Top Conduit Reducer Fittings For Indoor And Outdoor Reviews

(2\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

(1\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Thomas & Betts 12008100 1' BLUE ENT 100' COIL

  • Recognized for use with PVC rigid non-metallic conduit fittings with all size of ENT.
  • One piece ENT coupling, threaded terminator and rigid non-metallic conduit fittings are rated concrete tight without tape.
  • Flex-Plus Blue ENT is a non-metallic flexible raceway for use in walls, floors, and non-plenum ceilings.
  • Lightweight, hand bendable, and free from sharp edges which reduces installation time and saves money.
Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

Sealproof 3/4-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 3/4\ Dia, 25 Feet

  • The product is manufactured in United States.
  • All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement..
  • Rigid non-metallic conduit fittings are recommended for use with Carlon 1-1/4 in. to 2 in. Flex-Plus Blue ENT.
  • For adapting non-metallic conduits to boxes, threaded fittings and metallic systems.
Check Stock

(1 1/4\ Dia x 50 ft) HydroMaxx® Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit Kit with 2 Straight and 2 Angle Fittings Included

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling.
  • Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • Integral Rigid and Flexible PVC Construction, UL Rating 140 degrees F.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
Check Stock

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

The Lost Mage (War of the Wood Book 1)

  • UV sunlight resistant jacket, rated for temperature range of -30-Degree C to 80-Degree C, 60-Degree C Oil (-22-DegreeF to +176-DegreeF, 140-DegreeF Oil).
  • Conduit seals out water, liquids, abrasives, alcohol, coolants, corrosive fumes and gases, grease, mineral acids, petroleum oils, salt air and spray.
  • Accepts standard liquid-tight fittings for use with LFNC-B.
  • Ideal for wet and outdoor locations and direct burial.
Check Stock

Klein Tools 85091 Power Conduit Reamer with Improved Bit Retention, 1/2-, 3/4- and 1-Inch

  • Power Conduit Reamer reams 1/2-Inch (13 mm), 3/4-Inch (19 mm) and 1-Inch (25 mm) conduit and install fittings in a fraction of the time.
  • Reduce time on projects with large quantities of conduit runs.
  • Designed to fit into power drill chucks and quick release adapters with improved bit retention.
  • Includes precision engineered replaceable reaming blade.
  • Replacement blades (SKU #19353) are available and the only approved blade for use in our tool.
  • Designed to be used on Electrical Metallic Tubing (EMT).
Check Stock

STRUT 3/4\ CONDUIT CLAMP by UNISTRUT MfrPartNo RP1212EG

  • QUALITY AND DURABILITY – These 3/4-inch snap-on conduit straps are crafted from galvanized steel with a zinc coating that forms a protective layer. With its reinforced rib, this EMT one-hole pipe strap provides extra strength and durability..
  • EASY INSTALLATION – These one-hole design snap-on conduit straps are extremely simple to use. Simply snap the strap onto your conduit and use a screw to secure it onto any surface. They are perfect for both indoor and outdoor applications..
  • ACCURATE SIZES – Our Snap-On conduit straps are available in many sizes to fit many different pipes, cables, hoses, and tubes. Choose from a selection of 1/2 Inch, 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch, and 2 Inch sizes..
  • VERSATILE – These snap-on straps can be used for a wide variety of tubes or pipes that range anywhere between EMT conduits to pipes, tubes, cables, and hoses..
  • WHY CHOOSE AIRMONT PRODUCTS? ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our EMT snap-on pipe straps are especially recognized as being durable, versatile, and easy to install. Customer satisfaction is our priority. Let us know how you liked this product!.
Check Stock

EVIL ENERGY Female AN10 to Male AN8 Flare Reducer Hose Fitting Adapter Black

  • These reducer adapter hose fittings are designed to quickly make converting female connection to male. Designed for smooth flow that gives better....
  • Multi Sizes Supplied:Available in 5 sizes : Female AN6 to Male AN4 , Female AN8 to Male AN6 , Female AN10 to Male AN6 , Female AN10 to Male AN8....
  • APPLICATION- EVIL ENERGY Flare Reducer Hose Fitting is widely used in Oil/ Fuel/ Water/ Fluid/ Airline etc..
  • The hose reducer fittings are made of high-quality aluminum alloy material for strong strength. Anodised and hand polished finish add the final touch....
  • ENVIRONMENTAL FRIENDLY- Flare Reducer Fitting can be reused and recycle if you do not want them to stay in the original place. Due to the high-quality....
Check Stock

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,,UL Listed, (6 PACK) (1/2-180D)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,,UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock