Top Concrete Screw And Bolt Assortment Reviews

T.K.Excellent Phillips Pan Head Self Tapping Screws and Ribbed Anchors Assortment Screws Kit,400Pcs

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power.
  • Plastic material expansion sleeve low cost, no rust, corrosion resistance, anti-aging, good toughness.
  • Once anchor installed, they provide a flush, clean appearance in drywall.
  • Toggle bolt's wings spreads the force over the bearing surface, comes attached to a screw, use in concrete and brick.
  • Kit includes:anchors:#6-#8,#10-#12,#12-#14.
Check Stock

T.K.Excellent Plastic Self Drilling Drywall Ribbed Anchors with Phillips Pan Head Self Tapping Screws Assortment Kit,66 Pieces

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw,increased holding power.
  • Toggle bolt's wings spreads the force over the bearing surface,comes attached to a screw,use in concrete,brick.
  • Once anchor installed,they provide a flush,clean appearance in drywall.
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • ...ches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
  • Install the base plate on a stable concrete slab under the area you wish to support.
  • Use the mounting holes on top and bottom plates to bolt jack to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses with these adjustable floor jacks.
  • Use as basement support posts, ceiling jacks, crawl space support jacks, or screw jacks home leveling post floor jack.
  • Not designed for use as permanent supports.
Check Stock

Hilitchi 295-Pcs [#4 - #16] Finishing Cup Countersunk Washer Assortment Set - 304 Stainless Steel

  • 【✔】High Quality 304 Stainless Steel Finishing Cup Washer Assortment Kit.
  • 【✔】Made of 304 Stainless Steel Material, Very Good Corrosion Resistance, It Can Be Used in a Humid Environment.
  • 【✔】Set Includes 7 Most Used Sizes: #4 #6 #8 #10 #12 #14 #16【Please See Picture 2 for Specific Dimensional Size】.
  • 【✔】Package Quantity: 295-Piece, All of Washers Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【✔】Prevents a nut, bolt or screw from pulling through the material, finish washers are designed to accommodate the heads of a countersuck screw in order to provide a finished appearance.
Check Stock

Hilitchi 304 Stainless Steel [#4 - #16] Finishing Cup Countersunk Washer Assortment Set - 160 Pieces

  • 【✔】High Quality 304 Stainless Steel Finishing Cup Washer Assortment Kit.
  • 【✔】Made of 304 Stainless Steel Material, Very Good Corrosion Resistance, It Can Be Used in a Humid Environment.
  • 【✔】Set Includes 7 Most Used Sizes: #4 #6 #8 #10 #12 #14 #16【Please See Picture 2 for Specific Dimensional Size】.
  • 【✔】Package Quantity: 160-Piece, All of Washers Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【✔】Prevents a nut, bolt or screw from pulling through the material, finish washers are designed to accommodate the heads of a countersuck screw in order to provide a finished appearance.
Check Stock

QUALIHOME Spring Toggle Bolt Assortments Kit - Toggle Drywall Anchors Kit for Hanging Items w/Hollow Walls & Ceilings - 1/8” x 2” 3/16” x 3’’ 1/4” x 3 Sheetrock Anchor for Frames Shelves & More

  • Sturdy Toggle Bolts: Need to hang something heavy on the wall? Spring toggle bolt anchors are what you need! Toggle bolts for drywall As they can support twice as much load in a smaller hole than regular wing anchors, our toggle bolts are the most reliable anchors for plaster, concrete, hollow, drywall, & more.
  • Heavy-Duty Steel Material: Our wall anchors are made of high-quality steel, This sheetrock anchor offers strength, durability, and good resistance to rust and corrosion and great option for picture hanging anchors. Unlike plastic, our steel anchor bolts won't crack when tightened, can support heavier weights, and will retain their stability.
  • Spring Wing Design: The plaster wall anchor’s two-piece fastening system consists of a strong screw and a foldable spring wing toggle. With the wings that open inside the wall, the weight of the fastened object is evenly distributed across a large surface, making  wall anchors for shelves a reliable choice for securing heavy items to walls..
  • Easy To Install: Installing the heavy-duty wall anchors is a breeze! We have included DIY instructions for easily installing sheetrock anchors.
  • no special skills are required. To install, first make a hole using a screwdriver/drill, insert the toggle bolt through ....
Check Stock

Arrested Development

  • STRONG FIXED ABILITY - Our concrete wall anchors are made of high quailty plastic. Combined with lag bolt sturdily on the concrete or brick wall..
  • WIDE APPLICATION - Need to mount your TV on concrete or brick wall but no anchors? Our anchors for concrete or brick wall can help you..
  • EASY INSTALLATION - With the corresponding hole in the wall, it is easy to hammer the anchor bolt into the wall..
  • BASIC INFORMATION - Rod Diameter: 10mm/3/8”, Total length: 50mm/2”. Package Content: 6 pcs concrete wall anchors in one pack..
  • WORLD-CLASS CUSTOMER SERVICE - Our customer service team is glad to provide support on pre-purchase or installation problems for customers at any time..
Check Stock

DIY.TK Plastic Self Drilling Drywall Ribbed Anchors with Phillips Pan Head Self Tapping Screws Assortment Kit,66 Pieces

  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw,increased holding power.
  • Toggle bolt's wings spreads the force over the bearing surface,comes attached to a screw,use in concrete,brick.
  • Once anchor installed,they provide a flush,clean appearance in drywall.
  • Kit Includes:E6,E7,E8 anchors, #6x1",#8x1-1/4",#10x1-1/2"pan head self-tapping screws(ANSI) ,and a plastic case.
  • Plastic(nylon) material anchors,no rust,corrosion resistance,anti-aging,good toughness and can be easily removed.
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • ...extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses with these adjustable floor jacks.
  • Use as basement support posts, ceiling jacks, crawl space support jacks, or screw jacks home leveling post floor jack.
  • Not designed for use as permanent supports.
Check Stock

(8 Sets) 1/4-20 x 5\ Grade 5 Hex Bolts w/Washers & Nuts - Choose Size

  • THE PERFECT HARDWARE ASSORTMENT: This type of bolt, nut, and washer assortment gives you everything that you need in bulk. When you are working on a project you won’t have to stop to purchase a tool, instead you’ll already have the type and size of the bolt, nut, or washer that you need right in front of you. Our hardware is made with high end stainless steel materials, ensuring a strong hold for practically any use, whether you are using them professionally, or in the comfort of your own home..
  • NUTS, BOLTS, & WASHERS: Fasteners come in many different forms, this set in particular contains three main types. One type is bolts, which are fasteners that require a nut (the second type) or pre-tapped hole to be installed. The third type is washers. This set includes lock and flat washers, which are used to distribute loads of threaded bolts, screws, and nuts evenly as the fastener is tightened. This assortment’s nuts, bolts, and washers can all be used in cohesion with one another..
  • A VARIETY OF SIZES: This bolt, nut, and washer set comes with all of the types of hardware and sizes that you need to complete your project with ease! In fact, the entire set includes over 1,200 pieces, plus a box to store everything in. The sizes of the cap screws range i....
Check Stock

El Tornillo Y La Tuerca

  • ...er Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2", 25pcs 8-32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To Use And Storage, More Tidy] 100% brand n....
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • ...extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses with these adjustable floor jacks.
  • Use as basement support posts, ceiling jacks, crawl space support jacks, or screw jacks home leveling post floor jack.
  • Not designed for use as permanent supports.
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • ...tends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses with these adjustable floor jacks.
  • Use as basement support posts, ceiling jacks, crawl space support jacks, or screw jacks home leveling post floor jack.
  • Not designed for use as permanent supports.
Check Stock