Top Computer Electrical Panel Saw Reviews

UHPPOTE 125KHz RFID Stand-Alone Door Access Control Keypad Support 500 Users

  • ✅Contactless RFID transponder technology.
  • Doesn't need to connect on the computer, can works alone.
  • ✅The access control machine is made of high quanlity ABS plastic and the panel is made of hard shell rubber film..
  • ✅Lock output current short circuit protection.
  • ✅It is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on..
Check Stock

Chanzon Tactile Tact Push Button Switch 6x6 x5mm Micro Momentary Tact Switch 4 pin 150pcs SPST Pushbutton Switches Dip Touch Switch for Breadboard Arduino PCB Electronic Circuit Board

  • Connector Type: Dip Through Hole Installation.
  • MATERIAL - PPA, High Temperature Resistance: -25.6℉ ~ 179.6℉.
  • Electrical Life: More than 100,000 click.
  • Brass, Sliver Plated: Anti-corrosion and high conductivity perfect for application..
  • APPLICATION - Used For Solderless Breadboard, Electronic Circuits, Arduino, PCB, Electronics Board, Electrical Control Panel, Solder, Computer, Audio, Electric Circuit, LED, Etc..
  • HOW DO TACTILE SWITCH WORK - Pins 1 & 2, 3 & 4 are internally connected, to get a switch action you need to connect one side of your circuit to pins 1 & 2 and the other side to pins 3 & 4, PICTURE 3..
  • Comes with small momentary push-button 6x6mm x 5mm 4 pins miniature soft press tactile dome switch sensitive..
Check Stock

Medical Electric Plaster Saw Cast Cutter Orthopedic Sports Medicine 110V 12500rpm/min one set of plaster saw

  • The electrical machinery uses the double insulation protective device, has guaranteed the safety of patient.
  • Anti-shock type, degree and protection against harmful into the liquid level points: medical saw is II type.B is common tyoe.
  • Divided by the work of system: medical electric plaster saw is running short.
  • The electrically operated gypsum saws through the saw blade swinging sawing gypsum, in use, even if the saw blade will contact the patient skin not to create cuts.
  • Scope of application: the orthopedic products for fixed reset, remove the plaster bandages used.
Check Stock

SD STUDIO DESIGNS Overlord Gaming Table, Black,red

  • Powder Coated Steal Frame Resists Scratches and Corrosion, Rear Panel and Four Floor Levelers Provide Stability. Product Weight: 44 lbs..
  • Material: 50% MDF, 40% Steel, 8% Electrical outlet, 2% Plastic. Wood Material Information: MDF. Overall Dimensions: 52"W x 24"D x 30"H.
  • 45.25" Wide x 23.5"Deep Desktop Has Simulated Carbon Fiber Finish with Beveled Front. Can be Used as a Computer Desk or Game Table..
  • 2" Wide Cable Management Hole with Cover, and Power Hub with Three Receptacles and Two USB Ports..
  • Metal Cup Holder and Hook for Headphones Keep the Table Top Clear. Country of Origin: China..
Check Stock

Gunpla 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)

  • DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
  • HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
  • SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
  • APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

SD STUDIO DESIGNS Challenger Gaming Table, Black,silver

  • Powder Coated Steal Frame Resists Scratches and Corrosion, Rear Panel and Four Floor Levelers Provide Stability. Product Weight: 45 lbs..
  • Material: 50% MDF, 40% Steel, 8% Electrical outlet, 2% Plastic. Wood Material Information: MDF. Overall Dimensions: 53"W x 25"D x 35.5"H.
  • 47.5" Wide x 23.75" Deep Desktop Has Simulated Carbon Fiber Finish with Beveled Front. Can be Used as a Computer Desk or Game Table..
  • 2" Wide Cable Management Hole with Cover, and Power Hub with Three Receptacles and Two USB Ports..
  • Metal Cup Holder and Hook for Headphones Keep the Table Top Clear. Country of Origin: China..
Check Stock

Concrete Saw 14 Electric Demo Saw Concrete Cutter 5800W Circular Saw with Blade and Pump Wet Dry Cutting for Concrete Marble Granite Light Bricks Wood 110V

  • 14‘’Adjustable Diamond Saw Blade: This electric concrete saw with a large-size sharp saw blade, maximum cutting depth is 5.3" with segmented axles....
  • Dry/Wet Dust Free Cutting: This circular saw is equipped with a water pump and water pipe fitting. The water pipe is used to supply water to the saw....
  • Flexible Concrete Saw : The flexible concrete cutter is equipped with 2 handles(4.7L”*4.7W), the front handle can be rotated 180°, and the rear....
  • Built-In Copper Motor: 110v, 5800w motor adopts stacked height increase winding technology, which makes the motor power strong and does not consume....
  • Widely Use: The powerful electric cutting machine is suitable for indoor and outdoor use. It can be used for plumbing and electrical engineering....
Check Stock

Gunpla 3 Pieces 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)

  • DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
  • HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
  • SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
  • APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

Makita EK7301X1 14' 73 cc Power Cutter with Diamond Blade

  • Improved decompression valve and metering spring for precise fuel regulation at start up..
  • Ignition coil with start-support function stores electrical energy with each pull for easier start ups.
  • On-Off-Choke operation switch on a single lever for operator convenience.
  • Five stage filtration system with advanced directional air flow, provides cleaner air for better saw performance.
  • Starter grip decompression valve for faster starting.
  • Carburetor engineered with improved deco-valve and metering spring for precise fuel regulation at start up.
  • Reinforced aluminum blade guard with 70 Degrees range of limitless positioning using a marked knob handle.
  • Cutting arm position simply changes from center position to flush outboard position allowing cuts directly adjacent to work.
  • New ignition coil with start-support function stores electrical energy with each pull for easier start ups.
  • Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank.
Check Stock

DEWALT DW3103 Series 20 10-Inch 32 Tooth ATB Thin Kerf General Purpose Saw Blade with 5/8-Inch Arbor

  • Thin kerf for fast and smooth cutting action.
  • Computer balanced plate reduces vibration for improved accuracy and better finish.
  • Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy.
Check Stock

DARENYI Black ABS Plastic Sheets 1/8 Thick Plastic Board Sheet Flexible Than Plexiglass Sheet Moldable Than Acrylic Sheet Moldable Plastic Sheets for Craft Fender Liner, Home Decor etc(16 x 12'')

  • 【Flexible and Solid】 ABS plastic sheet is good impact resistance, and can be bent within reasonable angles when bearing force, then recover when the force is gone. Compared with plexiglass sheet, ABS sheet is flexibler and stronger.
  • 【Easy Thermoformable and Process】-- Black abs sheet is easy to thermoform, just heat it to 93℃ (around 200℉) then make it bow to the angles you want, and hold the shape until it cools down. Can be cut easily with table saw, jigsaw, water-jet at room temperature..
  • 【Size】-- black plastic sheet is 16 x 12 x 0.12inches/40 x 30cm x 3mm, great for various craft DIY..
  • 【Multipurpose Use】-- Abs plastic panel can be applied for car, home decor, building model, electronic device, robotics competition. Great for making switch panel, drawer divider, waterproof application, etc..
  • 【Features】- Very good impact strength, stability, dyeability, easy to thermoform and proces. High mechanical strength, low water absorption, good corrosion resistance, harmless and odorless, with excellent chemical properties and Electrical insulation performance..
Check Stock

Medical Electric Plaster Saw Cast Cutter Orthopedic Sports Medicine 110V 12500r/min FDA Approval)

  • ...tor may have issues in the long run due to dust).
  • ✄ PRODUCTS CLASSIFICATION -- 1.Anti-shock type,degree and protection against harmful into the liquid level points:medical saw is II type.B is common tyoe. 2.Divided by the work of system: medical electric plaster saw is running short..
  • ✄ SAFE & RELIANLE -- The electrically operated gypsum saws through the saw blade swinging sawing gypsum,in use,even if the saw blade will contact the patient skin not to create cuts.the electrical machinery uses the double insulation protective device,has guaranteed the safety of operators and patient..
  • ✄ HIGH QUALITY -- This plaster saw has FDA approval, uses micro imported motor with low noise, small vibration, more powerful and reliable with faster speed, did not overheat. Alloy blade is suitable for long time use. It comes with a foam padded travel case, and it is sturdy and well made..
  • ✄ SPEED ADJUSTABLE -- Speed adjust from large to small, in the actual test 1-5 gear, The closer it is to the skin, the slower it should be, turn to low gear..
Check Stock

Transparent Table Saw Protective Cover,Professional Plastic Shield Case for 12inch Table Saws Blade Guard &Dividing Cutter

  • ★【Transparent Saw Cover】The transparent saw cover effectively prevents dust from entering the table and can effectively protect the table saw from dust and dirt. with output tools, it is helpful for woodworking..
  • ★【Practical Material】This 12 inch table saw protective cover + dividing knife is made of plastic, durable and light. the utility parts used by workers make the machine more durable..
  • ★【Main Parameter】Maximum Length: 450mm.
  • Working Length: 360mm (Maximum Diameter Of Saw Blade).
  • Working Height Of Dividing Knife (Maximum): 200mm.
  • Outer Diameter Of Dust Collection Interface: 32mm.
  • ★【Wide Application】This 12 inch table saw protective cover + dividing knife is suitable for 12 inch flip saw, electric circular saw, sliding table saw, panel saw, etc. 12-inch table saw..
  • ★【100% Satisfaction Guarantee】We ship directly from the US warehouse about 5-7 business days to delivery. We have a Professional Customer Service Team to Reply You within 24 hours.If you have any questions or concerns, Feel free to contact us!We will provide the best suitable solutions for you..
Check Stock