Top Conduit T Fitting Reviews

(2\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

• Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
• Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
• Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
• These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
• No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).

(1\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

• Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
• Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
• Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
• These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
• No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).

SOUTHWIRE CCPR400S Cutter, Cable RATCHETING (CCPR400S)

• Product 1: QUICKLY SPLITS: the armored jacket on #10, 12, and 14 armored cables and 3/8" flexible conduit.
• Product 1: ADJUSTABLE: cutting depth for standard and reduce diameter box/mic cables.
• Product 1: STORES: up to 6 blades in handle knob.
• Product 1: DURABLE DIE CAST EPOXY: enamled construction.
• Product 2: Conduit fitting reaming screwdriver that perfectly reams and smooths 1/2.

Wesbry Products Birdhouse Mounting Bracket - 2pack

• Easily mount birdhouses to T-posts or round posts 1" to 2" Diameter.
• For prolonged life of your birdhouses they can be quickly removed and stored inside after the nesting season..
• Can mount to 1.5" ID PVC or steel conduit and slid over a T-post. (paint the conduit for a decorative look) fasteners included..

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

• Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
• Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
• Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
• Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
• Thick formula fills gaps in large diameter pipe and loose fitting joints.
• Recommended for potable water, pressure pipe, conduit and DWV.
• Recommended application temperature 40°F to 110°F / 4°C to 43°C.

Banjo TF200SS Stainless Steel 316 Bulkhead Tank Fitting, 2\ NPT Female

TEMCo THA003 2-1/2\ Conduit Punch and Die For Hydraulic Knock Out Driver 3/4\-16 Thread

Little Giant PE-2YSA 518550 Submersible Parts Washer Pump, Black

• 1/4-Inch MNPT discharge and 1/2-Inch MNPT Master Builders conduit fitting.

Lamson E986J-CAR Carlon Access Fitting Type LB

• The product is manufactured in United states.

Wiremold Power Strips Plugmold End Feed Fitting V2010A2

• For connecting 2000 with 1/2" conduit and armored cable connectors.
• 1/2" trade size KO's on end each side and bottom.

4 in. Square Extension Ring, Drawn, 1-1/2 in. Deep with Twelve 1/2 in. KO's

• With proper fitting can be used for Conduit, NMSC, Armored, Metal Clad, Flex cable.
• Acceptable for use in two hour fire rated wall.

TEMCo TH0037 4\ Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 5 Year Warranty

• True 13 US ton hydraulic knockout punch with 10 dies. All dies have laser engraved alignment marks for easy and precise positioning. Compatible with GREENLEE and other domestic punch tooling - 3/4-16 & 3/8-23.

Manufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3

• Material:Conduit hangers are made of zinc-plated iron,durable to use..
• Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
• High-quality and durable conduit hangers with bolt..
• Used to secure and suspend EMT, rigid conduits from overhead supports..