Top Conveyor Roller Bearing Reviews

Hudson Bearings SBT-1CS 1/4 Stud Mounted Ball Transfer, Carbon Steel, 1\ Diameter, 75 lbs Load Capacity, 1/4\-20 Thread Stem (Case of 10)

【CAPACITY】Each ball transfer roller with a load capacity of 55 lbs..
【SIZE】16 Pcs 3/4 inch diameter ball bearing roller, 360-degree rotation..
【Material】The bearing units were made of high quality carbon steel, strong and durable, good wear resistance and not easy to wear out..
【MOUNTING】Two screw holes, Mounting Hole Dia: 4mm/0.16-inch..
【APPLICATION】Widely used in conveyor lines installing, home appliance, transmission system, processing system, wooden case, transmission furniture, workbench, etc..

Check Stock

Winco PL-6N, 25-1/2 X 17-1/2 X 6-Inch Plastic White Dough Box, Pizza Box

ELECTRICAL: 220 V / 60 Hz / 1 Ph. POWER: 0.75 HP / 0.55 kW.
MAXIMUM DOUGH CAPACITY: 5 kg. / 11 lbs. WORKING POSITION DIMENSIONS (DWH): 31.7” x 85”(Max. 88") x 41.7”. RESTING POSITION DIMENSIONS (WH): 26” x 63”.
ROLLER SPEED: 124r/min. CONVEYOR BELT SPEED: 18m/min - 32m/min. CONVEYOR WIDTH: 22.5”/ 571.5 mm. CONVEYOR BELT WIDTH: 19.75”/ 501.7 mm.
ROLLER SIZE: 3.5” (Dia.), 20.5” (W). ROLLER ADJUSTABLE GAP: 1 - 35 mm.

Check Stock

16 PCS 1 Inch Roller Ball Transfer Bearing, Flange Mounted Carbon Steel Round Ball Transfer Unit, Universal Rotation Ball Casters for Conveyor, Roller Stand, Transmission, Load Capacity 400 lbs

【CAPACITY】Each ball transfer roller with a load capacity of 400 lbs..
【SIZE】16 Pcs 1 inch diameter ball bearing roller, 360-degree rotation..
【Material】The bearing units were made of high quality carbon steel, strong and durable, good wear resistance and not easy to wear out..
【MOUNTING】Two screw holes, Mounting Hole Dia: 5.6mm/0.2-inch..
【APPLICATION】Widely used in conveyor lines installing, home appliance, transmission system, processing system, wooden case, transmission furniture, workbench, etc..

Check Stock

10 PCS Stainless Steel Roller Ball Transfer Bearing, FERCAISH Universal Rotation Ball Casters Round Ball Transfer Units for Transmission Roller Stand Roller Stand

Package Content: 8 x Nylon Roller Ball Transfer Bearings Flange Mounted 1/2 Inch + Screws..
Dimension: Roller Ball Diameter: 1/2 inch. Total Size: 48*32*20mm/ 1.89*1.26*0.79 inch (L*W*H). Mounting Hole Dia: 4mm/0.157"..
Material: Made of high quality carbon steel, good wear resistance, not easy to wear. Each ball transfer bearing with a load capacity of 22 lbs..
Application: Only use for bearing side up, not for use as castor wheels. Used in conveyor lines installing, transmission system, processing system, workbench, etc..
Quality After Sale Service: Satisfying customers is BokWin's top priority. If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime. BokWin would solve all the problems to your satisfaction. Free Replacement or Refund within 90 days..

Check Stock

Linear Translation Stage, 30 X 50Mm Manual Precision XAxle Linear Translation Platform Rack Pinion Type Sliding Table Mechanical Device for Linear Motion Equipment

Easy for installation. One side is elastic, easy to fit in the hole..
Conveyor goods or belt protection, the roller with soft rubber or composite cover, which will not hurt the goods..
Anti rust, the conveyor roller no rust which protect the metal goods also..
Long lifetime, we have checked every rollers to ensure which can be used for many years no problem..
Light weight, save energy, the roller is light but strong, which can move easily and save energies.

Check Stock

3/4\ Take-up Ball Bearing Unit UCT204-12

Center-pull take-up frame mounts with take-up bearings for shaft positioning or belt tightening in conveyor applications.
Four bolt holes provide secure side-mounting to conveyor systems.
Cast iron for structural rigidity and vibration damping.
Threaded adjustment rod and nut centered in the frame provides even tensioning and positions the bearing.
Side rails guide movement of the slotted bearing in the frame.

Check Stock

20 Pics 5x23x7.5mm Nylon Coated Small Deep Groove Ball Bearings Roller for Door Windows

This item is ordinary precision, adaptation to low speed, low load applications.
Roller wheel ball bearings, fashionable, slide flexible, compression wear.High sealing performance, high operation performance..
Wide application:Suitable for furniture hardware accessories, conveyor belt, sliding doors, windows, shower pulleys and drawers, etc..
Flat Plastic coated small pulley Belt Bearing Pulley Wheel.,Wide application.Low noise, low vibration, high precision. stable performance and durable.Rustproof , resistance, durable..
Material:High carbon steel.Dimension:(Inside diameter)5mm x (outer diameter)23mm x (thickness)7.5mm.(695 Ball Bearings inside .Size :5*16*5mm).

Check Stock

Pack of 5 Conveyor Rollers, 1.5\ Diameter Galvanized Steel, 16\ Between Frame

5 pack Conveyor Rollers. Each roller is 1.5" overall diameter.
16" between frames to suit 18" overall width gravity conveyors.
1/4" diameter mild steel axle, 16.6" long.
Spring retained on one end. SKU: USRS14G-16-roller-5, MPN: UIUSRS14G-16-roller-5.

Check Stock

TECHTONGDA PVC Flat Conveyor Belt Systems for Industrial Transport Aluminium Alloy Frame Conveyor Length 47.2inch Belt Width 15.7inch

【Flat Conveyor 】 The Flat type conveyor consists of aluminum frame, PVC belt, power motor and speed controller..
【Aluminium Alloy Frame】 Frames are made of aluminium alloy and connected by screws for stability. The load bearing is 66-110 lbs. If belt deviation happens, adjust the screw inside the rear aluminum block..
【Benchtop Type】This conveyor belt doesn't have legs. You need to put it on the tables..
【Adjustable Speed】 The speed of belt is adjustable. The adjustable range is 0-20m/min to ensure that it can work perfectly with your automatic machine..
【Application】 This is a benchtop flat conveyor, mainly used to transfer the bottles, electronic parts, plastic bag, paper box, etc for automated production for food, beverage, cosmetics, printing industries..

Check Stock

PAINT ROLLER FRAME 18'L

18″ Overall width (from outside of frame to outside of frame) 15″ between frames.
5′ Overall length with Galvanized 1.9″ diameter steel rollers.
Roller centers of 6″ between rollers (other spacing available). Steel frame 3-1/2″ deep x 1-1/2″ flange x 10 ga. powder coated steel.
Maximum load capacity when conveyor frame is fully supported: 2,680 pounds.
Paint color: Ultimation blue (other colors available with longer lead time) Couplings: Butt couplings for joining end to end.
Total weight of this conveyor: 64 pounds. SKU: URS19G-15-6-5, MPN: UIURS19G-15-6-5.

Check Stock

TECHTONGDA PVC Flat Conveyor Belt Systems Stainless Steel Frames Double Guardrails for Industrial Transport Conveyor Length 70.8inch Belt Width 7.8inch

【Flat Conveyor +PVC Belt】This is a flat conveyor with stainless steel frame and 0.08inch thick black PVC belt. With powerful motor and the max. load bearing is 11lbs..
【Stainless Steel Frames】Frames are made of stainless steel and connected by screws for stability. If belt deviation happens, adjust the screw inside the rear aluminum block..
【With Double Guardrails】It also has guardrails on both sides for protecting the objects from falling off the conveyor belt..
【Speed Adjustable】The speed of belt is adjustable. The adjustable range is 0-18m/min to ensure that it can work perfectly with your automatic machine..
【Application】This flat conveyor is mainly used to transfer the bottles, electronic parts, plastic bag, paper box, etc for automated production for food, beverage, cosmetics, printing industries..

Check Stock

Pack of 2 | 10\ Long Roller and Bracket Set | 1.5\ Diameter

10" Between Frame, 16 Ga. Galvanized Steel Roller.
1/4″ diameter mild steel axle, 11″ long.
Roller brackets are available in (2) length configurations: 10″ between frame and 16″ between the frame. Durable, 100-pound capacity..
Conveyor roller is spring loaded on one end and is removable from the bracket..
Crimped, oiled bearings. SKU: 150R-10-BR-2, MPN: UI150R-10-BR-2.

Check Stock

Single Pass Table Top Dough Roller & Sheeter w/ 16-in Rollers

Powerful 1/2 hp motor, 100 percent gear and chain driven transmission, table top style.
Reversible sheet with sync drive (output conveyor is faster than input), approx. 17” x 67” working surface, 8.8Lb batches.
Locking handle design for easy and precise dough thickness adjustments (0.1Mm to 30Mm/0.004" to 1.18").
Convenient front mounted motor control lever, fold up tables conserve space.
Heavy duty canvas belts mounted on integrated roller guides minimize conveyor adjustments and provides years of worry-free operation.

Check Stock