Top Concrete Core Drills Reviews

Professional Wet Drill Core Bits for Reinforced/Hard Concrete,Hard Aggregate, Brick, and Block (.440” Segment) 1-1/4"-7 Threaded Arbor (11", 18 inch)

  • ...properly laser welded on premium steel core for unrivaled drilling performance. The lowest vibration of drill bit ensures that the structures are not harmed during drilling operation..
  • MULTIPURPOSE USE: The CD200 Core Drill Bit is specially designed for drilling higher PSI concrete, concrete with high level of rebar reinforcement, granite, brick, marble, and other masonry materials under situations such as installing plumbing infrastructures and air conditioners, water-electric installations, pipelines, stair railings, roads, and irrigation systems, among others..
  • COST EFFECTIVE: Mesa Diamond Core Bit CD200 gives the best performance functionality to operations at the lowest cost and fastest speed due to the diamond's unique structure, which allows it to drill speedy and precise holes on the roughest flooring..
  • %100 MANUFACTURER GUARANTEE: Mesa Diamond Premium Core Drill Bit CD200, which have been utilized in the industry for 35 years, tested and authorized all over the world. As a manufacturer, we provide reliable diamond products guarantee..
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 40 65 80 100 125 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 110mm and SDS MAX 160mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 30 40 65 80 100 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 300mm and SDS MAX 300mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

REETAI-FOUR 17 PCS SDS Plus Rotary Hammer Drill Bits & Chisels Set, Concrete Masonry Hole Tool with Storage Case,Carbide Tipped for Brick, Stone and Concrete.

  • [PACKAGE INCLUDED]: 13×Drill Bits, 1×Point Chisel, 2×Flat Chisel, 1×U-groove Chisel, A variety of sizes to meet your different needs..
  • [INDUSTRIAL MATERIALS]: 40Cr carbon steel, YG8 carbide tip, sturdy and durable.Premium carbon steel with heat treatment improves core strength for maximum durability and extended life..
  • [MULTI PURPOSE]:This set is perfect for working on concrete, masonry, wall, bricks, stone and road..
  • [EASY TO USE]: The SDS PLUS shank is suitable for most rotary hammer drills and meets most of your needs. SDS chisel matches the electric hammer drill , such as Bosch, Hilti, Milwaukee, Makita, Dewalt drills and other SDS/SDS Plus drills, etc..
  • [CARRY CASE] : Supplied in a light, portable plastic case for easy transport and storage.All the bits and chisels are fixed in the slots in the case.If you have any question about product, please feel free to contact us by email or Q&A, the reply will be provided within 24 hours..
Check Stock

NewShark Concrete Drill Bit Set 10PCS, Masonry Drill Bits for Brick, Glass, Plastic and Wood, Tungsten Carbide Tip Work with Ceramic Tile, Wall Mirror, Paver on Concrete or Brick Wall（3/16”-1/2” ）

  • 【SIZES OF MASONRY DRILL BITS】Includes these 3.8”~4.8” in length: 2× 3/16” (5mm), 4× 1/4” (6mm), 2× 5/16” (8mm).
  • 1×3/8” (10mm) and 1× 1/2”(12mm). Easily meet your drill needs..
  • 【HIGH-QUALITY MATERIALS】Made of high-quality carbide YG6X alloy, the rust-resistant treatment and reinforced head prevent the drill from cracking and provide longer service life..
  • 【SILKY DRILLING】Carbide YG6X concrete drill bit set is sharper, double design of cross arrow and spiral groove, accurate positioning, easy chip removal, and easy penetration of various materials..
  • 【EASY TO INSTALL AND USE】1/4 Inch Hex Shank Masonry Drill Bit Set with Locking Quick Change Collet for most common drills, power drills, hand drills and bench drills, easy to install and remove, more secure..
  • 【WIDE APPLICATION】 Concrete drill bit set, ideal for drilling holes in bathroom tiles or walls, bricks, wood, glass, stainless steel, concrete, etc. （Remember to add water or coolant when drilling）.
Check Stock

REETAI-FOUR 9Pcs SDS Plus Concrete Hole Saw Kits, Tungsten Carbide Wall Hole Cutter Cement Stone Drill Bit Sets with Connecting Rod for Brick Stone Concrete Cement.

