1-in Liquid-Tight Connector
- Superior liquid tight seal and pull out strength.
- No threading of the conduit or tubing required.
- Smooth interior surfaces for easier wire installation.
- Furnished with steel locknut and seal gasket.
Top Conduit Repair Kits With Bushing And Locknut Reviews
Klein Tools D333-8 Conduit Locknut and Reaming Pliers
- Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
- Reams and smoothes both inside and outside of conduit.
- Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
- Forged in the USA with custom, US-made tool steel for maximum durability.
Lamson E943E-CAR Carlon Male Adapter
- Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
- Performance: Flammability classification 94V-2.
- Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
- Application: Suitable for indoor/outdoor usage.
Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit
- Kit includes replacement bushing and application specific installation tools..
- Text and video instructions along with tech support make installation very easy..
- Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
MOSNAI Golf Cart Shock Bushing Kit Fits Club Car 1982&Up DS and Precedent and EZGO 1989&Up TXT Marathon Golf Cart, 4 Shock Bushing Kit for Front and Rear Shocks, Set of 4, Replaces OEM# 1011415
- Golf Cart Shock Absorber Bushing Kits. 4 Shock Bushing Kits for 2 SHOCK..
- Fits 1982-Up Club Car DS & Precedent Gas & Electric Vehicles Replaces OEM# 1011415 and EZGO 1989-Up TXT Marathon Golf Cart..
- This Shock Bushing Kit Fits All EZGO and Club Car Golf Cart with Stud Mounted Shocks..
- Durable and Easy to install like Original Bushing Replacement.
- Golf Cart Shock Bushing Kits includes 8 Rubber Bushings, 8 Retainer Washers, 4 Hex Pal Nut，4 Check Nut..
Penn State Industries PKSP105A 7mm Pen Kit Bundle #1 Woodturning Project
- This is a woodturning project kit. Pen hardware, selected bushing sets, and wood blanks only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. 7mm drill bit (PK-7MM), standard 7mm slimline bushings (PKM-BUSH3) and all other turning tools and supplies are not included..
- Includes (8) 7mm Ballpoint Twist Pen Kits, (3) Compatible Bushing Sets, and (10) 5/8" x 5/8" x 5" Cocobolo Wood Blanks (WX01-1).
- You will receive (1) of each of the following penturning kits: Premium Slimline in Gold (PK-PEN), Premium Slimline in Brushed Satin (PK-PENSAT), Premium Comfort in Gold (PKCFPEN), Premium Comfort in Brushed Satin (PKCFPENS), Designer in Gold (PKMONT224), Designer in Brushed Satin (PKMONT2S), Trimline in Gold (PKXM24), Trimline in Gun Metal (PKXMGM).
- You will receive the following (3) Compatible Bushing Sets: PKCFBUSH, PKXMBU, and PKMONT2-BU.
- Not included: Standard Slimline 7mm Bushing Set (PKM-BUSH3) needed for the Premium Slimline Kits or the 7mm drill bit (PK-7MM) needed to make all the kits.
1 Inch 90 Degree Nonmetallic Liquid Tight Electrical Conduit Conector Fitting, 4 Pack, UL Listed
- Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
- Performance: Flammability classification 94V-2.
- Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
- Application: Suitable for indoor/outdoor usage.
Ninja Fish Tape 100FT Fish Tape Wire Puller Through Conduit, Polyester Wire Threader with Changeable Leader Tip - 6mm
- 【Dimension & Material】 50/75/100 Feet Length, diameter 6mm. Our fish tape is made out of polyester, and no rust on the tape. It's lightweight, durable, not easy to break. Better than Glass fiber material.
- 【Excellent Flexibility】 This fish tape is strongly flexible. It's easy to cross through bends, even 90° angel. Running wire through the conduit in an efficient way! Use our fish tape to save you time!.
- 【Wide Usage】 For running wire through conduit, your best choice to finish difficult electric wiring installations by pulling and pushing cords through Conduit..
- 【Use with Leader Tip Kits】 We have various changeable leader tip kits, which you can use with different tips for the different workplace. You can see our "6pcs leader tip kits" by clicking the brand name "Ninja Fish Tape" after the title..
- 【Warning】 1.Electrical and Eye Injury Hazard. 2.Contact with live voltage may cause injury or death. 3.Do not use near-live Voltage. 4.Wear eye protection..
Ninja Fish Tape 100FT Polyester 3 Core Braid Pulling Fish Tape With Changeable Leader Tip in Red Winding Case, Dia 6.0mm
- 【Dimension & Material】 100 Feet Length, diameter 6mm. Our fish tape is made out of polyester, and no rust on the tape. It's lightweight, durable, not easy to break. Better than Glass fiber material.
- 【Excellent Flexibility】 This fish tape is strongly flexible. It's easy to cross through bends, even 90° angel. Running wire through the conduit in an efficient way! Use our fish tape to save you time!.
- 【Wide Usage】 For running wire through conduit, your best choice to finish difficult electric wiring installations by pulling and pushing cords through Conduit..
- 【High Impact Storage Case】 Highly durable impact case. Make the lifetime longer..
- 【Use with Leader Tip Kits】 We have various changeable leader tip kits, which you can use with different tips for the different workplace. You can see our "6pcs leader tip kits" by clicking the brand name "Ninja Fish Tape" after the title..
The Stop Shop Inverted Flare Tube Nut for 1/2\ Tube (3/4-18 Threads) (Pack of 4)
- Easy installation: 3/4" NPT female lock nut for connecting tank fittings, etc..
- Function: Precision machined threads and the relative softness of brass ensure reliable installation of the bushing reducer for a tighter seal..
- Wide range of applications: for plumbing applications and connections, for various measurable devices, collectors, garden and water connections, etc..
- Package list: 4 pieces of brass locknut washers..
Penn State Industries PKSRSS Chrome Seam Ripper Kit Starter Package Woodturning Project
- This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED SEAM RIPPERS. Blanks, drill bit, and all other turning tools and supplies are not included..
- Includes (4) Chrome Seam Ripper Woodturning Project Kits. You will receive (2) of each of the following: Single Small Blade Seam Ripper Kits in Chrome (PKSR1) and Large & Small Blade Seam Ripper Kits in Chrome (PKSR2).
- Also includes the bushing set (PKSRBU) needed to make the seam rippers.
- Minimum blank size needed to turn is 3/4" x 3/4" x 3-1/2".
- Blades are removable and reversible for protection and storage.
- The handle you 'turn' is compatible with all seam ripper, crochet, stiletto, and needle threader kits from Penn State Industries.
OTC 4542 Stinger Wheel Bearing Locknut Socket Set - 7 Piece
- 7-Piece wheel bearing locknut socket set.
- For use with 1/ 2 inch ratchet or breaker bar.
- Set contains 55 mm hex locknut socket 2-3/8 inch hex locknut socket 2-1/ 2 inch hex locknut socket 2-1/ 2 inch rounded hex locknut socket 2-3/4 inch rounded hex locknut socket 2-9/16 inch rounded hex locknut socket and 2-3/8 inch rounded hex locknut socket works.
Penn State Industries PKCP7500SS Magnum Bolt Action Ballpoint Pen Kit Starter Package Woodturning Project
- This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
- Includes (3) Magnum Bolt Action Woodturning Project Pen Kits. You will receive (1) of each of the following finishes: Chrome (PKCP7510), Gun Metal (PKCP7520), and Gold (PKCP7500)..
- Also includes the bushing set (PKCP7000BU) needed to make the pens.
- Our Magnum Bolt Action Pen kits are 10% longer and wider than our best selling 30 Caliber Bolt Action Pen Kits..