Top Concrete Screw And Anchor Assortment Reviews

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

CONFAST® #10-12 Plastic Conical Blue Bantam Drywall Wall Anchor Kit PAK1012 Includes 100 Anchors 100 Screws and 1 Drill bit 201 Pieces

  • Great for many light-duty uses - Install doorbells, curtain rods, pictures, light mirrors, photo frames, lights in drywall, plaster board, gypsum board, brick wall, concrete wall or wood wall.
  • Easy to Install - use included bit to drill hole, insert the anchor, and place the item against the wall over the anchor, then drive the screw through the hole in to the anchor.
  • Designed to prevent problems during installation - ribs prevent anchor from spinning in the hole while tightening the screw.
  • Plast Anchor material protects against rust and corrosion.
  • Contains ( 1 ) drill bit, ( 100 ) #10-#12 plastic, ribbed anchors, ( 100 ) #10 Phillips head screws.
Check Stock

Concrete Anchors and Screws Kit 100Pcs Masonry Anchors and 100Pcs Masonry Screws with 1Pcs Corresponding Bit Blue Conical Anchors and Self Tapping Screws for Stucco Concrete Masonry Brick Wall

  • Premium materials: All the concrete anchors and screws are made of durable materials,The concrete screws are made of carbon steel and galvanized, Will not rust or corrode. and the thick PE material anchor is not easily worn and aged.
  • Convenient Installation: The masonry anchors and screws kit come with corresponding size drill bit, You can use it to drill just the right size hole on the wall, then knock the anchor in, and finally screw the screws in, without you having to think extra about what size tool to use.
  • Commonly used size: The #10 concrete screws is 35mm long, the concrete anchors is 36mm,it's not too long and not too short,It's suitable for you mount stuffs such as doorbells, curtain rails, pictures, mirrors, photo frames and lanterns on brick walls, concrete walls, drywalls, wooden walls and more.
  • Well Packed: The wall anchors and screws kit are well organized by a exquisite plastic gird box,very space-saving,and very convenient for you to use and save the screws and anchors..
  • Package Content: 100pcs screws,100Pcs screw anchors,1 Drill Bit..
Check Stock

Akord Anchor Plastic Assortment Kit 130PCS, Nylon Mushroom Head, Wall Anchors and Screws for Drywall Anchors, Hollow Wall, Concrete Anchors, 2 Types & 8 Sizes Different Specifications, 65 Set

  • MORE SIZES AND CHOICES: Anchor Plastic Assortment Kit has 2 Types & 8 Sizes Nylon Mushroom Head Anchor. You will have different specifications anchors for hollow wall, which can solve different problems..
  • PRODUCT FEATURES: Constructed of high-quality materials for long-lasting durability. Can Be Hammered All The Way Into the Hole Without Pre-Expansion, Nylon Body Provides Insulation Between Drive Screw and Work Surface..
  • MULTI PURPOSE: Designed for Use in A Variety of Substrates Such as Concrete, Stone, Solid Brick, Solid Block, Hollow Brick, Hollow Block and Hollow Slab, Quick and Easy to Install and Remove..
  • HANDY BOX: All of the Anchors will be packed in a sturdy plastic box, can be used as a storage box. Not only give you the best Anchors, but also the best storage system..
  • 30 DAYS REFUND WARRANTY: AKORD offers a free replacement or refund against any manufacturer defects. Please feel free to contact us if you have any questions about our products..
Check Stock

3/8\ x 2 1/2\ Lag Screw Expansion Shield Long Zinc Alloy Pk 300

  • Expansion shield anchor works with a lag screw to provide a secure hold in most materials including solid masonry, masonry joints, and uncracked concrete.
  • Anchor has an internally threaded body made of zamac alloy.
  • Meets Fed. Spec. GSA FFS-325C Group 2, Type 1, Class 2C specifications.
  • Ultimate tensile strength 420 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Plastic Wall Conical Anchors for use in Drywall, Hollow Walls and Concrete, Brick, or Masonry 10-12 X 1-Inch, 100-Pack

  • Horizontal fins prevent anchor from turning while screw is put in, Anchor expands and shims the screw.
  • For use in both hollow walls and concrete, brick, or masonry, Very high ease of use.
  • Also known as "Bantam" anchors. Kit Include a 100 #10-#12 blue anchors.
  • 1/4" Drill Size. Once anchor installed, they provide a flush, clean appearance in wall. Packaging design may vary..
Check Stock

VEVOR Standoff Post Base 4 x 6\(Inner Size:3.74 x 5.12\) 10 PCS Stainless Steel Adjustable Post Base Adjustable Post Anchor with Fiber Drawing Surface and Full Set of Accessories for Rough Size Lumber

