Top Concrete Anchor Bolt Washer Reviews

BoltHold - SP58 Zinc-Plated Asphalt Anchor 1-1/4 x 10 - with 1.5 Hex Bolt & 2 Washer - Chemical Anchors - for Installation of Sheds Carports Bike Racks & More - 5000 lb Pull Rated - 6 PK

  • ZINC-PLATED ASPHALT ANCHORS: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. Measuring 10" long, these SP58 Zinc-Plated Steel Anchors incorporate a 5/8"-11 UNC (coarse) female thread and are pre-installed with a 1.5" long bolt and a 2" diameter washer. Set includes 6 anchors..
  • OUR STRONGEST ANCHOR: Pull rated for 5000 lb! Designed for a very heavy load, BoltHold SP58 chemical anchors resist at least 5,000 pounds pull and 2,500 pounds of high shear force at ground level. Rated for >720 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing....
Check Stock

BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors 5/8 x 6 with EPX2 Anchoring Cement - For Installation of Sheds Carports Bike Racks & More

  • ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
  • LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installi....
Check Stock

Drive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000

  • Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
  • Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
  • The washer on the anchor retains the pin and guides it during the driving installation..
  • Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
  • 304 Stainless steel is durable and rust resistant.
Check Stock

Arrested Development

  • STRONG FIXED ABILITY - Our concrete wall anchors are made of high quailty plastic. Combined with lag bolt sturdily on the concrete or brick wall..
  • WIDE APPLICATION - Need to mount your TV on concrete or brick wall but no anchors? Our anchors for concrete or brick wall can help you..
  • EASY INSTALLATION - With the corresponding hole in the wall, it is easy to hammer the anchor bolt into the wall..
  • BASIC INFORMATION - Rod Diameter: 10mm/3/8”, Total length: 50mm/2”. Package Content: 6 pcs concrete wall anchors in one pack..
  • WORLD-CLASS CUSTOMER SERVICE - Our customer service team is glad to provide support on pre-purchase or installation problems for customers at any time..
Check Stock

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
  • INTERNAL THREADS-Bolt can be removed easily.
  • BOLT EXPANDS ANCHOR-No need for setting tools.
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.
Check Stock

Grip Rite Prime Guard 5812AB25 Grip Rite BRIGHT Finished Anchor Bolt with Nut and Round SAE Washer 5/8-inch by 12-inch 25 per box

  • For Attaching Bottom Plate or Sill Plate to Newly Poured Concrete Foundation.
Check Stock

CONFAST 3/8\ Lag Shield Anchor Long (12 per Box)

  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
  • Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

TOGGLER SNAPTOGGLE BDS Toggle Anchor 304 Stainless Steel Channel Made in US,3/8 to 2-1/2 Grip Range For 1/2 -13 UNC Fastener Size Pack of 25

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/2"-13 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 275 lb. in 1/2" drywall with a 1/2"-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2"-13 UNC hardened bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Wolf Tooth Precision-Machined Seatpost Clamp

  • The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself..
  • The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force..
  • Lightweight 6061 T6 aluminum, M5 stainless steel bolt with integrated washer.
Check Stock

TOGGLER SNAPTOGGLE BAS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BBS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 50

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock