Top Compressed Air Dryer For Auto Paint Reviews

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 75 CFM GOOD FOR 15HP & 20HP COMPRESSORS WITH PRE-FILTERS

NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN) 11oz METAL BOWL.
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES 99.98% REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH 11oz METAL BOWL AND INTERNAL FLOAT DRAIN (AUTO DRAIN).

Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Compressors with Pre-Filter

NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS. IF YOU NEED PRE-FILTER WITH REGULATOR, PLEASE SELECt " REGULATOR PRE-FILTER" OPTION ABOVE.
STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Air Compressors with Regulator Pre-Filter

NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR/PRESSURE REGULATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: ADJUSTABLE 7 - 175 PSI PRESSURE REGULATOR + GAUGE / WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

Van Air Systems 80-1500 D8 Compressed Air Dryer, Includes 1 µm F200 Series After-Filter and 1 50 lb Dry-O-Lite Desiccant, No Power Requirement/Moving Parts, Outdoor or Indoor Installation, 50 CFM, 3/4\ NPT, White (Pack of 3)

Dew point suppression of 20⁰ F below compressed air temperature.
No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
Includes model D8 dryer vessel, model F200-55-1/2-B-MD-PD6 after-filter, one 50 lb pail of Dry-O-Lite desiccant, mounting bracket, and manual ball valve for draining.
Dryer vessel is constructed and stamped per the ASME Code.
Best for spray paint equipment, media blasting, and air tools.

Check Stock

Van Air Systems 80-1501 D12 Compressed Air Dryer, Includes 1 µm F200 Series After-Filter and 3 50 lb Pails of Dry-O-Lite Desiccant, No Power Requirement/Moving Parts, Outdoor or Indoor Installation, 100 CFM, White (Pack of 5)

Dew point suppression of 20⁰ F below compressed air temperature.
No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
Includes model D12 dryer vessel, model F200-100-1/2-B-MD-PD6 after-filter, three 50 lb pails of Dry-O-Lite desiccant, and a manual ball valve for draining.
Dryer vessel is constructed and stamped per the ASME Code.
Best for spray paint equipment, media blasting, and air tools.

Check Stock

3 STAGE HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES METAL BOWLS GREAT FOR PAINT SPRAY AND PLASMA CUTTER 1/2 NPT AUTO DRAIN

1/2" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1.
175 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 175 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. UNIT COMES WITH 2 BAGS DESICCANT BEADS..

Check Stock

3 STAGE HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES METAL BOWLS GREAT FOR PAINT SPRAY AND PLASMA CUTTER 3/4 NPT AUTO DRAIN

3/4" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1.
175 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 175 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. UNIT COMES WITH 2 BAGS DESICCANT BEADS..

Check Stock

1/2 NPT HEAVY DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

...ated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 5oz Metal Bowl With Visible Sight Glass..
STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Metal Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccant Beads..

Check Stock

1 NPT SUPER DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

PLEASE NOTE: 1" NPT MEASURES 1.315" OUTSIDE THREAD DIAMETER IN INCHES. 1" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 11oz Metal Bowl With Visible Sight Glass..
STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads..

Check Stock

3/4 NPT SUPER DUTY Industrial Grade 4 Stages Filter Coalescing Desiccant Dryer Regulator System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

PLEASE NOTE: 3/4" NPT MEASURES 1.050" OUTSIDE THREAD DIAMETER IN INCHES. 3/4" NPT, Industrial Rated 4 Stage Combo Water Filter/ Coalescing Filter/ Desiccant Dryer/ Pressure Regulator System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
175 PSI Max Input. This Unit Will Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer, Then Finally Regulator Your Outgoing Air Pressure.
STAGE 1: Water Trap Filter. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. 11oz Metal Bowl With Visible Sight Glass..
STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 11oz Metal Bowl With Visible Sight Glass..
STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 11oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 4 Bags Desiccant Beads. STAGE4: Pressure Regulator, Regulator Adjusts Output Pressure From 7 To 175 PSI..

Check Stock

3/4 Compressed Air In Line Filter Desiccant Dryer Moisture Water Separator New

Brand new 3/4" NPT compressed air moisture filter desiccant dryer unit. Also included is two refills of desiccant beads..
his filter / desiccant dryer removes water, oil and humidity from compressed air. The desiccant bead dryer will remove water and humidity in the compressed air..
These desiccant beads change color from blue to a light pink when they are saturated and need to be changed. This has a heavy duty aluminum quick release bowl for easy maintenance that provides easy viewing for contents as well as impact protection..
More replacement desiccant beads are available in our (Regulators, Filters & Oilers) ebay store category..
Great for painting, plasma cutters, sandblasting and more!.

Check Stock

Schulz REFRIGERATED AIR Dryer for AIR Compressor, Compressed AIR Systems, 100 CFM, Good for 20HP & 25HP COMPRESSORS (with PRE-Filter)

NEW 100 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED ARROW PNEUMATICS WATER SEPARATOR.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 100 CFM @ 100 PSI / 1.25" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE PRE-FILTER.
STAGE 1: ( ARROW PNEUMATICS F329-10WF3 ) WATER SEPARATOR FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 3 MICRON ELEMENT, INTERNAL FLOAT DRAIN (AUTO DRAIN).

Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 3/4 AUTO DRAIN

3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.

Check Stock