Top Conduit Threadless Connector Reviews

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

  • 【PREMIUM Liquid-Tight Conduit】- Length :50',ID:1inch,OD:1.22inch, The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is....
  • 【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

1/2\ liquid tight connector 90 degree 20 pack

  • Size & Quantity: 10Pack of NPT 1/2 Liquid Tight Connector..
  • Material:Liquid Tight Connector are made of high quality nylon,Resistant to salt water,weak acid,alcohol,oil,grease and common solvency..
  • Features:The claws and seals of excel lent design,can hold cable firmly and have a wider cable range..
  • Easy to Install:They attach easy to the box and secure tightly to the flex conduit.no diassembly , just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • Widdly Used:Nice tight fit for outdoor electrical box,marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting etc..
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1/2inch50ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,1/2 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length:50",ID:1/2inch,OD:0.83inch,Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical....
  • 【Complete Accessories】-1/2-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 390-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,,UL Listed, (6 PACK) (1/2-180D)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,,UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

NewkeepsR 2PCS-18G/16G Implant Grade Titanium Pin Insertion Taper for Threadless Labret Bar 1.0mm/1.2mm

  • Sold as 2 PCS: one taper is 18ga(1.0mm) thickness,another is 16ga(1.2mm),Length: 38mm (approx 1.5 inch). A thin pin at the end(no thread/no hole).Material: 6AL4VELI ASTM F-136 implant grade titanium ,Titanium has excellent biocompatibility and is half the weight of surgical steel..
  • Function:① Stretch hole for gauge modification purpose(from 20g to 18g/16g),Good piercing hole stretch/expander kit.Make your stretching journey safe and easily. ② Used for assisting in the placement of shaft/post. Put threadless piercing bar in the end of the pin, then push it though.Pin will come out of the hole and threadless piercing bar/post will be in. ③ Changing your nose piercing nostril stud much easier.Highly recommend to change threadless/press-fit into jewelry!.
  • Attention:① Our threadless insertion pin only fit our threadless piercing jewelry,others is unfit. ② Make sure to use some kind of vitamin e or mineral oil for lubricant while stretching. ③ If you had sensitive skin using this titanium insertion pin is very safe..
Check Stock

Hose Adapter, WarmSpray RV Dump Hose Attachment for Faucet, Garden/Sink/Bath Faucet Water Hose Bib

  • ...ts to a standard water hose, via a male, standard water connection. The other end a highly flexible, silicone polymer sleeve stretches to fit over the end of virtually any standard water source. Simple and quick to install..
  • Works With Many Features: Connects to damaged or threadless faucets.
  • Improved expandable depth design to prevent leaks and blowing off from the faucet better.
  • Perfect for indoor and outdoor use (such as garden watering, car washing, pet cleaning, washing the floor and so on).
  • Quick and easy installation, this hose connector for RV can be easily slipped over a damaged faucet while the threaded end is attached to the hose..
  • Not intended for use under pressure. Keep the other end of your water hose open or the pressure will pop the hose adapter off the spigot..
Check Stock

SMC D-M9B Auto Switch, Solid State, General Purpose

  • Band, rail, tie-rod and direct mounting styles.
  • Electrical entry: grommet, connector, terminal conduit.
  • Direct mount: solid state, general purpose, 2 wire, horizontal.
Check Stock

Clamp Type Connector Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver (4, 3/4 Inch)

  • Multi-quantity: there are 8 pieces cable connectors in the package, enough quantity to meet your replacement and using needs in daily work, better cooperate with you to finish work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw straps design: the 650XY2 clamp type connector has 2 pieces screw straps and flexible conduit FTGS.
  • It is the service entrance cable fittings but does not the metallic cable.
  • Cable size measures 14 awg, and the knockout is about 1/2 inches.
  • Size information: cable connector clamp is about 1/2 inches, before purchasing, pay attention to whether it meets your daily needs for work and cooperation, in order to prevent wrong purchase.
Check Stock

Manufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3

  • Material:Conduit hangers are made of zinc-plated iron,durable to use..
  • Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
  • High-quality and durable conduit hangers with bolt..
  • Used to secure and suspend EMT, rigid conduits from overhead supports..
Check Stock

Clamp Type Connector 1/2 Inches and 3/4 Inches Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver

  • A variety of quantities: there are 4 pieces 4 1/2-inch and 4 pieces 3/4-inch cable connectors in the package, enough to meet your replacement and use needs in daily work, and better cooperate with you to complete the work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw strap design: 650XY2 clip-on connector has 2 screw straps and flexible conduit FTGS.
  • It is a service entrance cable accessory, but not a metal cable.
  • The cable size is 14 awg, and the shooting distance is about 1/2 inch and 3/4 inch.
  • Size information: the cable connector clamp is about 1/2 inch and 3/4 inch, please pay attention to whether it meets your daily work and cooperation needs before buying to prevent wrong purchase.
Check Stock

ANDO RACING Shift Knob Adapter,Universal Aluminum Alloy Shifter Knob Boot Retainer Gear Stick Connector for No Threaded Manual Gear M12x1.25

  • 【Material】The connector is made of high quality aluminum alloy, with corrosion resistance, and longer service life.
  • 【Applicability】External thread pitch M12x1.25, adapter inner diameter: 13.9mm. Almost suitable for 12x1.25 pitch shift knobs, especially suitable for most shift knobs.
  • 【Function】After installation, the shift knob shifter adapter can be changed from threadless to threaded.
  • 【Features】Use a wrench to tighten the screws, and you can quickly install it in a few minutes.
  • 【Service】All products are guaranteed for One year. If you have any questions, please contact our team.
Check Stock