Top Compression Brass Fitting Reviews

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)

Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

(KAS) Double Coil Icemaker Water Fill Valve for Whirlpool Kenmore Refrigerator Icemaker 4318046 WV8046 2188542

WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing, for retro fitting from garden hose connection, a mounting bracket & screws. It has 1/4″ & 5/16″ compression fittings on inlet & 1/4″ on outle.
Detailed installation instructions included..
Replacement for numbers 2002182, 4210533, 627403, 627431, 627580, 627859, 627890, 627937, 627963, 628164, 628184, 628185, 628238, 628275, 628295, 819493, 850733, 876070, 2188542, AP3103466 and PS358630..

Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....

Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

✅ [QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon t....

Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....

Check Stock

Maxline M8067 Elbow Fitting for 3/4-Inch Tubing (3 Pack)

3 Pack of the MaxLine M8067 Elbow Fitting for 3/4" Tubing.
Nickel plated brass fitting guards against corrosion.
Double O-ring compression style fitting, tubing can be removed from fitting if needed.

Check Stock

Maxline M8067 Elbow Fitting for 3/4-Inch Tubing (2-Pack)

2 Pack of the MaxLine M8067 Elbow Fitting for 3/4" Tubing.
Nickel plated brass fitting guards against corrosion.
Double O-ring compression style fitting, tubing can be removed from fitting if needed.

Check Stock

Parker A-Lok 4NU4-B Brass Compression Tube Fitting, Nut, 1/4\ Tube OD

Nut tightens and provides compression on the ferrule of a flareless fitting.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
For use with a twin ferrule compression fitting set for a leak-resistant seal in high-pressure applications.

Check Stock

Joywayus 40PCS 3/8 Tube OD Brass Compression Insert Tube Fitting

Suitable for the outer diameter of the pipe:3/8"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Check Stock

Joywayus 40PCS 5/16\ Tube OD Brass Compression Insert Tube Fitting

Suitable for the outer diameter of the pipe:5/16"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Check Stock

Maxline M8003 Straight Fitting for 3/4-Inch Tubing with 3/4-Inch Male NPT Thread

Nickel plated brass fitting guards against corrosion.
Double O-ring compression style fitting, tubing can be removed from fitting if needed.

Check Stock