Use it for woodworking (timber, lumber, angle wood etc.), wood plate, PVC (plastic, pipe, etc.), and light metal (eg. aluminum). Ideal for DIY, craftwork and dismantling jobs..
  • 【NON-SLIP COMFORTABLE GRIP】An ergonomically designed non-slip handle provides a soft grip, hence better control, stability and enhances maneuverability..
Check Stock

IRWIN Tools Coping Saw Blades, Coarse, 3-pack (2014500)

  • Designed for use with your existing ProTouch coping saw.
  • Replace damaged or worn-out coping saw blades.
  • These coarse coping saw blades have a tooth count of 17 pt..
  • Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.
Check Stock

Original 15-in-1 Magic Universal Hand Saw Kit Toolbox Of Multi Blades Set Works As Hacksaw Coping Bow Jab Rip Pruning Chain Handsaws A Cutter Suitable To Cut Wood PVC Pipes Glass

  • ...with a 30 days full refund and 2 years manufacturing defects warranty, our customer service is ready to support and promise to resolve any issue within 24 hours...
  • 【15-IN-1 TOOL WITH UNIQUE DESIGN】Save space and money with this compact size multi-function tool! Rely on it to replace 15- tools including Hacksaw, Coping, Pruning, Bow, Folding, and Jab Hand Saws, Bottle, Tile, Glass, Bolt, Steel Pipe, and Plastic Pipe Cutters, Pruning Scissor Chain Handsaw. Magic saw also has a built-in 7-sizes glass plier to be used after rolling the glass with glass roller. The ergonomically designed grip resists slipping and makes cutting experience comfortable and easy..
  • 【MULTI PURPOSE】Magic Saw is a handy tool ideal for home, garage, workshop, automotive, school, factory, DIY projects, prototyping, sampling, model building, construction, maintenance, repair, gardening, decoration, advertising, pruning trees, wood working, educational, R&D projects, art & craft, leisure activities ie. hiking, fishing camping, hunting & can be used by plumbers, artists, carpenters, smith, craftsmen, handymen builders, hobbyists, house wives, children & all family..
  • 【CUTTING MATERIALS】It can virtually cut any material like.
Check Stock

FOXBC Coping Saw Blades 6-1/2 Inch, 18 Pack ( 15 TPI, 18 TPI, 24 TPI)

  • 15 TPI (6-Pack), 18TPI (6-Pack),18TPI (6-Pack).
  • Coping Saw Blade Used For Cutting Wood, Plastic, Bone, Leather, Rubber And Thin Mild Metals ..
  • 6-1/2 Coping Saw Blades fits Fret, Scroll, Jewelers and Coping Saw Blades & Frame Saw..
Check Stock

Coping Kit | 1¼ Inch by 8 Foot Sections | 8 Pieces | for use with Kayak Pools | for 12 Foot by 20 Foot Pool

  • REPLACE - This replacement vinyl coping is used to replace cracked and yellowed coping, for use with Kayak Pools manufactured between 1977 and 2002..
  • PURELY COSMETIC – This coping is just superficial as it does not actually hold up the liner..
  • SNAP INTO PLACE – The pool liner snaps into the top channel while the coping snaps onto the top channel..
  • SIZE – The Coping New Style is measured at 1¼ inches by 8 feet sections..
  • INCLUDED –This kit comes with enough 8' lengths of coping and the 4 corner caps for use with your 12' x 20' Kayak Pools..
Check Stock

Jewelry Hacksaw Handle Tool Kit, Jewelers Sawbow Saw Frame 12 Blades and Mini Bench Vise with Clamp Jewelry Making DIY Craft Tool

  • High-speed steel coping saw blades cut through most materials with ease.
  • A Flat-Bar frame and DuraSteel pins on this coping saw provide durable use.
  • This coping saw has an ergonomic ProTouch handle to give added comfort.
  • 5-1/2" frame depth and 6-1/2" blade length.
Check Stock

FOXBC Coping Saw Blades, 6-1/2 Inch, Coarse, 18 TPI - 10 Pack

  • Designed for use with your existing ProTouch coping saw.
  • Replace damaged or worn-out coping saw blades.
  • These coarse coping saw blades have a tooth count of 18 pt..
  • Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.
Check Stock

IRWIN Tools ProTouch Coping Saw 2014400 Blue & Yellow

  • High-speed steel coping saw blades cut through most materials with ease.
  • A Flat-Bar frame and DuraSteel pins on this coping saw provide durable use.
  • This coping saw has an ergonomic ProTouch handle to give added comfort.
  • 5-1/2" frame depth and 6-1/2" blade length.
Check Stock

FOXBC Coping Saw Blades Fine, 21 TPI, (10-Pack)

  • Coping Saw Replacement blades for the ProTouch Coping Saw.
Check Stock

Woodpeckers Iron-Grip Coping Sled For Router Table, Precision Woodworking Tools

  • UPGRADED COPING SLED – The Iton-Grip Coping Sled improves on our ever-popular original Coping Sled and beefs it up with a stiffer base, larger fence guide and the Iron-Grip clamp..
  • CRYSTAL CLEAR FENCE – It is 3/8″ thick and 15-1/2″ long, making it ideal to work with any router table fence, whether it’s a Woodpeckers fence, another brand or one you’ve built yourself…it handles them all..
  • NEWLY DESIGNED BACK FENCE – It has a T-slot to mount a sacrificial backer. The backer prevents blow-out where the router bit exits your stock. Just chop the end off and slide the piece forward when you change projects. You’ll get three MDF backer boards with your Iron-Grip. When they’re gone you can make your own from scraps or we offer them in convenient 3-packs..
  • MADE IN USA – Like all Woodpecker products, the Iron-Grip Coping Sled is precisely machined and carefully inspected in our Strongsville, Ohio, manufacturing facility..
Check Stock

Flattening Workbenches and Wide Boards with a Router

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock