Top Conduit Threaded Rod Reviews

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

Eagle Tool US ETF25016 Wire and Cable Installer Fiberglass Fish Rod Kit, 16-Foot assembled length, Made in the USA,Orange

  • 1/4" diameter rods made of maximum grain fiberglass provides added rigidity and splinter resistance when multiple sections are connected.
  • Two different threaded tips available to accommodate various bundles of wire or cable.
  • Warnings: Use approved eye protection when using this product..
  • Although the fiberglass fish rod itself is non-metallic, its metallic tip and leader are conductive and could be grounded against conduit..
Check Stock

BOSCH GWS12V-30N 12V Max Brushless 3 In. Angle Grinder (Bare Tool)

  • COMPACT GRINDER DESIGN: designed to make quick, difficult cuts in tight spaces other tools can't.
  • OPTIMIZED GEAR STRUCTURE: produces 19,500 no-load rpm to cut threaded rod, strut, conduit, tile and more.
  • ERGONOMIC BUILD: engineered to fit the palm of a user’s hand, for outstanding comfort and control.
  • EFFICIENT BRUSHLESS MOTOR: maximizes battery runtime in extended applications.
  • RESTART PROTECTION: helps prevent accidental tool startup when switching batteries.
  • OVERLOAD PROTECTION: reduces the risk of the motor overloading or overheating.
  • INNOVATIVE SPINDLE-LOCK DESIGN: provides fast wheel change, with a spindle-clip release.
  • FAST BRAKING TIME: wheel stops in less than a second after the grinder is turned off.
Check Stock

TRANSGLOBE CB-4370 ST conduit-mounts

  • One assembly provides support for electrical box and/or conduit from drop wire or rod.
  • Eliminates need for offset bending conduit.
Check Stock

Thomas & Betts 12008100 1' BLUE ENT 100' COIL

  • Recognized for use with PVC rigid non-metallic conduit fittings with all size of ENT.
  • One piece ENT coupling, threaded terminator and rigid non-metallic conduit fittings are rated concrete tight without tape.
  • Flex-Plus Blue ENT is a non-metallic flexible raceway for use in walls, floors, and non-plenum ceilings.
  • Lightweight, hand bendable, and free from sharp edges which reduces installation time and saves money.
Check Stock

Boltmaster 11002 8/32 X 12 Threaded Rod NC Zinc Pack of 10

  • Zinc plated. Steel Threaded Rod The most economical and most common form of steelworks threaded rod..
  • Should not be welded. Typically used by the plumbing and contracting trades..
  • Threaded steel rod. Used in maintenance departments in various applications..
  • Coarse threaded. Threaded steel rod coarse style steel rod Should not be welded..
  • High Quality, provides great strength and protection against corrosion to make these machine nuts last!.
Check Stock

Dremel US20V-01 20V MAX Cordless Compact Saw Tool Kit (Renewed)

  • Benefits: This 3-in-1 compact saw allows for flush cutting, plunge cutting, and surface preparation. Cuts nearly all materials such as wood, metal, PVC, masonry, and more.
  • Includes: The kit includes Swiss-made, high-quality engineered 4-inch US500 premium carbide wood and plastic wheel. it also includes a 3.5-inch US510 metal cutting wheel. Abrasive material for applications such as copperpipe, conduit, coated wire shelving, thin sheet metal, threaded rod, sheet aluminum, and more.
  • Battery Life: 20V MAX Lithium-Ion battery delivers long-lasting consistent power for smooth finished cuts.
  • Diamond Tile Cutting Wheel: Kit includes the 3.5-inch US540 Diamond tile cutting wheel. Diamond-coated for cutting wall tile, floor tile, porcelain, slate, stone, and cement backer board.
  • Adjustable Depth Guide: Adjustable depth guide provides additional control for cuts up to 3/4-inch into materials such as wood, metal, tile, plastic, laminate, masonry, and more.
Check Stock

Pulse

  • CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
  • VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
  • NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
  • HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
  • LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.
Check Stock

Dremel Max Life EZ506HP 1-12“ (38.1mm) High Performance Premium Metal Cutting Wheel , Blue

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability. Built to give you longer lasting, stronger performing, versatile accessories..
  • The Max Life EZ506HP Premium Metal Cutting Wheel is coated with super abrasive grit called cubic boron nitride (CBN) which provides maximum durability allowing the wheel to remain sharp longer, stay cool, and won’t shrink..
  • Lasts 20X longer than our Fiberglass Reinforced cutting wheels..
  • Ideal for cutting a variety of metals including stainless steel, nails, rebar, metal studs, threaded rod, copper, conduit, metal HVAC ducts, metal door jambs, and galvanized strut..
  • The Dremel EZ-Lock is the first patented system of its kind making accessories changes 6X faster compared to using a standard mandrel. Accessory changes are quick and easy by eliminating the need for a screw and a screwdriver..
Check Stock

Dremel US20V-02 Compact Circular Saw Kit with (2) 20V Batteries, Charger & Storage Bag, Cordless Compact Saw, 15,000 RPM - Ideal for Flush Cutting, Plunge Cutting and Surface Preparation

  • 3 in 1 compact saw allows for flush cutting, plunge cutting and surface preparation..
  • Cuts nearly all materials such as wood, metal, PVC, masonry and more..
  • Kit includes Swiss made, high-quality engineered 4" US500 premium carbide wood and plastic wheel..
  • Kit includes the 3.5" US510 Metal Cutting Wheel. Abrasive material for applications such as copper pipe, conduit, coated wire shelving, thin sheet metal, threaded rod, sheet aluminum and more..
  • Kit includes the 3.5" US540 Diamond tile cutting wheel. Diamond coated for cutting wall tile, floor tile, porcelain, slate, stone, and cement backer board..
Check Stock

Jonard Tools ROD-3316 Coated Fiberglass Fish Tape Duct Rodder with Accessory Kit 3/16 x 300

  • CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
  • VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
  • NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
  • HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
  • LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.
Check Stock

Sealproof 3/4-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 3/4\ Dia, 25 Feet

  • The product is manufactured in United States.
  • All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement..
  • Rigid non-metallic conduit fittings are recommended for use with Carlon 1-1/4 in. to 2 in. Flex-Plus Blue ENT.
  • For adapting non-metallic conduits to boxes, threaded fittings and metallic systems.
Check Stock

3/4” Heavy Duty Metal Cable & Wire Support Batwing J-Hook Hangers with Bat Wing Clip for attaching ceiling wire & threaded rod for Cable & Wire Management

  • Batwing Spring Steel Clip is secured to the J-Hook using an appropriate fastener such as a bold or a rivet. The batwing clip allow for connecting to ceiling grid wire or threaded rod..
  • The J-Hook / batwing clip combination has been manufactured for heavy duty use - low voltage cable support – tested to hold up to 17lbs – up to 16 Cat 5e cables..
  • J-Hook Sizes available are 3/4 inch, 1 5/16 inch and 2 inch wide. Supports most low voltage & sensitive data cable runs including Cat 5e, Cat 6, Cat 6a, Cat 7..
  • Most popular non-continuous cable support J-Hook. Allows for easy access, upgradable cable runs without the use of conduit or trays. A wide beveled base, when spaced correctly (recommended up to 5’) minimizes creation of pressure points or kinks. cULus Listed & TIA compliant..
Check Stock