  • [Anchor Your Cemented Posts]: The BISupply U-Shaped 4x4 Post Anchor Concrete Brackets 4 Pack fits standard 4 x 4-inch (10.2 x 10.2 cm) square posts.
  • (2) 3.75-inch (9.5 cm) long closed sides with predrilled screw holes and (2) 3.4-inch (8.6 cm) long open sides.
  • [Anywhere Posts are Needed]: Use as deck footing anchor, patio post holder, pergola anchor, or gazebo stabilizer for posts up to 4 feet (1.2 m) high.
  • Anchor post spike holder stands 3 inches (7.6 cm) above surface while spike end pokes 7 inches (17.8 cm) into concrete to give you 10 inches (25.4 cm) total.
  • [Install Easily]: Set the rebar spike in wet concrete before it cures and let dry for a permanent post mount.
  • Insert your wood post and install screws (not included) through the 10 predrilled holes (5 on either side) that sit approximately 2 inches (5.1 cm) apart.
  • [Built to Last]: Post hole spike anchor constructed of durable steel with a black powder coat finish for maximum longevity.
  • 0.6-inch (1.6 cm) diameter rebar spike adds strength and stability.
  • [Package Contents]: Wood post anchors package includes 4 individual post holder deck brackets.
  • Wooden posts and installation screws not included.
Check Stock

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

Concrete Anchors and Screws Kit 100Pcs Masonry Anchors and 100Pcs Masonry Screws with 1Pcs Drill Bit Blue Conical Anchors and Self Tapping Screws for Stucco Concrete Masonry Brick Wall

  • Premium materials: All the concrete anchors and screws are made of durable materials,The concrete screws are made of carbon steel and galvanized, Will not rust or corrode. and the thick PE material anchor is not easily worn and aged.
  • Convenient Installation: The masonry anchors and screws kit come with corresponding size drill bit, You can use it to drill just the right size hole on the wall, then knock the anchor in, and finally screw the screws in, without you having to think extra about what size tool to use, concrete anchors and screws kit make your installation easier.
  • Commonly used size: The #10 concrete screws is 35mm long, the concrete anchors is 36mm,it's not too long and not too short,It's suitable for you mount stuffs such as doorbells, curtain rails, pictures, mirrors, photo frames and lanterns on brick walls, concrete walls, drywalls, wooden walls and more.
  • Space saving storage: This drywall anchors and screw kit comes in a beautiful clear plastic storage box that helps you keep all the anchors and screws safely stored and well while taking up only a little space. The clear box also makes it easy to choose the wanted screws and anchors.
  • What you get – The package includes 1 drill bits, 100pcs of high-quality wall anchors, 100pcs head ....
Check Stock

Xth-Nth Wall Anchor Setting Tool for Molly Bolts, Wall Anchor Fixing Gun Metal Setting Tool for Hollow Wall Cavity Anchor Plasterboard Fixing with 32 Pieces Molly Bolt

  • ✅【MATERIAL】The anchor gun is made of heavy duty solid metal with non-slip rubber grips. Molly bolts are made of high quality zinc plated carbon steel with high hardness, wear resistance and rust resistance..
  • ✅【WHAT YOU GET】This assortment kit includes 1pc anchor setting tool and 5 sizes molly bolt for you to deal with multiple different drywall. It includes M4x32mm(4pcs), M4x60mm(4pcs), M5x52mm(4pcs), M5x65mm(4pcs), 6x52mm(2pcs), total 18pcs with 1pc anchor gun..
  • ✅【EASY TO USE】The heavy duty gun is used to accurately and quickly set the hollow wall fixing parts into the hollow wall. The molly bolt will expand during installation, which provides strong load-bearing capacity and safety..
  • ✅【NEATLY PACKING FOR EASY SELECTION】The assortment kit comes with a convenient case. Clear plastic case makes it easy to find correct anchors quickly, saves your time of running around looking for a particular size anchor..
  • ✅【WIDE APPLICATION】Works well on concrete walls, drywall surfaces, brick walls, sheetrock, plaster and wood. Great for hanging small pictures , heavy paintings, mirrors, clock, picture frames, towel rack and lightings..
Check Stock

QUALIHOME Spring Toggle Bolt Assortments Kit - Toggle Drywall Anchors Kit for Hanging Items w/Hollow Walls & Ceilings - 1/8” x 2” 3/16” x 3’’ 1/4” x 3 Sheetrock Anchor for Frames Shelves & More

  • Sturdy Toggle Bolts: Need to hang something heavy on the wall? Spring toggle bolt anchors are what you need! Toggle bolts for drywall As they can support twice as much load in a smaller hole than regular wing anchors, our toggle bolts are the most reliable anchors for plaster, concrete, hollow, drywall, & more.
  • Heavy-Duty Steel Material: Our wall anchors are made of high-quality steel, This sheetrock anchor offers strength, durability, and good resistance to rust and corrosion and great option for picture hanging anchors. Unlike plastic, our steel anchor bolts won't crack when tightened, can support heavier weights, and will retain their stability.
  • Spring Wing Design: The plaster wall anchor’s two-piece fastening system consists of a strong screw and a foldable spring wing toggle. With the wings that open inside the wall, the weight of the fastened object is evenly distributed across a large surface, making  wall anchors for shelves a reliable choice for securing heavy items to walls..
  • Easy To Install: Installing the heavy-duty wall anchors is a breeze! We have included DIY instructions for easily installing sheetrock anchors.
  • no special skills are required. To install, first make a hole using a screwdriver/drill, insert the toggle bolt through ....
Check Stock

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock