Top Concrete Masonry Unit Reviews

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

All Purpose Concrete Brick & Stone Sealer 2.5 Gallon Clear Penetrating Waterproofer for Porous Exterior Brick Concrete Stone Cultured Stone Sandstone Limestone & Granite Siloxane Sealer

  • Clear, Water Repellent Protection for All Exterior, Porous Masonry & Concrete Surfaces Including Concrete, Brick, Natural Stone, Sandstone, Limestone,....
  • Waterproofs and Protects Masonry & Concrete Surfaces from Water Damage & Freeze/Thaw Damage.
  • 100% Breathable - Doesn't Form a Film, Allows Trapped Moisture to Escape Which Prevents Pitting, Cracking & Delaminating.
  • Water-Based - Soap & Water Cleanup, Low Odor.
  • 5 Year Warranty on Vertical Concrete & Masonry Surfaces.
Check Stock

Bestar Cielo Queen Murphy Bed with 1 Storage Unit and Drawers, Gray & White

  • For installation and to avoid risk of injury, use only a professional or qualified person with knowledge of the wall structure, studs, and components. Bed may be attached to wood studs, metal studs, or masonry wall structures.
  • masonry requires use of concrete screws (not provided)..
  • Bundle includes: 65W Queen Murphy Bed, 19.5W Low Storage Unit, 19.5W Floating Shelves, 2 Drawer Set for Cielo 19.5W Closet Organizer.
  • Quality laminated particle board compliant with TSCA Title VI for a long-lasting finish.
  • Dual piston system allows you to fold the bed up and down safely and quickly.
  • Decorative brushed nickel handle and 2 CSA-approved LED lights (120 V) for a modern look.
Check Stock

All Purpose Concrete, Brick & Stone Sealer, Clear Penetrating Water Sealant for Porous, Exterior, Brick, Concrete, Stone, Cultured Stone, Sandstone, Limestone & Granite Siloxane Sealer, 1 Gallon

  • Clear, Waterproofing Protection for All Exterior, Porous Masonry & Concrete Surfaces Including Concrete, Brick, Natural Stone, Sandstone, Limestone, Cultured Stone (Stone Veneer/Manufactured Stone), Granite, and More.
  • Waterproofs and Protects Masonry & Concrete Surfaces from Water Damage & Freeze/Thaw Damage.
  • 100% Breathable – Doesn’t Form a Film, Allows Trapped Moisture to Escape Which Prevents Pitting, Cracking & Delaminating.
  • Water-Based – Soap & Water Cleanup, Low Odor.
  • 5 Year Warranty on Vertical Concrete & Masonry Surfaces.
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
Check Stock

Thoro T1180 Gry Seal Foundation Coating, 50 lb

  • Waterproofs exterior below grade concrete or masonry.
  • Apply with a push broom or a 6” masonry Brush.
  • Cleans up with soap and water immediately after use. Recommended for: Concrete, masonry, basement walls, foundation and retaining walls. Coverage: Base Coat: 225 square feet at 1/16 IN dry-film thickness.
  • Top Coat: 450 square feet at 1/32 IN dry-film thickness. Coverage will vary depending on surface texture and porosity.
Check Stock

14\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry 12mm Segment Height

  • MULTIPURPOSE - 14" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind..
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone. Not recommended for reinforced concrete and asphalt and green concrete..
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

DEWALT D25810K SDS MAX Chipping Hammer 12lb

  • 7.1 j's of impact energy provides the power for chiseling work on concrete and masonry walls..
  • SHOCKS - active vibration control reduces vibration felt by the user at the handles. A perform and protect feature..
  • Optimized Mechanism and Motor system to provide fast chiseling work on concrete and masonry walls, plaster and tiles, walls and floors, concrete....
  • Low vibe side handle for comfort during extended working intervals.
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

Dremel US410-01 Ultra-Saw 4-Inch Diamond Surface Prep Abrasive Wheel , Green

  • Diamond chip technology for high performance surface preparation..
  • Ideal applications include concrete, tile, brick, masonry and cement..
  • Accessory is compatible with all Dremel corded and cordless Ultra Saw tools..
  • Quickly smooth bumps and cracks in concrete before finishing and to remove thinset mortar for tile remodeling..
  • Use your Ultra-Saw for concrete, masonry and tile surface preparation.
Check Stock

Sabre Tools 1/4 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 5-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (1/4” x 6”, 5)

  • 1/4” x 4” x 6" Masonry hammer drill bits 5 pack set – Ideal for use with Tapcon concrete screws.
  • 1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock