Top Connection Box Instrument Fittings Reviews

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ...nce, heat resistance, low-temperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a strong and reliable crimp fitting application..
  • ✔【EASY INSTALLATION】Pex clamp rings slide the 3/4 in. clamp ring over the pipe, push the pipe onto the fitting and sq....
Check Stock

D Addario Kill Switch Instrument Cable 15 feet

  • Built in momentary “kill switch” for silent Instrument changes.
  • Patented Geo-tip design ensures a secure connection in any instrument, pedal or amp jack.
  • In-line soldering technology provides a superior connection and powerful strain relief.
  • Chuck style cable clamp further improves strain relief..
  • Available in 10', 15', 20', and 30' lengths.
Check Stock

40 Pcs Quick Connect Straight Push Connectors,5/32' 1/4' 5/16' 3/8' 1/2 inch OD Push-to-Connect fittings,Quick Release Pneumatic Air Line Hose Fittings Kit Connector for 4mm 6mm 8mm 10mm 12mm OD Tube

  • ✅[EXCELLENT MATERIAL]: Made of quality PU & plastic.High pressure resistance,can withstand strong pressure without tripping out.
  • ✅[PUSH TO CONNECT FITTING TYPE]: 1/2",3/8'',5/16'',1/4'', 5/32", fit for 12mm 10mm 8mm 6mm 4mm OD polyethylene pipe, PU/ PA/ PE/ PVC and nylon tube.
  • ✅[QUICK CONNECTION AND REMOVE]: Simple push in design for connecting to the tube and provide secure connection. It can be easily removed by pressing the release ring.
  • Working Temperature: 0~60°C/32~140°F.
  • ✅[PACKAGE INCLUDES]: 8x1/2" fittings,8x3/8" fittings,8x5/16 fittings,8x1/4" fittings,8x5/32" fittings,40 pcs in total.
Check Stock

Glarks 125Pcs 3-in-1 Furniture Connecting Hardware Set, Hex Socket Cap Furniture Barrel Screws Bolt Nuts & Cam Fitting & Pre-Inserted Nut & Eccentric Wheel for Crib, Wardrobe Splicing, Cabinet Drawer

  • ♛【Product Size】: Socket cap screws include 3 size of m6x30, m6x50, m6x70, barrel nuts is m6x12, m6x15.
  • ♛【What You Get】: In this furniture connection set, we offer 15pcs hex socket cap screws, 20pcs barrel nuts, 30pcs cam fittings, 30pcs eccentric wheel, 30pcs nylon pre-inserted nuts, total 125pcs well packed in a plastic box..
  • ♛【Product Feature】: Socket cap screws and barrel nuts with good match between them used for the manufacture of a solid joint for your furniture. Nylon pre-inserted nuts adopting expansion principle for perfect locking. These screw bolt nuts are perfect for replacing old crib screws and joining wood, boards..
  • Pre-inserted nut are made of high quality nylon.
  • eccentric wheel size is 32mm, 35mm, 40mm.
  • Cam fitting and eccentric wheel are made of alloy steel. They are strong and reliable for your furniture connection..
  • ♛【Wide Application】: Our 3-in-1 furniture connection can suitable for all types of furniture, cabinet, drawer, dresser, perfect used for crib, baby bed, headboard, desk, chairs, Wardrobe and other DIY projects..
  • Cam fittings size is 12mmx15mm. Due to manual measurement, there may be error of 0.1-0.3mm..
  • ♛【High Quality】: Furniture screws and barrel nuts are made of durable zinc plated steel....
Check Stock

LOKMAN 50 Pack 5/8 Inch PEX Cinch Clamps Stainless Steel Cinch Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections 5/8 Inch

  • HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction..
  • 360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree....
  • WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • WIDELY APPLICATIONS - Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications....
  • SIZE - 5/8 inch (20.8 mm) PEX cinch clamps, fit for 5/8 inch PEX pipe..
Check Stock

KLOS Silent Cable - No Contact Noise Instrument Guitar Cable for Electric Guitar, Bass Guitar, Acoustic Electric Guitar, Straight to Right Angle, 10 ft, Black - Single

  • INNOVATIVE: The first guitar cable to neutralize connection noises with ease. Silencing buttons on both ends of this quarter inch cable eliminates contact noise when plugging into your instrument or audio mixing table..
  • PREMIUM: Our straight-right angled 1/4 to 1/4 audio cable boasts strong and flexible braided shielding for added durability. Plus, we used performance grade Oxygen-Free Copper for longer life expectancy and ultra low capacitance to preserve the instrument’s tone..
  • SIMPLE: Works with active and passive pickups. Great for on stage, in the studio, or casual play at home. This cable is suited to work with any electric instrument, making it an incredibly versatile performance tool..
  • VERSATILE: This 10 ft amp cable is compatible with any instrument or audio equipment that uses a quarter inch connection including electric mandolins, ukuleles, keyboards and pedal boards..
Check Stock

Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank

  • ...ter-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank

  • ...ter-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

LOKMAN 50 Pack 1/2 Inch PEX Cinch Clamps, Stainless Steel Cinch Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (1/2 Inch)

  • HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction..
  • 360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using system..
  • WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • WIDELY APPLICATIONS - Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
  • SIZE - 1/2 inch (17.5mm) PEX cinch clamp rings, fit for 1/2 inch PEX pipe..
Check Stock

Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water

  • ...ter-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

JACO Industrial Quick Connect Air Hose Fittings | Plug & Coupler Kit - 1/4\ NPT (Set of 12)

  • SHOP GRADE - performance tested & built to last from 100% solid brass & steel designed for all-day use working with air compressor tools, hoses, and airline accessories in the garage or shop..
  • HIGH PRECISION - all fittings are built to 1/4 inch NPT industrial specs (Type D) for endless compatibility with your best air compressor tools & accessories (also called Type I/M)..
  • QUICK CONNECTION - couplers feature heavy duty six ball bearing insert opening for quick, airtight, and hassle-free connection to plugs - spend less time connecting your air line tools & more time conquering your jobs..
  • LEAK-PROOF - engineered with precision specs and applicable for home, commercial, and industrial use. All plugs & couplers will work with any size air hose or pneumatic tool that features 1/4 inch end fittings. All kits include a bonus thread seal tape roll..
  • 100% Lifetime Warranty by JACO - never worry about needing the right size air fittings again. Trusted by mechanics & backed for life by our business with over 35 years of experience serving the pneumatic tools industry!.
Check Stock

Boss DD-500 Digital Delay Bundle with Roland 10ft Instrument Cable, Roland 6in Patch Cable, and Picks

  • Studio-level sound with class-leading 32-bit AD/DA, 32-bit floating point processing, and 96 kHz sampling rate and 12 versatile delay modes.
  • Onboard patch memories and Equipped with a built-in Phrase Looper, MIDI, USB..
  • Five newly added effects, including vintage Binson Echorec 2, touch-responsive filter delay, and more.
  • New Insert Loop function, selectable EQ insertion position, expanded independent delay connection modes.
  • Enhanced effects with sound quality refinements, including stereo pitch shifters and overtone effects.
  • Bundle includes a premium 10-foot Roland Black Series instrument cable is included, as well as a 6-inch Roland Black Series Patch/Pedal cable, both featuring multi-strand, oxygen-free copper core wire that translates the true tones of your instrument, while high-density spiral shielding eliminates unwanted noise. We have also included a 3-pack of Boss celluloid guitar picks in varying thickness, so you can start playing right out of the box!.
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000

  • ...ter-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock