Top Concrete Masonry Block Reviews

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

CONFAST 3/8 x 6 Flat Sleeve Anchor Zinc Plated 25 per Box

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block.
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials.
  • PRE-ASSEMBLED - Ready to install no separate parts required.
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs.
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

4-1/2\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\-5/8\ Arbor

  • MULTIPURPOSE - 4.5" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

7\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\ Bushing w/Diamond Arbor

  • MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

5/16\-18 Double Expansion Shields (Pack of 12)

  • Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts.
  • Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit.
  • Used in soft masonry with machine screws or machine bolts.
  • Can also be used in harder materials, including stone, brick, concrete or block.
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

1/4 Tapcon Style Concrete Screws Slotted Hex Washer Head Concrete Screws to Anchor Masonry Block & Brick 1/4 x 1-3/4 Qty 1000

  • Slotted Hex Washer Head Masonry Screws - 1/4 inch Diameter.
  • Commonly used to anchor fixtures to brick, block or concrete.
  • Blue Climaseal Coating for Corrosion Resistance & Durability.
  • Cuts its own threads into concrete and other masonry materials.
  • Does not include masonry bit for pilot hole.
Check Stock

3/16 Tapcon Style Concrete Screws Slotted Hex Washer Head Concrete Screws to Anchor Masonry Block & Brick 3/16 x 1-1/4 Qty 1000

  • Slotted Hex Washer Head Masonry Screws - 3/16 inch Diameter.
  • Commonly used to anchor fixtures to brick, block or concrete.
  • Blue Climaseal Coating for Corrosion Resistance & Durability.
  • Cuts its own threads into concrete and other masonry materials.
  • Does not include masonry bit for pilot hole.
Check Stock

Sabre Tools 1/4 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 5-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (1/4” x 6”, 5)

  • 1/4” x 4” x 6" Masonry hammer drill bits 5 pack set – Ideal for use with Tapcon concrete screws.
  • 1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

Sabre Tools 3/16 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 10-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (3/16” x 6”, 10)

  • 3/16” x 4” x 6" Masonry hammer drill bits 10 pack set – Ideal for use with Tapcon concrete screws.
  • 1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
  • High quality masonry drill bits designed to work in.
  • Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
  • Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.
Check Stock

Diamond Saw Blade 10, Dry or Wet timeriver Masonry Blade 10 Inch, Hot Pressing Process, High Durability, Tile Blade 10 Inch is Suitable for Cutting Masonry, Retaining Wall, Granite, Marble, Concrete.…

  • MULTIPURPOSE - 10" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

Sabre Tools 10-Pack SDS Plus 3/16\ x 6\ Rotary Hammer Drill Bits, Carbide Tipped for Brick, Stone and Concrete

  • 3/16” x 4” x 6" SDS plus drill bit 10 pack set – Ideal for use with Tapcon concrete screws.
  • High quality SDS masonry hammer drill bits designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Our SDS drill bits haExtended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock