Top Concrete Stud Anchor Reviews

MOUNT PRO Dual Monitor Wall Mount for 13 to 32 Inch Computer Screens, Gas Spring Wall Monitor Arm for 2 Monitors, Each Holds Up to 17.6lbs, Full Motion Wall Monitor Mount with VESA 75x75/100x100

  • ...nd stability than traditional mechanical spring. It can be adjusted to the weight of your monitor creating a suspended free-float effect. Please adjust it according to your monitor weight before use..
  • Easy Assembly- This dual arm monitor mount fits both wood stud and solid concrete walls. Please note that don't install into drywall alone. When installing this monitor VESA mount on the wood stud wall, Please don’t use the anchor in drywall or wood. While installing on the solid concrete wall, the provided anchor is needed. Comes with all necessary hardware and instructions, this wall monitor mount can be installed within 10 minutes..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

ReplacementScrews Stand Screws Compatible with Samsung UN65NU6900 (UN65NU6900FXZA)

  • Patented Design TV Mount: TV wall mounts fit most 37” - 70" TVS up to 132 lbs, with MAX VESA 600 x 400mm, supporting up to 24’’ wood stud spacing. Please check VESA, TV weight, wood studs spacing and possible blocked input. TV size is just for reference. Patent no. 29/639, 502.
  • Save Space: Low profile wall mount TV bracket place your TV close to wall 1. 5” flush profile, saving space greatly with stylish appearance.
  • Reduce Glare: Tilt your TV forward up to 8 degrees to reduce glare for better viewing.
  • Easy to Install: 3-step easy installation TV mount with decent instruction and level. All our TV mounts are not for dry wall alone! Additional concrete anchors are available through Mounting Dream team(Concrete Anchor Size: φ10x50mm). Please refer to MD2268-XL if prefer one-piece wall mount..
  • World-Class Customer Service: Our US based customer service experts are available Every day of the week to help, backed up by our leading 10-year!.
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Champ Instant Floor Plate – for Installing Floor Anchor Pots in New Concrete Slab - Professional - Made in USA

  • STRUCTURAL REINFORCEMENT – It serves as permanent ground reinforcement underneath the concrete slab. Having this plate installed improves the anchor....
  • HELPS BALANCE THE ANCHOR POT – The Champ Instant Floor Plate is the perfect base, distributing the weight of the anchor pot while keeping the anchor....
  • EASY INSTALLATION – Use when pouring a new concrete floor for added strength. Simply install the Floor Plate onto each anchor pot, set anchor pots....
  • SAVE MONEY – This floor plate, along with the anchor pot and lid, is a complete anchoring system that makes do-it-yourself installations easier and....
  • HEAVY DUTY – Whether used in permanent installations or as a floor guide, these instant floor plates are strong and reliable. It is 100% steel, and....
Check Stock

Drive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000

  • Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
  • Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
  • The washer on the anchor retains the pin and guides it during the driving installation..
  • Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
  • 304 Stainless steel is durable and rust resistant.
Check Stock

CONFAST 3/8\ Lag Shield Anchor Long (12 per Box)

  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
  • Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

VEVOR Standoff Post Base 4 x 6\(Inner Size:3.74 x 5.12\) 10 PCS Stainless Steel Adjustable Post Base Adjustable Post Anchor with Fiber Drawing Surface and Full Set of Accessories for Rough Size Lumber

  • [Anchor Your Cemented Posts]: The BISupply U-Shaped 4x4 Post Anchor Concrete Brackets 4 Pack fits standard 4 x 4-inch (10.2 x 10.2 cm) square posts.
  • (2) 3.75-inch (9.5 cm) long closed sides with predrilled screw holes and (2) 3.4-inch (8.6 cm) long open sides.
  • [Anywhere Posts are Needed]: Use as deck footing anchor, patio post holder, pergola anchor, or gazebo stabilizer for posts up to 4 feet (1.2 m) high.
  • Anchor post spike holder stands 3 inches (7.6 cm) above surface while spike end pokes 7 inches (17.8 cm) into concrete to give you 10 inches (25.4 cm) total.
  • [Install Easily]: Set the rebar spike in wet concrete before it cures and let dry for a permanent post mount.
  • Insert your wood post and install screws (not included) through the 10 predrilled holes (5 on either side) that sit approximately 2 inches (5.1 cm) apart.
  • [Built to Last]: Post hole spike anchor constructed of durable steel with a black powder coat finish for maximum longevity.
  • 0.6-inch (1.6 cm) diameter rebar spike adds strength and stability.
  • [Package Contents]: Wood post anchors package includes 4 individual post holder deck brackets.
  • Wooden posts and installation screws not included.
Check Stock

Titan Fitness Wall Mounted 4-Peg Olympic Bumper Plate Weight Rack Storage

  • Dual anchor points in a wall stud and floor allow for a high weight capacity..
  • Dual anchor design reduces the stress on your wall stud. Ideal for drywall mounting..
  • Four posts design for ample plate storage..
  • Angled design leans against the wall instead of pulling away from it..
  • Store four of our 45 pound plates per post with room to spare..
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock