Top Continuous Rotation Servo Motors Reviews

6 Channel Digital Servo Tester with Over-Current Protection

  • Use high-precision six potentiometers, which can control the corresponding six servos simultaneously.
  • The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current.
  • The voltage that the controller require should correspond to the voltage required by a servo that you controlled.
  • There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation.
  • then press it, remove the center of the state, the knob can continue to control the servo rotation.
Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

Trane SF AC Condenser Motor - 1/4 HP - 208/230 Volts - 1075 RPM – 48Y Frame - SFMC251SP2V - Replaces Emerson 1860 – A O Smith FSE1026S - GE 3728 - Fasco D909

  • Trane Condenser Motors are designed to survive in harsh environmental conditions, rugged designed and field tested by the engineers and technicians. A reliable condenser motors for air conditioner that can last years to serve you..
  • Trane AC Condenser Motors are UL approved for USA and Canadian market and Class “B” insulated..
  • Trane Air-Conditioner Condenser motors are High Efficiency, Low Power Consumption, Continuous Duty, Contained Air Over, Thermally Protected, Reversible Rotation, Suitable for 48Y Frame mounting brackets, mount in any direction, Shaft Size: 1/2 Inch Diameter x 5 Inch Long..
  • Trane Condenser Motor for air conditioner replaces other brands condenser motors: - Emerson 1860 - AO Smith FSE1026S - Fasco D909 - GE Regal Beloit 3728.
  • Trane Air-Conditioning name stands behind the quality, reliability and superior performance of these Condenser motors. Buy the best, buy Trane AC Condenser motors.
Check Stock

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

  • 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
  • 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
  • 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
  • 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
  • Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
Check Stock

FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More

  • HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

Furnace Draft Inducer/Exhaust Venter Motor Fits Jakel 1172823

  • Multi-speed, constant torque, brushless DC motor.
  • NEMA 48-frame (5. 6 inch diameter) belly band mount with 5-inch long 1/2 inch diameter shaft.
  • Four discrete speeds using 24VAC, plus automatic continuous fan speed.
  • Designed to replace direct-drive blower motors in residential and light commercial indoor furnaces, air handlers and package systems that were designed with a 6-pole 1075rpm rated PSC motor.
  • Replaces / Supersedes: American Standard & Trane MOT13004 , MOT-13004 , MOT12888 , MOT-12888 , MOT12292 , MOT12319 , MOT12542 , Carrier / ICP HD44AE137 , HD44AE137A , HD44AE138 , 1172987 , 1173682 , 5SME39HKL017 , 5SME39HXL285 , 5SME39HXL298 , S81-948 and other 1/2 HP X13 Constant Torque Motors from ALL Major Manufacturers as well as the Azure Digi-Motor # 10800..
  • DOES NOT REPLACE EON , 3. 0 , 2. 3 and 2. 5 ECM Motors.
  • 1/2 Horsepower , 208-230 VOLT , Universal X13 Replacement Motor.
Check Stock

2-Pack Metal Aluminum 25T Servo Horn Steering Arms for 1/10 1/8 Scale RC Trucks Cars Buggies Airplane Replacement Upgrade Parts Blue

  • Compatible with:25T Spline & M3 threads,Compatible with Mostly Standard Servo Motors for HSP,Power HD,Futaba, Axial ,Savox ,Xcore, MG995 MG996R MG946R....
  • The Double Arms：47x10x7.5mm (Hole centers at 12 and 20mm from the servo output.).
  • The Short Arm：28x10x7.5mm(Hole centers at 12 and 20mm from the servo output.).
  • Spare part:The RC 25T Servo Horn Steering Arms Easy and convenient to install and remove.Better than most of the plastic material..
Check Stock

35KG Digital Servo Full Metal Gear High Torque Waterproof DS3235 with Two 25T Servo Arms for RC Car Robot Control Angle 180

  • UPGRADED NEW VERSION: DS3235 35KG High-precision, Coreless Stainless Steel Gear, Fully Waterproof, Digital Servo. Included two 25T double-locking metal servo horns.
  • LARGE TORQUE: maximum torque is up to 35 kg/cm (275 oz/in)@6.8V, made of strong copper & aluminum gears.
  • HIGH PERFORMANCE: Equipped with high precision potentiometers and high-resolution digital chip, fast response, strong anti-interference ability, low noise, fast heat dissipation..
  • HIGH ROTATION: well-controlled, 180 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities.
  • HIGH QUALITY: Waterproof rubber seals screws, made of first-grade material ensure the longevity of the products. CNC aluminium middle shell enhances heat dissipation and ensures the servo motor can work well..
Check Stock

Dilwe RC Car Servo,Durable Plastic Gear Servo for WLtoys 12428 / 12427 1/12 RC Car Upgrade Spare Parts

  • ✔20KG Large Torque - 20KG Servo Motor 20.5 kg.cm(4.8V) - 22.8 kg.cm(298.5 oz/in)(7.2V)..
  • ✔270 Degree Rotation - Pulse width signal of 20kg servo motor from 500 to 2500 μsec, well controlled from 0 to 270 degrees. When the input signal is 500usec, the angle is 0 degrees, and at 2500 μsec, the angle is 270 degrees..
  • ✔High Precision - DS3218 20kg digital servo accuracy with precision potentiometers. Excellent linearity, precision control, high quality leads and center nicely..
  • ✔High Rotation Support Waterproof - Waterproof performance: IP66. Metal servo motor accuracy and linearity have been greatly improved! Perfect satisfy the needs of making robots. Also for cars, boats, vehicles and remote control toys and so on..
  • ✔Dimensions - 40*20*40.5mm(1.58*0.79*1.60in).
  • Weight - 56g±5%(2oz±5%). Operating voltage range: 4.8-7.2V.
Check Stock

Aluminum Long 25T Servo Horn w/5 Mounting Holes for Futaba Savox Servo,2-Pack

  • 24T Spline & M3 threads,Compatible with Hitec Servo Motors.
  • Aluminum CNC machined for precision,anodized finish.
  • Includes two steel bolts to secure the split-clamp onto the servo output.
  • Dimension:35x15x6mm (Hole centers at 20 and 24mm from the servo output.).
Check Stock

10PCS ShareGoo 25T Aluminum Servo Horns Arms M3 Threads Metal Steering Arm for RC Car Truck Buggy Airplane-Red

  • Suitable for MOSTLY 25T Standard Servo Motor.For example,Compatible with Towerpro,HSP,HD power,Futaba, Axial ,Savox,Xcore,Standard Servos Motors, MG995 MG996R MG946R ,S3003 etc servo.
  • Adjustable type servo arm,includes two steel bolts to secure the split-clamp onto the servo output..
  • Hard aluminum construction for precision and durability..
  • For RC Scale Type: for RC buggy, rc car, rc truck, rc truggy.
  • Better than most of the plastic material,Pack of 10.
Check Stock

ANNIMOS 20KG RC Servo Digital High Torque Full Metal Gear Waterproof,180° Control Angle

  • ✔High-precision digital servo upgraded version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
  • ✔Durable - equipped with strong copper & aluminum gears, CNC aluminium middle Shell,to ensure long service life.
  • ✔Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V,with 25T Adjustable metal servo arm.
  • ✔High Rotation - well-controlled,180 degree rotation.
  • 360 degree rotation when power-off, perfect for robot joint activities.
  • ✔Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm).
Check Stock