Top Conduit Swivel Clamps Reviews

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

Clamp for PVC Pipe Greenhouses, Row Covers, Shelters, Bird Protection, 2.4 Inches Long (White,for 1/2 Inch PVC Pipe)

  • What you can get: you will receive 32 pieces clamps.
  • Appropriate size: the size of this clamp is approx. 2.4 inch in length.
  • Suitable pipe outer diameter is 1-1/2 inch.
  • Hold material on tubular frame: this clamp is made of PVC material, with nice strength and good toughness, safe and reliable, easy to remove from the greenhouse film, will not break easily.
  • Wide application: can hold many kinds of sheet materials, and suitable for various type of pipes, proper for creating cold frames, greenhouse, shelters, row covers and so on.
  • Practical tools: these clamps are compatible with many types of clamps, including PVC or metal conduit.
  • Some applications include greenhouses, row covers, shelters, bird protection, dog beds, quilting frames and more.
Check Stock

Clamp for PVC Pipe Greenhouses, Row Covers, Shelters, Bird Protection, 2.4 Inches Long (White,for 1-1/2 Inch PVC Pipe)

  • What you can get: you will receive 32 pieces clamps.
  • Appropriate size: the size of this clamp is approx. 2.4 inch in length.
  • Suitable pipe outer diameter is 1-1/2 inch.
  • Hold material on tubular frame: this clamp is made of PVC material, with nice strength and good toughness, safe and reliable, easy to remove from the greenhouse film, will not break easily.
  • Wide application: can hold many kinds of sheet materials, and suitable for various type of pipes, proper for creating cold frames, greenhouse, shelters, row covers and so on.
  • Practical tools: these clamps are compatible with many types of clamps, including PVC or metal conduit.
  • Some applications include greenhouses, row covers, shelters, bird protection, dog beds, quilting frames and more.
Check Stock

ISPINNER 12pcs 3/4 Inch PVC Pipe Straps, 2 Holes Plastic Conduit Strap for PVC Pipes, Conduit and Cables, UL Listed

  • HIGH QUALITY - These pipe straps are made from high quality PVC, sturdy and durable, anti-corrosion. The surface is super smooth and burr-free..
  • SIZE & QUANTITY - The size of the clamp is 3/4 Inch, fits for 3/4 Inch INSIDE DIAMETER pipe. Band Width 12mm, Hole Diameter 6mm, Thickness 0.4mm. Total 12pcs packed in a sturdy plastic case..
  • FEATURES - These u shape clamps are UL listed and strong enough to hold your pipe securely..
  • WIDE APPLICATION - Can be used in pipe fixing on various surfaces and support structures, great for securing conduit, PVC pipes, cables and so on..
  • WARM TIPS - These clamps' size is for the INSIDE DIAMETER of the pipe. Please check the size of your pipes and our clamps to avoid purchasing the unsuitable size. Thanks!.
Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • LOCK & HOLD YOUR PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
Check Stock

Jersvimc 20Pcs 1 Inch Stainless Steel Conduit Clamps, Two Hole Strap U Bracket Rigid Pipe Strap Metal U Clamp Conduit Strap Tension Clips U-tube Clamp Heavy Duty

  • 1️⃣[ What You Get ]: 20 x conduit clamps, which fit for 1" / 25mm pipe, screw mounting hole diameter is 0.24" / 6mm, Hole Center Distance 2.5" / 64mm,total length is 2.8" / 71mm.For specific parameters, please refer to the dimension drawing in Figure 4..
  • 4️⃣[ High-quality material ]: The metal u clamp is made of high-standard stainless steel, which is strong and durable, and has the function of corrosion and rust prevention. Even if it is used to fix the pipeline for a long time, it will not be broken and has a long service life..
  • 5️⃣[ Advance Design ]: The steel u clamp adopts a special slot design, which makes it stable and not prone to deformation. The U-shaped double-hole design is stronger than other pipe clamps on the market. The use of superb manufacturing technology makes the surface smooth and free of burrs..
  • 6️⃣[ Multi-purpose ]: The conduit bracket is very practical and can be used for fixing pipes, used for fixing pipes of wood, masonry, stainless steel pipes, plastic pipes, and oil, water and gas media in power hydraulic systems. Used in metallurgy, chemical industry, vehicle....
Check Stock

4 Pack | 6\ Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC

  • Popular Rooftop Sleeper Support Already Pre-Cut to 6" (152.4 mm) Length | Cost Effective Rooftop Pipe Support Solution.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

8 Pack | 6\ Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC

  • Popular Rooftop Sleeper Support Already Pre-Cut to 6" (152.4 mm) Length | Cost Effective Rooftop Pipe Support Solution.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

16 Pieces White Clamp for PVC Pipe Greenhouses, Row Covers, Shelters, Bird Protection, 2.4 Inches Long (for 1 Inch PVC Pipe)

  • What you can get: you will receive 16 pieces white grip clamps.
  • Appropriate size: the size of this grip clamp is approx. 2.4 inch in length, 1 inch in inner diameter.
  • Hold material on tubular frame: this white grip clamp is made of PVC material, with nice strength and good toughness, safe and reliable, easy to remove from the greenhouse film, will not break easily.
  • Wide application: can hold many kinds of sheet materials, and suitable for various type of pipes, proper for creating cold frames, greenhouse, shelters, row covers, etc.
  • Practical tools: these grip clamps are compatible with many types of pipes, including PVC or metal conduit.
  • Some applications include greenhouses, row covers, shelters, bird protection, dog beds, quilting frames and more.
Check Stock

PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

OEMTOOLS 25198 Hose Clamp Pliers Set, 2-Piece

  • Includes Flat-Band Hose Clamp Pliers and Angled Hose Clamp Pliers.
  • Thick, Double-Dipped Handles for a Comfortable and Firm Grip.
  • Services Most Ring-Type or Flat-Band Hose Clamps.
  • Jaws Swivel to Access Hose Clamps in Any Position.
  • Clamps Are Held Open with a Ratchet Locking Mechanism.
Check Stock

9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock