Forney 72396 Reducing Bushing Adapters for 1-Inch Thick Bench Grinding Wheels
- Reducing bushing adapter for 1-Inch thick wheels.
Top Conduit Reducing Bushing Kits Reviews
Penn State Industries PKSRSS Chrome Seam Ripper Kit Starter Package Woodturning Project
- This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED SEAM RIPPERS. Blanks, drill bit, and all other turning tools and supplies are not included..
- Includes (4) Chrome Seam Ripper Woodturning Project Kits. You will receive (2) of each of the following: Single Small Blade Seam Ripper Kits in Chrome (PKSR1) and Large & Small Blade Seam Ripper Kits in Chrome (PKSR2).
- Also includes the bushing set (PKSRBU) needed to make the seam rippers.
- Minimum blank size needed to turn is 3/4" x 3/4" x 3-1/2".
- Blades are removable and reversible for protection and storage.
- The handle you 'turn' is compatible with all seam ripper, crochet, stiletto, and needle threader kits from Penn State Industries.
Penn State Industries PKCP7500SS Magnum Bolt Action Ballpoint Pen Kit Starter Package Woodturning Project
- This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
- Includes (3) Magnum Bolt Action Woodturning Project Pen Kits. You will receive (1) of each of the following finishes: Chrome (PKCP7510), Gun Metal (PKCP7520), and Gold (PKCP7500)..
- Also includes the bushing set (PKCP7000BU) needed to make the pens.
- Our Magnum Bolt Action Pen kits are 10% longer and wider than our best selling 30 Caliber Bolt Action Pen Kits..
Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2
- LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
- Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
- Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
- The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
- These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
4L60E Shift Kit & HD Valve Body Separator Plate Combo 2001-2006
- Includes: Alto Friction Clutches, Steels, 3-4 Power Pack, Sealing Rings, Metal Clad Seals, Gaskets, Orings, Filter, Band, bushing kit, Heavy Duty Sunshell, Superior Valve Body Shit Kit, & 29 Element Sprag.
- Alto Products created extra capacity clutches known as the power pack. The powerpack adds more clutches into same factory drum, by reducing the clutch thickness, which increases your clutch apply area, giving you and increased surface area for increased clutch holding, increased surface area for increased heat absorption, and increased surface area for shorter lock-up time-decreasing “slippage’.
- High quality Clutches Made in the USA by Alto Products, and Premium Transtec or Precision Gasket Kit.
- Transparts Warehouse, Inc. Quality parts, Informative Sales team, Value you can trust..
- Our transmission rebuild kits are of the highest quality and meet all standards set by professional installers.
Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2
- LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
- Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
- Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
- The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
- These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
LEAPGOMAX Golf Cart Shock Bushing Kit Fits EZGO 1989-Up TXT Marathon Golf Cart and Club Car 1982-Up DS and Precedent Two Front/Rear Stud, Replaces OEM# 1011415
- ✅Golf Cart Shock Absorber Bushing Kits. 4 Club Car Shock Bushing Kits for 2 SHOCKS...
- ✅Fits all EZGO TXT and Club Car Golf Cart with Stud Mounted Shocks..
- ✅Fits 1982 & Up Club Car DS & Precedent Gas & Electric Vehicles Replaces OEM# 1011415..
- ✅Fits EZGO TXT 1989-Up Marathon Golf Cart..
- ✅Pacakge: 8 Rubber Bushings, 8 Retainer Washers, 4 Hex Pal Nut,4 Check nut..
Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber
- Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
- PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
- Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
- Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
- Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber
- Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
- PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
- Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
- Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
- Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Compatible With: Chevy GM Chevy GM TH400 Transmission Master Rebuild Kit Level 2
- Our transmission rebuild kits are of the highest quality and meet all standards set by professional installers.
- Includes: high energy green friction plates, steels, sealing rings, metal clad seals, gaskets, o-rings, rubber piston seals, front band, filter, modulator, pump bushing, and extension house bushing.
TH350 Alto Red Eagle and Kolene steel Deluxe Transmission Rebuild Kit Level 2
- Our transmission rebuild kits are of the highest quality and meet all standards set by professional installers.
- ALTO Red Eagle friction clutches and Kolene steels.
- Includes: Red Eagle friction plates, Kolene steels, sealing rings, metal clad seals, gaskets, o-rings, rubber piston seals, high performance Red Eagle front band, filter, modulator, pump bushing, and extension house bushing.
Penn State Industries PKCP80CSS Ceramic Bolt Action Flag Ballpoint Pen Kit Starter Package Woodturning Project
- A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS.
- Blanks, drill bit, and all other turning tools and supplies are not included.
- Includes (5) Ceramic Bolt Action Flag Ballpoint Pen Woodturning Project Kits.
- You'll receive (1) of each in Gun Metal (PKCP80CGM), Chrome (PKCP80CCH), Matte Black (PKCP80CBK), Gun Metal with Black Flag (PKCP80CBGM)), and Gold with Black Flag (PKCP80CB24).
- Also includes the bushing set (PKCP3000BU) needed to make the pens.
- Features a 3/8" single tube design, our patented bolt action mechanism, and a Parker style ballpoint black refill.
- Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/2".
- Ceramic coating provides exceptional resistance to abrasion and corrosion, yet is also smooth with a slight texture for gripping.
- Realistic bolt action handle smoothly advances and retracts to securely lock the refill in place.
- Uses the same accessories as our original 30 Caliber Bolt Action Bullet Cartridge pen kits.
OTC 4244 Freightliner Rear Suspension Bushing Tool
- OTC's Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installation/removal adapters.
- Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
- Completes the job in a fraction of the time that traditional methods take.
- Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
- No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.