  • PREMIUM MATERIAL: The concrete hole saw set is made of high quality tungsten steel and carbide, which is high wear-resistant and durable. From the selection of raw materials to the production, we have carried out strict screening and monitoring. And this hole saw set will provide years of service even under severe use..
  • PACKAGE INCLUDED: 5 PCS Hole Opener：1-2/11”(30mm), 1-3/5”(40mm), 2-9/16 “(65mm), 3-5/32”(80mm), 3-15/16”(100mm).
  • 2PCS SDS connecting rod: SDS 11-13/16”(300mm), SDS max 11-13/16”(300mm).
  • 2 PCS center drill bit 4-1/3”(110mm), which let you quickly punch clean holes in the most commonly needed sizes..
  • SHARPER BLADE: Our concrete hole saw kit feature a unique blade design, coupled with high-quality and tough raw material, which is thicker and sharper than other common blades. The multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole and inner groove can quickly remove dust, thus preventing clogging..
  • FOR MOST HAMMER DRILLS: The shank of the connecting rod adopts SDS PLUS design, which is compatible with four-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
Check Stock

Masonry Drill Bits Set - HPHOPE 10 Pcs Concrete Drill Bit Set for Tile, Brick, Glass, Plastic and Wood, Tungsten Carbide Tip Work with Ceramic Tile, Wall Mirror, Paver on Concrete or Brick Wall

  • 【Sizes of Masonry Drill Bits】Includes these: 2 * 3/16" (4.7mm), 4 * 1/4" (6.3mm), 2 * 5/16"(8mm), 3/8" (9.5mm), 1/2" (12.7mm). Easily meet your drill needs.
  • 【Alloy YG6S】Carbide drill bit is made of industrial-grade alloy YG6S, which is more advanced than YG6X, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
  • 【Silky Drilling】Carbide YG6S concrete drill bit set is sharper, double design of cross arrow and spiral groove, precise positioning and easy chip removal, easy to penetrate various materials.
  • 【Easy to Install and Use】1/4 inch hex shank masonry drill bit set with lock-in quick change chuck, suitable for most common drills, electric drills, hand drills and bench drills, easy to install and remove and more secure.
  • 【Wide Application】Concrete drill bit set, ideal for drilling holes in bathroom tiles or walls, can easily drill holes in tile, concrete, brick, glass, ceramic, granite, wood. To reduce cracking, use water to cool and control the speed of drilling.
Check Stock

DKIBBITH 1 Inch Dry Diamond Core Drill Bits, 25mm Tile Vacuum Brazed Angle Grinder Hole Saw for Porcelain Ceramic Granite Brick Concrete with 5/8-11 Thread to 3/8” Hex Shank Adapter, Black

  • 1″ Dry Diamond Core Drill Bit – Great tool to add to your collection for cutting holes for split AC units plumbing, shower/tub grab bars, shower plumbing, faucet and more projects.
  • Work with Angle Grinders and Electric Drills – Package including a 1 Inch Diamond Hole Saw with 5/8-11 female thread for most Angle Grinders, as well as an arbor to 3/8” Hex Drill Shank which can fit in Power Drills..
  • Excellent Hole Saw for Rough Materials – Fast clean cut through stucco, bricks, concrete, ceramic tile, porcelain, tabby stone, brick, mortar, granite, marble, quartz, etc. Both Dry and Wet will do, and vac will be helpful for dry drilling.
  • Sharp and Durable – Vacuum Brazed Diamond Core Bit chews through materials with ease and minimal wear.
  • stays sharp longer than other masonry hole saw bits as long as taken good care to cool sufficiently.
  • User Tips – When starting the hole, tilt the high-speed bit at a 45-degree angle to touch the surface, then slowly move the drill back upright and let the tool do the cutting, you will have minimal bit walking and create smooth.
Check Stock

COMOWARE Rotary Hammer Drill Bits Set & Chisels- SDS PLUS Concrete Masonry Hole Tool 17pcs with Storage Case

  • PROFESSIONAL AND WIDELY USE: Compared with percussion drills, electric hammer drills can generate stronger impact force lightly, allowing for effective and precise drilling. Before using the hammer drill, you can use a chisel to make a point of strength, and then combine the hammer drill to meet your processing needs..
  • HIGH QUALITY CARBIDE MATERIAL: It is featured in a harder YG8 Carbide tip and carbide steel body. The robust head is ideal for high impact applications. It allows for precise starts in materials such as reinforced concrete..
  • UNIVERSAL CONNECTION DESIGH: The SDS – PLUS shank is suitable for most rotary hammer drills on the market and meets most of your needs. SDS chisel matches the electric hammer drill to punch hole for concrete, brick and wall, cut and chisel groove..
  • MULTIFUNCTIONAL USING: The bit set includes 13pcs drill bits with 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 9/16″, 5/8″, 1 Point Chisel, 2 Flat Chisel and 1 U-groove Chisel..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a plastic index case, convenient to use and carry..
Check Stock

2-1/2\ Diamond Dry Core Bit for Brick and Block with SDS Plus Pilot Bit Adapter, 9.5\ Drilling Depth, 5/8\-11 Arbor

  • CORE DRILLING - diamond core bits are designed for soft brick or building block.
  • PILOT BIT ADAPTER - includes SDS Plus pilot bit adapter to fit SDS Plus core drills.
  • USE WET OR DRY - recommended to use with dedicated core drills or core drill rigs.
Check Stock

9 Piece Carbon Steel Hammer Drill Bit Set, SDS Carbide Drill for Bricks Masonry Concrete Cement Stone Rocks etc

  • ✔Cross type Carbide Tip Suitable for many electric drills and drills, Perfect for drilling holes in concrete.
  • ✔Quantity:This set includes 9 pieces drill bit in different sizes of the most popular drill bits.1 pc/per size..
  • ✔Hammer drill bit set provides better stability and balance during quick operation to ensure position is intact.
  • ✔Application:drill bits kit are great for most drilling jobs and materials such as aluminum, wood, concrete, stone, rocks and other different materials or your daily drill use..
  • ✔Diameter: 5mm(3/16") 6mm(1/4") 6mm(1/4") 8mm(5/16") 8mm(5/16") 10mm(3/8"), 12mm(1/2") 14mm(9/16") 16mm(5/8").Length:about 160mm(about 6.3 inch).
Check Stock

KSEIBI Variable Speed Rotary Hammer Drill 1-1/4 inch, SDS Plus Demolition Hammer for Concrete Drill 13Amp, 4 Functions Reduced Vibration System

  • MAX POWER PERFORMANCE L-shaped SDS drill with a powerful 13 Amp motor with 7 Joules Impact Rate with SDS Plus function let you finish any projects on Masonry, Concrete, Brick, Stone etc. or you can use the extra chuck for normal shank for metal and wood jobs, 0-900RPM, 0-4350BPM, The Heavy Duty Drill has drilling capacity: 1-1/4 inch for concrete, 1-9/16 inch for wood, 1/2 inch for steel..
  • FOUR FUNCTIONS Use the knob hammer drill switch to switch between Demolition Chisel Hammer Drill to make holes with rotary drill SDS bits, Electric Hammer Chiseling both positions ideal for projects on Concrete, Brick, Granite, etc., and normal Drill Position ideal for drilling and making holes in wood, metal, aluminum, etc. the last function Position Adjustment help you to chose the chisel position makes your job easy, you can use adjust depth gauge to preselect drilling depth for blind holes..
  • VARIABLE SPEED pre-selection speed wheel to set the right speed for every job attached to HEAVY DUTY Soft-grip Handle for comfortable handling and optimal control with Vibration Reduction System ensures optimal working comfort and low vibrations side handle for secure two-handed control and low vibrations while using the electric chisel hammer.
Check Stock