Top Conversion Type Reviews

Tower Kegerator Conversion Kits Mini Refrigerator Conversion Kit Include Adjustable Beer Faucet Beer Regulator Beer Gas Line D Keg Coupler for Draft Beer Dispensing Equipment by PERA

  • The Sankey Keg Coupler is made of chrome-plasted brass body and stainless steel proble, can retain the beer flavor after long-term use. The beer keg coupler can fit all American D Type Keg, Perfect for dispensing beer, wine, soda and other carbonated drinks..
  • The Tap Tower Kegerator Conversion Kits includes most Convert kits you need to easily conert a refrigerator or freezer into your very own draft beer dispenser. Include Beer Tap, Beer gas regulator, beer gas line, D keg Tap, beer wrench etc..
  • This DIY Kegerator Conversion kit comes with almost everything you need to serve your favorite beverages, just connect the kegs and CO2 tank..
  • It is save your money and space by building your draft beer dispenser system using your refrigerator and PERA kegerator conversion kits..
  • Quality Guarantee, Any Problem for the kegerator conversion kit , Please contact us, Money Back or Replacement Guarantee..
Check Stock

AUDIOTEK - Output 5A Amp Mobile 13.8 Volt DC Power Supply at-PS5,Black,9.1 x 3.5 x 4.5 inches

  • CONVERTS AC TO DC: The Pyramid Bench Power Supply features regulated design. Provides convenient and reliable AC-to-DC power conversion w/ constant....
  • SCREW-TYPE TERMINALS: Features universal hardwired screw-type connection terminals that ensure compatibility with a wide range of devices, equipments....
  • PLUG-IN OPERATION: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion.....
  • SHORT-CIRCUIT PROTECTION: Equipped w/ built-in electronic overload and short circuit protection to ensure safety of the operator and any connected....
  • BUILT-IN COOLING FAN: The power converter features a built-in cooling fan to prevent the device from overheating. Constant amperage is up to 5 AMP w/....
Check Stock

GRLP3 Frigidaire LP Gas Conversion Kit Replacement Part Compare With Electrolux Kenmore Range Cooktop Stove Oven AP4374168 Replaces 316467203 1472864 7GRLP3 etc With Instruction

  • 【IMPORTANT NOTE】 Please check your range/stove/oven model number carefully before ordering, Confirm this LP Gas Conversion Kit fits or not.....
  • 【WIDELY FIT】 Full kit set Included 21 x GRLP3 LP Gas Conversion orifices, 1 x Install instruction, 1 x Gas type label. Part Number GRLP3....
  • 【PREMIUM QUALITY】Pure Brass material, durable for more than ten years. The most affordable price and best quality LP Gas Conversion Kit..
  • 【EASY TO INSTALL】With install instruction, you can have a perfect solution in just 20 minutes..
  • 【LIFETIME GUARANTEE】 Any questions not completely satisfied, please contact us, you can have full refund or exchange within 30 days..
Check Stock

KIMGU N880093 anvil assembly replacement for DeWALT N415874 N4158745 DCF899 DCF899B DCF899M1 DCF899P1 DCF899P2

  • Replacement anvil, part number N415874 N866410.
  • Compatible with: DCF899B Type 1, DCF899B Type 3, DCF899M1 Type 1, DCF899M1 Type 3, DCF899P1 Type 1, DCF899P1 Type 3, DCF899P2 Type 1, DCF899P2 Type 3.
  • DCF899 Impact wrench conversion kit for N866410 DCF899B DCF899M1 DCF899P1 DCF899P2 DCF899H N415874 DCF899H.
  • Measures about 2.25 X 1.85 X 0.95 inches.
Check Stock

Fielect 10Pcs DB9 VGA Gender Changer 9 Pin Female to Female 2-Row Mini Gender Changer Coupler Adapter Connector for Serial Applications Blue

  • 【Parameter】 - Conversion type: DB9 mother to mother.
  • 【Features】 - The gender conversion coupler provides EMI/RFI shielding, which can block noise and interference to keep the data signal clear, and is designed for serial applications.
  • 【Function】 - A gender converter or "gender bender" is a hardware device located between two cable connectors of the same type and gender, used to correct the problem caused by interconnecting two devices or cables with connectors of the same gender Mismatch.
  • 【Advantage】 - The compact and concise design provides convenience for carrying and storage, easy to use and install. The convenient VGA inline coupler can be used at home or carried with you.
  • 【Application】 - The converter handles limited space and extends the length of two short VGA cables for connecting office monitors or projectors.
Check Stock

Fielect DB25 VGA Gender Changer 25 Pin Female to Male 2-Row Mini Gender Changer Coupler Adapter Connector for Serial Applications Blue Pack of 10

  • 【Parameter】 - Conversion type: DB25 male to female.
  • 【Features】 - The gender conversion coupler provides EMI/RFI shielding, which can block noise and interference to keep the data signal clear, and is designed for serial applications.
  • 【Function】 - A gender converter or "gender bender" is a hardware device located between two cable connectors of the same type and gender, used to correct the problem caused by interconnecting two devices or cables with connectors of the same gender Mismatch.
  • 【Advantage】 - The compact and concise design provides convenience for carrying and storage, easy to use and install. The convenient VGA inline coupler can be used at home or carried with you.
  • 【Application】 - The converter handles limited space and extends the length of two short VGA cables for connecting office monitors or projectors.
Check Stock

OPTURA HD Photo® Wide Angle + Macro Lens for Canon Rebel EOS T1 T2 T3 T4 T5 T6 SL1 SL2 SL3 XSI XTI T7 T3I T5I T4I 7D 80D + OPTURA Micro Fiber Cloth

  • Optical Power: 0.43X Time conversion factor of your current lens setting + MACRO.
  • Optical system: 3 elemens in 3 groups conversion type.
  • Mount system Optics Screw type in front of existing camera lens with 58mm filter thread Multicoated optical elements.
  • Capabilities: 174 Degrees circular fisheye capability Full Panoramic shots capable.
  • PACKAGE INCLUDED: 1 58mm OPTURA HD Wide Angle Lens + 1 OPTURA HD Micro-Fiber.
Check Stock

FTDI USB-RS485-WE-1800-BT Cable, USB to RS485 Serial, 1.8M, Wire END

  • Price For: Each Accessory Type: CABLE, SERIAL CONVERSION For Use With: USB to RS485, SERIAL CONVERSION RoHS Compliant: Yes.
  • The USB-RS485-WE-1800-BT from FTDI is an USB to UART cable with RS485 level UART signals..
  • It corporate FTDI's FT232RQ USB to serial UART interface IC which handles all USB signalling and protocols.
  • The integrated electronics also include RS485 transceiver, Tx and Rx LEDs which give a visual indication of traffic on cable..
Check Stock

High Frequency Transducer, Bandwidth Mixing Board Mixer Module -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • 【Important Data】: SSB noise figure (NF) of 9.75 dB--Input IP3: 28.5 dBm--Input P1dB: 13.3 dBm--Typical LO drive: 0 dBm--Power conversion gain of 1.8 dB.
  • 【Wild Used】: This 5V double balance up and down frequency mixer module is widely used for cellular base station receivers, Radio link down converters, Broadband block conversion, Instrumentation.
  • 【Low Power】: Our 130mA 50 Ohms Balun coil coupling frequency conversion mixer features adjustable bias for low power operation, so you can trust and use this RF mixer inverter with confidence.
  • 【Wonderful Components】: This 5V ADL5801 double balance up and down frequency mixer module is equipped with exposed paddle, 4mm x 4mm, 24-lead LFCSP package, so it will be an ideal choice for you.
  • 【Size】: Power supply: DC+5V@80mA(anti-reverse connection protection.)--RF_IN/RF_LO input frequency range: 10-6000Mhz--Input and output impedance: 50 ohm--Type:Input Balun coupling, Input/output Balun coupling(Optional)--Weight: Approx.15g/0.5oz.
Check Stock

DC Voltage Reducer Converter, DC 24V to 12V 5A Buck Converter, Automatic Car Step Down Up Voltage Regulator, Transformer Waterproof Module

  • High-quality material: Encapsulated with high-quality die-cast aluminum material shell, with good heat dissipation function, with silicone potting at the back, waterproof, dust-proof, shock-resistant, safe and reliable..
  • Power conversion efficiency: Using synchronous rectification technology and built-in smart chip, the voltage converter provides over/under voltage input, over temperature, short circuit, reverse input, waterproof, low voltage comprehensive protection..
  • Widely used: The output power is 60w, which is widely used in motors, driving recorders, car trucks, vehicles, golf carts, LED light strips, electric fans, cameras, lights, screens, monitoring systems, solar panels and DIY, etc..
  • Input rated voltage: 24V DC, accept (18V-36V DC) range.
  • Output voltage, current, power: DC 12V 5A 60W.
  • Input wiring type: red positive, black negative.
  • Output wiring type: yellow positive, black negative..
  • Adopt synchronous rectification technology, wide voltage input, improve conversion efficiency, maximum efficiency: 92%-97%.
  • If you have any questions, please feel free to contact us, We will reply within 24 hours..
Check Stock

Red Seats, Volume 3 [Explicit]

  • Brand New Holley Sniper EFI Self-Tuning Kit - Black Ceramic Finish, 4 Barrel Fuel Injection Conversion - Self Tuning Kit plus Handheld EFI Monitor. (Part #550-511).
  • Holley just brought EFI within range! Introducing Sniper EFI! It's economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today!.
  • Specs: CFM: 800 | Coast Guard Approved: Yes | Finish: Black | Flange Style: Dual Bolt Pattern | Fuel Pressure: 58.5 PSI | Height: 3.28" | Injector Size: 100 lb./hr @58.5 PSI.
  • Inlet/Outlet Size: 9/16-18 Female O-Ring (AN 6) | MAP Sensor: 2Bar | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4.
Check Stock

CBI Tool Division Pipe Fence Weldable Saddle Cap - Size 2 7/8" to 4 1/2" (2741) (50)

  • CONVERTS AC TO DC: The BTECH Regulated Power Supply allows for simple and reliable AC-to-DC power conversion w/ constant source of DC voltage. An ideal power source for CB, Ham, GMRS and LMR Two way radios, Scanners, and all DC equipment. Adjustable from 9 - 15V or use a fixed 13.8V setting..
  • CIGARETTE PLUG, SCREW-TYPE TERMINALS, & SNAP-IN TERMINALS: Features a cigarette plug, universal hardwired screw-type connection terminals, and snap-in terminals that ensure quick compatibility with all DC powered devices..
  • SIMPLE PLUG-IN OPERATION: Simply plug in the power supply to a 110V AC outlet to provide a constant source of DC voltage, allowing for an easy and consistent power conversion. Switch-activated power control eliminates the need of an external battery or additional power source.
  • SAFETY PROTECTED: The RPS-30M has advanced safety protection including: overheat, short, and amperage surge protection..
  • BTECH is proud to be in the USA, which allows you to have the best available local support for any issue that may arise. BTECH only engineers and develops radio products. This br....
Check Stock

Mosquito Bites: Aerial excitement and surprises in the lethal skies of WWII (The Watson Saga Book 2)

  • CONVERTS AC TO DC: The BTECH Regulated Power Supply allows for simple and reliable AC-to-DC power conversion w/ constant source of DC voltage. An ideal power source for CB, Ham, GMRS and LMR Two way radios, Scanners, and all DC equipment. Adjustable from 9 - 15V or use a fixed 13.8V setting..
  • CIGARETTE PLUG, SCREW-TYPE TERMINALS, & SNAP-IN TERMINALS: Features a cigarette plug, universal hardwired screw-type connection terminals, and snap-in terminals that ensure quick compatibility with all DC powered devices..
  • SIMPLE PLUG-IN OPERATION: Simply plug in the power supply to a 110V AC outlet to provide a constant source of DC voltage, allowing for an easy and consistent power conversion. Switch-activated power control eliminates the need of an external battery or additional power source.
  • SAFETY PROTECTED: The RPS-30M has advanced safety protection including: overheat, short, and amperage surge protection..
  • BTECH is proud to be in the USA, which allows you to have the best available local support for any issue that may arise. BTECH only engineers and develops radio products. This brand focus allows you to have the best available radios and accessories with the most features, with real USA warranty and support..
Check Stock